Ring Keypad (5B28S8) Manual & Safety Instructions
Getting Started
In-App Setup
- Ensure your Ring Alarm is disarmed.
- In the Ring app, tap Set Up a Device and find the Keypad in the Security menu.
- Follow the in-app instructions to complete setup.
Device Installation
- Choose a convenient location so you can arm and disarm easily as you come and go.
- You can rest the Keypad on a flat surface or install it on a wall with the bracket and screws provided.
- The Keypad works plugged in or running on the rechargeable battery. Charge the Keypad using the power adapter and USB cable provided.
Wall Mounting
- Place the mounting bracket on the wall, then use the wall anchors and screws from your kit to fasten the bracket to the wall (If using anchors, you should pre-drill holes).
- Slide the Keypad onto the bracket. Screws: 3x 3x21mm. Anchors: 3x 5mm.
If you’re planning to use the Keypad unplugged, you should fully charge it first.
Safety and Compliance Information
General Safety Information
Use Responsibly. Read all instructions and safety information before use.
WARNING! Failure to read and follow these safety instructions before operation could result in fire, electric shock, or other injury or damage.
CAUTION! To reduce the risk of electrical shock, DO NOT open the unit. There are no user serviceable parts inside the unit. Refer to customer support for any repair.
WATCH FOR SMALL PARTS! Your device and accessories may present a choking hazard to small children. Keep them out of reach of small children.
Ring Keypad is for indoor use only. Do not expose your device to liquids. If your device or adapter gets wet, carefully unplug the device without getting your hands wet and wait for the device to dry completely before plugging it in again. Do not attempt to dry your device with an external heat source, such as a microwave oven or a hair dryer. If the device appears damaged, discontinue use immediately. To avoid risk of electric shock, do not touch your device during a lightning storm. When this device is plugged into an electrical socket-outlet, unplugging this device will disconnect it from the AC mains supply. Only plug this device into an easily accessible socket-outlet.
Battery Safety
HANDLE WITH CARE. Your device contains a rechargeable lithium ion polymer battery and should be replaced only by a qualified service provider. Do not disassemble, open, crush, bend, deform, puncture, shred or attempt to access the battery in your device. Do not modify or remanufacture the battery, attempt to insert foreign objects into the battery, or immerse or expose it to water or other liquids, expose to fire, explosion or other hazard. Only use the battery for the system for which it is specified. Use of an unqualified battery or charger may present a risk of fire, explosion, leakage or other hazard. Do not short-circuit a battery or allow metallic conductive objects to come into contact with battery terminals. Avoid dropping the device or battery. If the device or battery is dropped, especially on a hard surface, and the user suspects damage, do not attempt repair. Contact Ring Customer Service for assistance.
Product Specifications
- Model Number: 5B28S8
- Electrical Rating: 5.0V DC 1A
- Adaptor Model: DSA-5PF19-05 050100
- Adaptor made by: Dee Van Enterprise Co., Ltd.
- Temperature Rating: 0°C - 40°C
Compliance Information
EU Conformity
Ring LLC declares that the radio equipment Ring Keypad (5B28S8) is in compliance with Directive 2014/53/EU. The full text of the EU Declarations of Conformity are available at the following internet address: ring.com/doc.pdf.
Radio Frequency Compliance
In order to protect human health, this device meets the thresholds for exposure of the general public to electromagnetic fields according to Council Recommendation 1999/519/EC. This device should be installed and operated with at least 20 cm between the radiator and your body.
- Wireless Features: Z-Wave
- Maximum Equivalent Isotropically Radiated Power: 868.40 - 869.85 MHz 3.46 dBm EIRP
Recycling Your Device Properly
In some areas, the disposal of certain electronic devices is regulated. Make sure you dispose of, or recycle, your device in accordance with your local laws and regulations.
Additional Resources
- Find online manuals at: ring.com/alarm-manual
- Find warranty information at: ring.com/warranty
- For Z-Wave technical information, visit: ring.com/z-wave
- For support, visit: ring.com/help
Customer Support:
- UK: +44 1727 26 3045
- EU: +800 8700 9781
Welcome to Ring Help!
