WI-FI CONTROL SETUP MANUAL
This manual provides instructions for setting up and using the EvoHeat Wi-Fi control system for pool heating units.
AquaTemp App
The AquaTemp app is an optional upgrade for the Fusion-i series and a standard inclusion for the ADVANCED DHP-R and FORCE-i series. It allows for convenient monitoring and control of your pool temperature via smartphone.
The app is available for iOS and Android devices. It enables users to adjust settings, set timers, receive error alerts, and allow remote access for technicians.
For video walkthroughs on setting up the AquaTemp app and other controller videos, visit the EvoHeat YouTube channel: https://www.youtube.com/@evoheatpumps. A specific setup guide can be found here: https://www.youtube.com/watch?v=Z5otJuwINpl.
1.1 Module Diagram
| NAME | LONG LIGHT | SLOW FLASH | |
|---|---|---|---|
| 1 | Network configuration indicator | Configuring Network | SmartLink configuring |
| 2 | Router connection indicator | Normal | Abnormal |
| 3 | Cloud server connection indicator | Normal | Abnormal |
| 4 | 485 communication indicator | Normal | Abnormal |
| 5 | Configuration button |
The Wi-Fi module has a magnet on the back for attachment to the heat pump. It should be installed in a location with minimal direct sunlight and protection from weather elements.
To download the AquaTemp app, search for 'AquaTemp' in your device's app store or scan the provided QR codes for Android and Apple devices.
3. App Setup
3.1 Create an Account
To use the app, you must create an account. Follow these steps:
- Press the 'Account Registration' button and fill in your details.
- Press the button next to 'Enter Email Verification' to send a verification code to your email. Enter this code in the app.
- Read and agree to the privacy policy by pressing the adjacent button.
- Press 'OK' to complete the account registration. Note: The verification code is valid for 15 minutes.
From the login page, enter your registered email and password to log in. A 'Forgot Password' option is available if needed.
3.2 Add Your Device & Configure Wi-Fi
- After logging in, navigate to the 'My Device' screen and press 'Add New Device'. Select the Wi-Fi option.
- Press and hold the button on the Wi-Fi module for one second until two lights illuminate, indicating AP connection is active. Press 'Next'.
- Enter your home router's Wi-Fi password and press 'OK'. Ensure the password is correct.
- Go to your phone's Wi-Fi settings and connect to 'Smart_AP_xxx'. Return to the AquaTemp app and press the button at the bottom of the screen. Confirm joining the connection when prompted and press 'Next'.
- Click the 'Bond Device' button.
- A prompt will appear requesting camera access to scan the barcode on your heat pump. Allow camera access. Once scanned, press 'OK' to finish bonding your device.
4. Device Management
After completing Wi-Fi and DTU bonding, access the 'My Device' menu for various functions:
| ICON | NAME | FUNCTIONS |
|---|---|---|
| ON/OFF | Turn the unit on or off | |
| SILENT MODE | Activate Silent Mode | |
| CHANGE MODE | Select Mode: Heating, Cooling or Auto | |
| TIMER SETTINGS | Adjust timer on/off & mute timer settings | |
| TROUBLESHOOTING | View errors | |
| MENU | Unfold or collapse the menu options |
4. Connection Troubleshooting
If you encounter connection issues, please follow these guidelines:
- Ensure you are connecting to a 2.4 GHz network, not a 5 GHz network. Consult your network provider if unsure.
- Avoid connecting to Wi-Fi boosters or extenders; connect directly to the modem.
- Check signal strength and ensure the distance between the heater and modem is no more than 10 meters. Try moving the modem closer to test.
- Test with a different mobile device and software version to rule out compatibility issues.
If problems persist, contact EvoHeat technical support at 1300 859 933 for assistance.
Contact EvoHeat: info@evoheat.com.au | Phone: 1300 859 933 | Website: www.evoheat.com.au
