Philips Hue Play Light Bar Extension

Product Overview

The Philips Hue Play light bar extension is designed to enhance your entertainment setup with ambient lighting. It is a Zigbee certified product, compatible with the Philips Hue ecosystem.

What's Included

The package typically includes:

• Hue Play light bar (a)
• Stand (b)
• TV clip (c)
• Screw (d)
• Adhesive disc (e)
• Power adapter (f)
• Cables: 3m and 2.25m

General Usage Information:

• Designed for indoor use only ?.
• Not suitable for use in wet conditions ?☔.
• Class III appliance ?.
• Uses a Type Z power adapter ⚡.
• Recommended for ages 0-14 with adult supervision ?‍?‍?‍?.
• IP20 rated: Protected against solid objects larger than 12.5mm, no protection against water ?.
• Energy efficiency rating: G ⚡.

Installation Methods

Choose the method that best suits your TV setup.

Method A: On TV Stand (Horizontal)

Place the Hue Play light bar horizontally on the TV stand, in front of the television.

To attach the stand:

1. Take the stand (b) and align it with the mounting point on the back of the light bar (a).
2. Insert the screw (d) through the stand and into the light bar. Tighten securely.

Method B: On TV Stand (Vertical)

Place the Hue Play light bar vertically on the TV stand, to the side of the television.

To attach the stand:

1. Take the stand (b) and align it with the mounting point on the back of the light bar (a).
2. Insert the screw (d) through the stand and into the light bar. Tighten securely.

Method C: Behind TV (Clip Mount)

Mount the light bar horizontally to the back of the TV using the provided TV clip (c).

Ensure a minimum distance of 6 cm [Minimum 6 cm] from the TV screen edge.

Steps:

1. Clean the area on the TV back where the clip will be attached using an alcohol wipe [Alcohol Wipe].
2. Peel the backing from the adhesive disc (e).
3. Press the adhesive disc (e) firmly onto the TV clip (c) and hold for 10 seconds [Hold for 10 seconds].
4. Attach the TV clip (c) with the disc (e) to the back of the TV.
5. Slide the Hue Play light bar (a) onto the TV clip (c) until it is securely in place.

Method D: Behind TV (Stand Mount)

Mount the light bar horizontally to the back of the TV using the stand mount (which includes clip c and disc e).

Ensure a minimum distance of 6 cm [Minimum 6 cm] from the TV screen edge.

Steps:

1. Clean the area on the TV back where the clip will be attached using an alcohol wipe [Alcohol Wipe].
2. Peel the backing from the adhesive disc (e).
3. Press the adhesive disc (e) firmly onto the TV clip (c) and hold for 10 seconds [Hold for 10 seconds].
4. Attach the TV clip (c) with the disc (e) to the back of the TV.
5. Slide the Hue Play light bar (a) onto the TV clip (c) until it is securely in place.

Connecting Power

The Hue Play light bar requires a Philips Hue power adapter (f) to operate. One adapter can power up to five Hue Play light bars.

Steps:

1. Connect the power adapter (f) to the power input port on the light bar.
2. Select the appropriate plug type for your region (EU or UK).
3. Attach the plug to the power adapter. A 'click' sound [Click Sound] indicates a secure connection.
4. Plug the power adapter into a wall socket.

Setup and Operation

Once powered on, the light bar will illuminate.

To set up and control your Hue Play light bar:

1. Locate the Hue serial number [Serial Number] on the light bar's cable.
2. Download the Philips Hue app from your device's app store.
3. Follow the instructions in the app to add the light bar to your Hue system, which may involve scanning a QR code or entering the serial number.

For more information, visit: www.philips-hue.com/connectproduct

Support and Information

Manufacturer: Signify

Address: Signify I.B.R.S. / C.C.R.I. Numéro 10461, 5600 VB Eindhoven, the Netherlands

Customer Service Phone: 00800-74454775

Website: www.philips-hue.com

Document Number: 4404 029 10673

Last Update: 05/2021

© 2021 Signify Holding. All rights reserved.