electriQ 25" FHD LED Monitor User Manual

Safety Information

• Read and retain all safety and operating instructions.
• Heed all warnings on the appliance and in the instructions.
• Follow all operating and usage instructions.
• Do not use near water or in humid environments (e.g., wet basement, swimming pool).
• Clean only with a dry cloth; avoid solvents or petroleum-based fluids.
• Do not block ventilation openings.
• Do not install near heat sources (radiators, stoves, amplifiers).
• Do not tamper with the supplied plug (BS1363 standard).
• Protect the power cord from being walked on or trapped.
• Use only manufacturer-specified attachments/accessories.
• Use only with a manufacturer-specified cart, stand, tripod, bracket, or table; exercise caution when moving.
• Unplug during lightning storms or when unused for long periods.
• Refer all servicing to qualified personnel. Servicing is required if the power cord/plug is damaged, liquid is spilled, objects fall into the apparatus, it's exposed to rain/moisture, it doesn't operate normally, or it has been dropped.
• Keep the unit in a well-ventilated environment.
• Connect only to a mains power supply as rated on the back of the equipment.
• Do not share the power supply socket with too many other electronic components to prevent overload.
• Do not place connecting wires where they can be stepped on or tripped over.
• Do not place heavy items on the cable.
• When removing from a socket, hold by the plug, not the wires.
• Disconnect power and seek professional help if the plug/cable is damaged, liquid has spilled, it's exposed to water/moisture, objects penetrate ventilation slots, or it does not work normally.
• Do not remove safety covers; no user-serviceable parts inside. Self-servicing is dangerous and may invalidate the warranty.
• Do not block ventilation slots on the back cover. Ensure at least 5cm (2") clearance around the monitor if placed in a cabinet.
• Do not tap or shake the screen, as this may damage internal components.
• WARNING: To reduce the risk of fire or electric shock, do not expose to rain or moisture. Avoid dripping, splashing, and placing liquid-filled objects (like vases) on the apparatus.
• WARNING: The wall plug socket serves as the disconnection device and must remain accessible.
• WARNING: Batteries should not be exposed to excessive heat (direct sunlight, fire).
• Manual accuracy may vary due to continuous product development.
• Feature availability and settings may vary based on input source and connection method.
• Available resolutions and refresh rates may be limited by the source device's capabilities.

Warning Symbols:

• ? This warning sign indicates dangerous voltage inside the product.
• ⚠️ CAUTION: RISK OF ELECTRIC SHOCK. DO NOT OPEN. Refer servicing to qualified personnel.
• ? This warning sign alerts to important instructions accompanying the product.

Hearing Warning: AT FULL VOLUME, PROLONGED LISTENING MAY DAMAGE THE USER'S HEARING.

What's Included

The package typically includes:

• User Manual
• Power Supply
• Power Cable
• DP Cable

Monitor Dimensions:

The monitor has a screen size of 25 inches with a 16:9 aspect ratio. Key dimensions are provided in technical drawings, showing width (approx. 558.1 mm), height (approx. 434.1 mm), and depth.

Connections

The monitor features the following ports:

• DC 12V Power Input
• DP1 (Display Port 1.2, up to 280Hz, Free Sync)
• HDMI 1 (HDMI 2.0, up to 240Hz, Free Sync)
• HDMI 2 (HDMI 2.0, up to 240Hz, Free Sync)
• DP2 (Display Port 1.2, up to 280Hz, Free Sync)
• AUDIO OUT

Wall Mounting

The monitor is equipped with VESA mounting holes (100x100mm pattern). A VESA-approved wall mounting bracket is not supplied. Use M6 x 10 screws; do not use longer screws as they may damage internal components. For installation, especially due to the monitor's weight, consult a professional wall mount installer.

Getting Started & Monitor Controls

Power: Press the middle of the joystick to turn the monitor on. Press it again to enter the OSD menu.

Joystick Controls:

• UP: Change value on selected menu / Navigate up in OSD.
• DOWN: Change value on selected menu / Navigate down in OSD.
• LEFT: Change value on selected menu / Move left in OSD.
• RIGHT: Change value on selected menu / Move right in OSD.

Lamp Button: Press to change the light color; press and hold to turn off the light.

Shortcut Buttons

The monitor offers shortcut options accessible via the rocker switch (joystick):

Initial Setup

1. Connect the monitor to a power socket.
2. Press the POWER button to turn on the monitor (indicator light will be blue).
3. Connect the appropriate cable (DP or HDMI) to the monitor's input port. The source will be automatically detected.
4. To change inputs manually, use the joystick to enter the source menu and select between DP1, HDMI1, HDMI2, and DP2.

Menu Options

The monitor's menu system is accessed by pressing the joystick twice. It includes sub-menus for Input Select, Manual Image Adjust, Colour Adjust, View Mode, Audio Adjust, and Setup. Details for each are provided below.

Input Source

Allows selection of the signal source:

• DP1
• DP2
• HDMI1
• HDMI2

Colour Settings

Manual Image Adjust

Audio

Setup Menu

View Mode

Selectable display modes for different content types:

Specifications

Troubleshooting

Environmental Protection

Recycling facilities are available for customers to deposit old electrical products at participating civic amenity sites run by local councils. Please be considerate during the recycling process. Contact your local council for details on household waste recycling centres.

[Recycling symbol description]

electriQ UK Support

For support, visit: www.electriQ.co.uk/support

Call: 0330 390 3061

Office hours: 9AM - 5PM Monday to Friday

Website: www.electriQ.co.uk

Address:

Unit J6, Lowfields Business Park
Lowfields Way, Elland
West Yorkshire, HX5 9DA