Cooler Master Hyper H410R RGB CPU Cooler

01. Package Content

Verify that all components are present before installation:

• A CPU Cooler Unit (x1)
• B Intel Mounting Bracket (x2)
• C AMD Mounting Bracket (x2)
• D Standoffs for Intel (x4)
• E Push Pins for Intel (x4)
• F AMD Retention Clip (x4)
• G Standoffs for LGA 20XX (x4)
• H Universal Backplate (x1)
• I Screws (x2)
• J Thermal Paste Syringe (x1)
• K Standoff Caps for LGA 20XX (x1)
• L AMD Clip Lever (x1)
• M RGB LED Controller Cable (x1)
• N RGB Remote Control (x1)
• O RGB Fan Cable (x1)

02. Intel & AMD Compatibility

This section illustrates the general appearance of the cooler and its compatibility with Intel and AMD platforms.

Illustration showing the CPU cooler unit and indicating compatibility with Intel and AMD sockets.

03. Intel & AMD Preparation

Before mounting, ensure the protective film is peeled off the cooler's base (A) and apply thermal paste (J) to the CPU surface.

Illustration showing a hand peeling a protective film labeled "Please Peel off" from the cooler base (A) and a syringe (J) dispensing thermal paste onto a CPU socket area.

04. AMD AM4/AM3+/AM3/AM2/FM2+/FM2/FM1 Installation - Step 1

For AMD sockets, attach the AMD clip lever (L) to the cooler unit.

Illustration showing the AMD clip lever (L) being attached to the cooler, with an arrow indicating the direction of attachment. A zoomed view shows the lever mechanism.

05. AMD AM4/AM3+/AM3/AM2/FM2+/FM2/FM1 Installation - Step 2

Position the cooler onto the motherboard's AMD mounting clips.

Illustration showing the cooler being placed onto the motherboard, aligning with the AMD retention clips.

06. AMD AM4/AM3+/AM3/AM2/FM2+/FM2/FM1 Installation - Step 3

Secure the cooler by engaging the AMD clip lever (L).

Illustration showing a hand pressing down on the AMD clip lever (L) to secure the cooler to the motherboard's retention mechanism. An arrow indicates the direction of force.

07. AMD AM4/AM3+/AM3/AM2+/AM2/FM2+/FM2/FM1 Installation - Step 4

For AMD sockets, use screws (b) with the AMD mounting bracket (C). For AM4, use screws (b) with bracket (C). For AM3+/AM3/AM2+/AM2/FM2+/FM2/FM1, also use screws (b) with bracket (C).

Diagrams showing the specific screw placement for AM4 versus other AMD sockets, using bracket (C) and screws (b). An arrow indicates screw insertion.

08. AMD AM4/AM3+/AM3/AM2+/AM2/FM2+/FM2/FM1 Installation - Step 5

For AMD installations, use the universal backplate (H) with standoffs (E) and the AMD retention clip (a) with bracket (D).

Illustration showing the backplate (H) being placed on the rear of the motherboard, with standoffs (E) and the AMD retention clip (a) and bracket (D) being assembled.

09. AMD AM4/AM3+/AM3/AM2+/AM2/FM2+/FM2/FM1 Installation - Step 6

Mount the cooler onto the prepared motherboard assembly. Tighten the screws in a diagonal (cross) pattern (1, 2, 3, 4) to ensure even pressure.

Illustration showing the cooler mounted on the motherboard. Arrows indicate the sequence for tightening screws in a cross pattern (1-2-3-4).

10. Intel LGA 2066/2011-v3/2011/1366/115x/775 Installation - Preparation

This section details the preparation for Intel socket installations. It shows different mounting bracket configurations for LGA 775, LGA 115x, and LGA 2066/2011-v3/2011/1366 sockets.

Diagrams illustrating the specific Intel mounting brackets (B) and standoffs (D/G) required for different Intel socket types (LGA 775, LGA 115x, LGA 2066/2011-v3/2011/1366). Arrows indicate screw insertion (a) and standoff (b) placement.

11. Intel LGA 1366/115x/775 Installation - Step 1

For Intel LGA 1366/115x/775, use the universal backplate (H). Attach the appropriate mounting bracket (F) and standoffs (E) to the motherboard.

Illustration showing the backplate (H) on the rear of the motherboard. On the front, bracket (F) is attached using standoffs (E). Arrows indicate assembly steps.

12. Intel LGA 1366/115x/775 Installation - Step 2

Mount the cooler onto the prepared Intel motherboard assembly. Tighten the screws in a diagonal (cross) pattern (1, 2, 3, 4) to ensure even pressure.

Illustration showing the cooler mounted on the motherboard. Arrows indicate the sequence for tightening screws in a cross pattern (1-2-3-4).

13. Intel LGA 2066/2011-v3/2011 Installation - Step 1

For Intel LGA 2066/2011-v3/2011, use the specific standoffs (G) and caps (K) with the Intel mounting bracket (C). Attach the bracket to the motherboard.

Illustration showing standoffs (G) and caps (K) being screwed into the motherboard, followed by the attachment of bracket (C). Arrows indicate the process.

14. Intel LGA 2066/2011-v3/2011 Installation - Step 2

Mount the cooler onto the prepared Intel motherboard assembly. Tighten the screws in a diagonal (cross) pattern (1, 2, 3, 4) to ensure even pressure.

Illustration showing the cooler mounted on the motherboard. Arrows indicate the sequence for tightening screws in a cross pattern (1-2-3-4).

15. Fan Installation

Attach the fan to the heatsink assembly of the CPU cooler.

Illustration showing the fan being slid onto the heatsink fins, with an arrow indicating the direction of attachment.

16. Fan and RGB Connection

Connect the fan's power cable to the motherboard's CPU_FAN header. Connect the RGB components using the provided cables.

Illustration showing the fan cable connecting to a header labeled "+ FG PWM" on the motherboard. The RGB controller cable (M) connects to the RGB remote (N) and the RGB fan cable (O). The RGB fan cable (O) connects to the fan.

17. RGB Lighting Setup

Connect the RGB fan cable (O) to a compatible RGB header on the motherboard (e.g., labeled "12V GRB") or to the RGB controller (M) which is controlled by the remote (N).

Illustration showing the RGB fan cable connecting to a motherboard header labeled "12V GRB". A separate diagram shows the RGB controller setup with cables M and O connected to the controller box, and the remote N.

The document also contains a QR code which is excluded from this HTML representation.