Arboleaf® Body Composition Smart Scale User Guide

WARNING

Please read carefully before use:

• Do not use if you have a pacemaker, or any other internal medical devices in your body.
• Do not use if you are pregnant.
• Do not use on slippery floors.
• Do not use when your body is wet.

CAUTION

• Your body compositions may not be accurate after shower or heavy physical activities.
• This smart scale model is not intended for use by infants or toddlers. Some body composition measurements are not for children under 18.
• Arboleaf smart scale should not be used for treating or diagnosing any medical conditions. Always consult your physician or health professional to determine what is suited for you.

Package Contents

1. Smart Scale
2. 3 AAA Batteries
3. User Guide

Specifications

• Dimensions: 11.8" x 11.8" x 1.0" (300mm x 300mm x 25mm)
• Weight: 3.6lb (1.6kg)
• Measurement Range: 0.4 – 396lb (0.2 – 180kg)
• Measurement Resolution: 0.2lb (0.1kg)
• Power: 3 AAA batteries

Power Up Scale

Your scale shipment comes with 3 AAA batteries. Put the batteries in the battery compartment. Your scale should display 0.0. The scale is ready for use.

Initial Setup

Step 1: Download “Arboleaf” app and create an account

From Apple App Store (iOS) or Google Play (Android), search for “Arboleaf” and download it to your smart phone. You can also scan the QR code to download.

[QR code for app download] Register an account

Step 2: Pair scale with smartphone

Make sure Bluetooth is enabled on your phone. For Android 6.0 and above, Location needs to be enabled. Pairing is done automatically. Bluetooth icon displays on the scale.

[Smartphone icon] [Foot on scale icon]

Take Measurements

Keep your app open on "Measurements" screen.

[Foot on scale icon] Apply pressure to turn on Scale, wait for “CAL” back to "0.0"

[Feet on scale icon] Step on the scale barefoot until numbers are stable

[Smartphone with measurement icon] Check measurements

136.0 lb (Normal working) | No display (Change battery) | 136.0 lb (No wireless connection)

Lo (Change battery) | EEr (Overload) | CAL (Calibrating)

When the display number flashes twice, it indicates that the weight measurement has finished. When the number 0 stops moving back and forth, the body fat and other body composition measurements have completed.

Measurement Tips

To have accurate, consistent and comparable measurement results, there are some DOs and DON'Ts.

DO's

• Place the scale on a flat hard surface.
• Stand straight on the scale with barefoot, no socks and no shoes. Both feet uniformly touch the four metal electrodes.
• Do calibration each time. Wait for “CAL” back to “0.0” then step on the scale for measurements.
• Use the scale under the same condition during same hour each day.
• Empty your bladder before weighing.

DON'Ts

• Do not measure with socks or shoes on.
• Do not measure during or immediately after a strenuous exercise.
• Do not measure immediately after shower, bath or sauna.
• Do not measure after heavy alcohol consumption.
• Do not measure when you have a fever.

Measurement Tips (Continue)

[Checkmark icon] Correct placement of feet on scale | [Cross mark icon] Incorrect placement of feet on scale

[Checkmark icon] Feet uniformly touching conductive areas | [Cross mark icon] Feet not uniformly touching conductive areas

Scale Display

136.0 lb (Normal working) | No display (Change battery) | 136.0 lb (No wireless connection)

Lo (Change battery) | EEr (Overload) | CAL (Calibrating)

Trouble Shooting

No wireless connection between your scale and the app

1. Reinstall Arboleaf app. Exit from the app (go to "My Account" -> "Settings" -> "Exit" at bottom), then delete the app. Go to Apple App Store or Google Play to install Arboleaf app again.
2. Turn off Bluetooth then turn on Bluetooth again (go to your phone's Settings).
3. For Android 6.0 and above, Location needs to be enabled.
4. Power on reset your scale. Pull out batteries from your scale and put them back in.

A non-zero number on scale

Your scale needs another reset.

1. Pull one battery out from your scale and put it back.
2. IMMEDIATELY place the scale on a hard flat surface.
3. After you see the scale displays 0.0, close the battery cover.

Warranty Registration

https://arboleaf.com/warranty