Antec CONNECT 120 ARGB Manual
Antec BELIEVE IT
Website: www.Antec.com
Version: V2.2
Copyright © 1986-2024 Antec Inc. All rights reserved.
Contents
- 120MM FAN
- 4-PIN PWM & 3-PIN ARGB CABLE
- FAN COVER
- FAN SCREW
- RADIATOR SCREW
Fan Introduction
This section describes the airflow direction of the fan. Arrows indicate the path of air.
- AIR-IN: Indicates the direction air enters the fan.
- AIR-OUT: Indicates the direction air exits the fan.
Fan Dimensions
Detailed measurements of the fan are provided:
- Width: 120mm
- Height: 120mm
- Fan Thickness: 25mm
- Blade Depth: 7.25mm
- Frame Depth: 3.7mm
Fan Installation
Instructions for installing the fans:
Connecting Fans
Fans can be connected together in series. The diagram shows three fans linked sequentially.
Installing Fan Covers
The fan covers can be attached to the sides of the fan unit. The diagram illustrates this process.
Mounting to Chassis
Fans can be installed in the computer chassis, typically at the front or top. The diagram shows screws being used to secure the fans to the chassis structure.
Mounting to Radiator
Fans can be mounted onto a radiator. The diagram shows the fans being attached to a radiator using screws.
Fan Connection
Instructions for connecting the fan cables:
Connecting the Cable
The included cable is a 4-PIN PWM & 3-PIN ARGB cable, used for both fan speed control and RGB lighting synchronization.
Connecting to Motherboard
The cable connects to the motherboard. The diagram shows the cable's connectors plugging into appropriate headers on the motherboard, which then power and control the connected fans.
