Antec C7 ARGB Mid-Tower Case
Information Guide
Remove Side Panel
- The left side panel is attached via sedimentary means, requiring a reduction in thickness for removal.
- To extract the side panel, it is designed with a sloped cutting board, a sloped board, and a boom edge. The cross-section is approximately 150cm x 150cm.
- The tape for removal is on the Left Side.
- The rear side is the Right Side.
Motherboard Installation
Follow the instructions for motherboard installation. This section details the process of installing the motherboard onto the designated mounting points within the case.
Power Supply Installation
This section describes the process of installing the power supply unit into the Antec C7 ARGB case. The image shows the power supply unit being slid into its bay and secured with screws.
Hard Disk Installation
This section covers the installation of hard disk drives. It includes instructions for installing a 3.5" hard disk drive and a 2.5" solid-state drive.
Installing a 3.5" Hard Disk Drive
Instructions for installing a 3.5" RotoDisk. The image shows a drive being mounted onto a bracket, which is then attached to the case interior.
Installing a 2.5" Solid State Drive
Instructions for installing a 2.5" SSD (Solid State Drive). The image displays multiple SSD mounting locations on a removable bracket.
Liquid Cooling Radiator Installation
This section details the installation of liquid cooling radiators. It shows radiators being mounted to the top and rear of the case, secured with screws. The image indicates the placement for both a top radiator and a rear radiator.
Fan Installation
This section provides guidance on installing fans into the Antec C7 ARGB case. It illustrates the mounting of fans to the top, rear, and side of the case, secured with screws. The image shows multiple fans being attached to the top bracket and the side panel.
ARGB & PWM Fan Controller Connections
This section covers the connections for the ARGB and PWM fan controller. The image shows various fan cables being connected to a central controller unit, facilitating synchronized lighting and fan speed control.