GIGABYTE B850M EAGLE WIFI6E ICE Motherboard Installation Guide

Introduction

This document provides comprehensive instructions for installing and configuring the GIGABYTE B850M EAGLE WIFI6E ICE and B850M EAGLE WF6E motherboards. It covers hardware installation, BIOS setup, software utilities, and regulatory information.

Key features include the AMD AM5 socket, support for AMD Ryzen™ 9000/8000/7000 Series Processors, DDR5 memory, PCIe 5.0 support, Realtek® 2.5GbE LAN, and integrated Wi-Fi 6E with Bluetooth 5.3.

Motherboard Layout

The motherboard features a Micro ATX form factor (24.4cm x 24.4cm). The layout is designed for efficient component placement and connectivity:

• CPU Socket: AMD AM5 socket (Socket AM5) for compatible AMD Ryzen™ processors.
• Memory Slots: Four DDR5 DIMM slots (DDR5_A1, DDR5_A2, DDR5_B1, DDR5_B2) supporting dual-channel memory configurations and AMD EXPO™/XMP profiles.
• Expansion Slots:
  • 1 x PCI Express x16 slot (PCIEX16) supporting PCIe 5.0 x16 (for AMD 9000/7000 Series CPUs) or PCIe 4.0 x8 (for AMD 8000-Phoenix CPUs).
  • 1 x PCI Express x4 slot (PCIEX4) supporting PCIe 3.0 x4.
• Storage:
  • 2 x M.2 connectors (M2A_CPU, M2B_CPU) supporting M.2 PCIe SSDs (PCIe 5.0 x4/x2 for AMD 9000/7000, PCIe 4.0 x4/x2 for AMD 8000-Phoenix) and M.2 SATA SSDs.
  • 4 x SATA 3.0 connectors supporting RAID 0, RAID 1, RAID 5, and RAID 10.
• Power Connectors: 1 x 24-pin ATX main power connector, 1 x 8-pin ATX 12V power connector.
• Fan Headers: Multiple 4-pin headers for CPU fans (CPU_FAN, CPU_OPT), system fans (SYS_FAN1), and fan/pump combinations (FAN2_PUMP).
• Internal USB Headers:
  • 1 x USB Type-C® header (USB 3.2 Gen 2).
  • 1 x USB 3.2 Gen 1 header (FU3A_5G).
  • 2 x USB 2.0/1.1 headers (FUSB_1, FUSB_2).
• Front Panel Header (F_PANEL): For power button, reset button, HDD LED, and power LED.
• Front Panel Audio Header (F_AUDIO): For front panel headphone and microphone jacks.
• RGB Headers:
  • 1 x RGB Gen 2 LED header (LED_C) for 12V RGB devices.
  • 3 x Addressable RGB Gen 2 LED headers (ARGB_V2_1, ARGB_V2_2, ARGB_V2_3) for 5V addressable RGB devices.
• Other Internal Connectors: SPI_TPM header, RST (Reset) header, CLR_CMOS jumper.
• Rear I/O Panel: Provides connectivity for external devices.

Diagram Description (Page 1-1): The diagram shows the physical layout of the motherboard, indicating the positions of the CPU socket, RAM slots, PCIe slots, M.2 slots, SATA ports, various headers (USB, fan, front panel, audio, RGB), power connectors, and the rear I/O panel.

Component List

The motherboard package typically includes:

• 1 x Motherboard (B850M EAGLE WIFI6E ICE / B850M EAGLE WF6E)
• 1 x User Manual
• 1 x Hardware Installation Guide
• 1 x Antenna
• 2 x SATA Cables
• 1 x G Connector
• M.2 Screws

CPU and Chipset

CPU Support: The motherboard supports AMD AM5 socket processors, specifically the AMD Ryzen™ 9000 Series, AMD Ryzen™ 8000 Series, and AMD Ryzen™ 7000 Series processors.

Chipset: AMD B850 Chipset.

Diagram Description (Page 2-1): Illustrates the AMD AM5 socket and the CPU installation process, highlighting the alignment mark (triangle) on the CPU and socket.

Specifications

Detailed specifications for the GIGABYTE B850M EAGLE WIFI6E ICE / B850M EAGLE WF6E motherboard:

Diagram Description (Page 2-2): This page details the technical specifications of the motherboard, covering CPU, chipset, memory, graphics, audio, networking, expansion slots, storage, USB ports, internal connectors, rear I/O, BIOS features, and operating system support.

CPU Installation

Follow these steps to install the CPU:

1. Ensure the system is powered off and unplugged.
2. Open the CPU socket retention arm by pushing down and away from the socket.
3. Align the triangle mark on the CPU with the triangle mark on the socket.
4. Gently place the CPU into the socket. Do not force it.
5. Close the CPU socket retention arm by pushing it down until it clicks into place.

Diagram Description (Page 2-3): Illustrates the CPU installation process, showing how to open the retention arm, align the CPU using the triangle markers, and close the arm securely.

DRAM Installation

Install DDR5 DIMMs into the DIMM slots. For dual-channel operation, install DIMMs in the recommended slots (e.g., DDR5_A1 and DDR5_B1, or DDR5_A2 and DDR5_B2). Refer to the motherboard layout for slot identification.

Diagram Description (Page 2-4): Shows the DDR5 DIMM slots and explains the dual-channel configuration by indicating which slots should be populated for optimal performance.

PCIe Device Installation

Install graphics cards or other expansion cards into the PCI Express slots. The PCIe EZ-Latch Plus feature allows for easy removal of PCIe devices.

Diagram Description (Page 2-5): Demonstrates how to install and remove a graphics card from the primary PCIe x16 slot, highlighting the PCIe EZ-Latch Plus mechanism.

Display, Audio, LAN, and Wireless Connectivity

• Display Outputs: Supports HDMI 2.1 (up to 4K@60Hz) and DisplayPort 1.4 (up to 4K@144Hz) for high-resolution video output.
• Audio: Integrated Realtek® High Definition Audio CODEC provides 2/4/5.1/7.1 channel audio.
• LAN: Equipped with a Realtek® 2.5GbE LAN controller for high-speed wired networking.
• Wireless: Features a Realtek® Wi-Fi 6E RTL8852CE module for 802.11ax wireless connectivity and Bluetooth 5.3.

Diagram Description (Page 2-6): Illustrates the rear I/O panel, detailing the placement and function of display ports (HDMI, DP), USB ports, LAN port, PS/2 port, Q-Flash Plus button, and audio jacks.

Q-Flash Plus and POST Status LEDs

Q-Flash Plus: This utility allows you to update the BIOS even without a CPU, memory, or graphics card installed. Connect a USB drive with the BIOS file to the designated USB port on the rear I/O panel and press the Q-Flash Plus button.

POST Status LEDs: Four LEDs (CPU, DRAM, VGA, BOOT) on the motherboard indicate the status of key components during the Power-On Self-Test (POST) process, helping to diagnose startup issues.

Diagram Description (Page 2-7): Shows the location of the Q-Flash Plus button and the POST Status LEDs on the motherboard, and explains their function in system diagnostics.

Internal Connectors

Detailed descriptions of internal connectors:

1. 12V_2X4 (8-Pin CPU Power) & ATX (24-Pin Main Power): Connectors for supplying power to the motherboard and CPU.
2. CPU_FAN & SYS_FAN1 (4-Pin Fan Headers): Connect CPU and system fans for cooling.
3. FAN2_PUMP (4-Pin Fan/Pump Header): For connecting case fans or water cooling pumps.
4. CPU_OPT (4-Pin CPU Fan Header): An optional header for a second CPU fan or system fan.
5. BAT (CMOS Battery Connector): Connects the coin cell battery for CMOS memory.
6. LED_C (4-Pin RGB LED Header): For connecting standard 12V RGB LED strips.
7. ARGB_V2_1/ARGB_V2_2/ARGB_V2_3 (3-Pin Addressable RGB Gen 2 Headers): For connecting 5V addressable RGB LED strips.
8. SATA3 0/1/2/3 (SATA 3.0 Connectors): For connecting SATA storage devices (HDDs, SSDs). Supports RAID configurations.
9. M2A_CPU & M2B_CPU (M.2 Connectors): For installing M.2 SSDs (NVMe or SATA). Supports various M.2 lengths and PCIe generations. Features EZ-Latch Plus for tool-less installation.
10. F_PANEL (Front Panel Header): Connects the case's power button, reset button, HDD LED, and power LED.
11. F_AUDIO (Front Panel Audio Header): Connects front panel audio jacks (headphones, microphone).
12. FU3C_10G (USB Type-C® Header): Supports USB 3.2 Gen 2 speeds for front panel USB Type-C ports.
13. FU3A_5G (USB 3.2 Gen 1 Header): Supports USB 3.2 Gen 1 speeds for front panel USB ports.
14. FUSB_1/FUSB_2 (USB 2.0/1.1 Headers): For connecting front panel USB 2.0 ports.
15. SPI_TPM (TPM Header): For connecting a Trusted Platform Module for enhanced security.
16. RST (Reset Header): Provides a physical reset button connection.
17. CLR_CMOS (CMOS Clear Jumper): Allows clearing the CMOS settings to reset BIOS to default.

Diagram Description (Page 2-8 onwards): These pages provide detailed diagrams and pinout descriptions for each internal connector on the motherboard, explaining their function and connection points.

BIOS Setup

Access the BIOS Setup utility by pressing the Delete key during system startup. The BIOS provides settings for system configuration, hardware management, and boot order.

• Q-Flash: A utility within the BIOS for updating the motherboard's firmware. Access via End key.
• Boot Menu: Access the boot device selection menu by pressing F12 during system startup.

Diagram Description (Page 30-31): Illustrates the BIOS interface, including options for BIOS Setup, Q-Flash, and the Boot Menu, along with key combinations for access.

RAID Configuration

The motherboard supports RAID configurations for SATA and M.2 NVMe SSDs, allowing for data redundancy or improved performance. RAID can be configured via the BIOS settings or through GIGABYTE Control Center (GCC).

RAID Levels Supported:

GIGABYTE Control Center (GCC): GCC is a software suite that allows users to manage various motherboard features, including RGB lighting, fan control, and system monitoring. It can also assist with driver downloads and BIOS updates.

Diagram Description (Page 32-34): These pages explain how to configure RAID arrays in the BIOS and using the AMD RAID driver, and how to install and use the GIGABYTE Control Center software.

Regulatory Notices

This section contains compliance information for various regions, including the United States (FCC), Canada (Industry Canada), European Union (CE, RoHS, WEEE), and China (RoHS).

Key Compliance Statements:

• FCC: Complies with Part 15 of FCC Rules.
• Canada: Complies with Industry Canada license-exempt RSS standards.
• EU: Complies with Electromagnetic Compatibility Directive, Low-voltage Directive, Radio Equipment Directive, RoHS directive, and WEEE directive.
• China RoHS: Indicates the environmentally friendly use period for hazardous substances.

Battery Warning: Contains a button cell battery (CR2032). Ingestion hazard; keep away from children and seek immediate medical attention if swallowed.

Diagram Description (Page 35-39): These pages list compliance statements and warnings in multiple languages (English, French, German, Spanish, Italian, Polish, Czech, Hungarian, Portuguese, Russian), detailing adherence to international electronic device regulations.

Support and Contact Information

For product support, drivers, and the latest BIOS updates, please visit the official GIGABYTE website:

• Website: https://www.gigabyte.cn/
• eSupport: https://esupport.gigabyte.com

Support Hotline: 400-820-9608 (China) or +86-400-820-9608. Support hours are typically 9:00 AM to 6:00 PM.

Diagram Description (Page 40): Provides contact details, website links, and support hotline information for GIGABYTE.