Victrola VTA-280B Austin 4-in-1 Turntable

Important Safety Instructions

CAUTION: To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture.

WARNING: To prevent electric shock, do not use this (polarized) plug with an extension cord, receptacle or other outlet unless the blades can be fully inserted to prevent blade exposure.

Safety Symbols Explained:

• ⚡️ [High Voltage Warning]: A lightning flash symbol within an equilateral triangle indicates the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock.
• ❗ [Important Information]: An exclamation point within an equilateral triangle alerts the user to the presence of important operating and maintenance instructions.

1. Read these instructions – All the safety and operating instructions should be read before this product is operated.
2. Keep these instructions – The safety and operating instructions should be retained for future reference.
3. Heed all warnings – All warnings on the appliance and in the operating instructions should be adhered to.
4. Follow all instructions – All operating and use instructions should be followed.
5. Do not use this apparatus near water – The appliance should not be used near water or moisture, for example, in a wet basement or near a swimming pool, and the like.
6. Clean only with dry cloth.
7. Do not block any ventilation openings. Install in accordance with the manufacturer's instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding plug. A polarized plug has two blades with one wider than the other. A grounding plug has two blades and a third grounding prong. The wide blade or the third prong is provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched particularly at the plugs, convenience receptacles, and at the point where they exit from the apparatus.
11. Only use attachments/accessories specified by the manufacturer.
12. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart or rack is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.
13. Unplug the apparatus during lightning storms or when unused for long periods of time.
14. Refer all servicing to qualified personnel. Servicing is required when the apparatus has been damaged in any way, such as power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, has been exposed to rain or moisture, does not operate normally, or has been dropped.
15. This equipment is a Class II or double insulated electrical appliance. It has been designed in such a way that it does not require a safety connection to electrical earth.
16. The mains plug is used as a disconnect device; the disconnect device shall remain readily operable.
17. WARNING: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall not be placed on apparatus.
18. The use of the equipment in moderate climate.
19. The ventilation should not be impeded by covering the ventilation openings with items such as newspapers, tablecloths, curtains, etc.
20. No naked flame sources, such as lighted candles, should be placed on the apparatus.
21. The symbol indicating AC voltage.
22. CAUTION: These servicing instructions are for use by qualified service personnel only. To reduce the risk of electric shock, do not perform any servicing other than that contained in the operating instructions unless you are qualified to do so.

Accessories Included:

• RCA LINE OUT CABLE
• INSTRUCTION MANUAL
• WARRANTY (BACK OF MANUAL)
• 45 RPM ADAPTER
• TURNTABLE OPERATION SHEET

Product Overview

Front View

The front panel features the following controls and indicators:

• 1. POWER/VOLUME: A rotary knob to turn the unit ON (clockwise) or OFF (counter-clockwise). When the unit is ON, rotating the knob adjusts the volume.
• 2. 3.5mm AUX-IN JACK: A 3.5mm jack for connecting external audio sources.
• 3. FM: A button to switch to the FM radio function.
• 4. BT: A button to switch to the Bluetooth function.
• 5. AUX: A button to switch to the AUX-IN function.
• 6. PHONO: A button to switch to the PHONO (turntable) function.
• 7. RADIO TUNER KNOB: A dial used to tune to desired FM stations.
• 8. SPEAKER: Integrated speaker for audio output.

Rear View

The rear panel includes the following connections:

• 9. LINE OUT jacks: RCA output jacks (white and red) for connecting to an external amplifier or audio system.
• 10. FM wire antenna: A wire antenna to improve FM radio reception. Extend and reposition for best results.
• 11. AC Power Cord: Connects the unit to a wall outlet for power.

Parts of the Turntable

Key components of the turntable mechanism include:

• A. Turntable: The rotating platter where vinyl records are placed.
• B. Safety Screw (for transport): A screw used to secure the turntable platter during shipping. It should be turned clockwise with a coin or screwdriver before use and counterclockwise to secure the turntable when transporting the unit.
• C. Speed Selector: Allows selection of playback speeds: 33-1/3 RPM, 45 RPM, and 78 RPM.
• D. Tone Arm holder: A rest to secure the tone arm when not in use.
• E. Tone Arm: The arm that holds the stylus and tracks the record groove. Before use, loosen the twist tie securing the tone arm.
• F. Stylus: The needle that contacts the record groove to produce sound.
• G. 45 RPM adaptor: An adapter for playing 7-inch vinyl records with a large center hole.
• H. Cue-lever: A lever used to manually lift and lower the tone arm onto the record.

Setup / Basic Operation

Setup

1. Remove the white protective needle cover by gently pulling it towards the front of the unit.
2. Remove any packaging materials from the unit.
3. Connect the AC power cord to a wall outlet.

Note: It is strongly recommended that this product be operated only from the type of power source indicated on the marking label. To prevent interference, avoid bundling audio signal cables together with the AC power cord.

Basic Operation

1. Rotate the POWER/VOLUME knob clockwise to turn the unit on. The LED display will illuminate.
2. Select the desired source by pressing the corresponding button (FM, BT, AUX, or PHONO).
3. Rotate the POWER/VOLUME knob to adjust the sound level to your preference.

Listening through RCA LINE OUT

For listening via an external amplifier device:

1. First, reduce the volume level to minimum.
2. Insert the white and red plugs of the RCA cable into the corresponding colored jacks on the unit (white to white, red to red).
3. Then, insert the opposite end of the RCA cable into the amplifier device.

Condensation Warning

When the unit is moved from a cold or warm place, or is used following a sudden temperature change, there is a risk of condensation forming on the unit, which can prevent proper operation. In such cases, leave the unit plugged into an AC outlet for 1-2 hours to allow it to stabilize at the temperature of its surroundings.

Listening Modes

Listening to the FM Radio

1. Press the FM button to switch to the FM function. The FM button will light up.
2. Use the Radio Tuner Knob to tune to the desired station.

Listening to an External Audio Device (BT Mode)

In Bluetooth (BT) mode, this unit can play music from an external device equipped with Bluetooth.

Getting Connected Using Bluetooth:

1. Press the BT button to switch to the Bluetooth function. The Bluetooth button LED will flash.
2. Ensure your external device's Bluetooth function is enabled.
3. Search for Bluetooth devices on your external device.
4. When "VTA-280B" appears on the paired devices list on your external device, select it to connect. If a password is required, enter "0000" and press "OK" on your external device.
5. Once your Bluetooth connection is successful, the Bluetooth button LED will remain lit.

Note: The effective distance between your external device and this apparatus is approximately 33 feet (10 meters). All operations are controlled by your external device.

Listening to an External Audio Device (AUX Mode)

Press the AUX button to switch to the AUX-IN function. The AUX button will light up. In AUX (auxiliary) mode, this unit can play audio from an external audio source such as an iPod, MP3 Player, or Portable CD Player.

The unit has a front AUX-IN jack. When connecting a device with a headphone jack, use a cable with 3.5mm plugs on both ends, connecting to the front AUX-IN jack.

1. Plug one end of the AUX-IN cable (not included) into the AUX-IN jack on the unit.
2. Plug the other end of the cable into the headphone jack of the external audio source.

Note: All operations are controlled by your external device.

Listening to a Vinyl Record

1. Press the PHONO button to switch to the PHONO function. The PHONO button will light up.
2. Gently open the top cover. Note: Be careful not to pinch your finger when opening/closing the top cover.
3. Place a vinyl record on the turntable. For 45 RPM records, use the included adaptor.
4. Select the appropriate speed (33-1/3, 45, or 78 RPM).
5. Remove the tone arm-rest holder to release the tone arm.
6. Gently move the tone arm to the edge of the record or the starting point of a track. The turntable will begin to turn.
7. When the record reaches the end, the tone arm will stop at the center. Lift and return the tone arm to the tone arm rest manually. Lock the tone arm-rest holder to protect the tone arm.

Important:

• Closing the top cover helps prevent dust from settling on the turntable.
• Always relock the tone arm clip before transporting the unit.
• Do not place anything on top of the turntable cover, especially while playing a record.

Maintenance / Proper Handling

Handling Vinyl Records

• Do not touch the record's grooves. Handle records only by the edges or the label with clean hands. Touching the record surface can deteriorate its quality.
• To clean a record, use a soft anti-static cloth to gently wipe the record surface.
• Keep records in their protective sleeves when not in use.
• Always store records upright on their edges.
• Avoid placing records in direct sunlight, close to heat sources (radiators, stoves, etc.), or in locations subject to vibration, excessive dust, heat, cold, or moisture.

General Care

• When removing the power plug from the wall outlet, always pull directly on the plug, never pull the cord.
• To keep the laser pickup clean, do not touch it, and ensure the disc tray is closed.
• Do not attempt to clean the unit with chemical solvents, as this might damage the finish. For cleaning, use only a clean, dry cloth.
• To shut off the power completely, unplug the power cord from the wall outlet. Unplug the unit if it will not be used for an extended period of time.

How to Replace the Turntable Stylus (Replacement Needle # ITNP-LC1)

The stylus should last approximately 50 hours under normal use. It is recommended to replace the stylus as soon as a change in sound quality is noticed. Prolonged use of a worn-out stylus may damage records. Playing 78 RPM records will wear out the stylus more quickly.

Removing the old stylus:

1. Set a screwdriver at the tip of the stylus and push downward (refer to diagram point A).
2. Remove the stylus by pulling it simultaneously downward and forward.

Installing a new stylus:

1. Hold the front tip of the stylus and insert its rear edge first (refer to diagram point B).
2. Push the stylus upwards (refer to diagram point C) until the tip locks into place.

Caution:

• Do not bend the stylus.
• Do not touch the needle to avoid injury to your hand.
• Turn off the unit's power before replacing the stylus.
• Keep out of reach of children.

Specifications

Troubleshooting Guide

Regulatory Information

FCC Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

WARNING: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment.

The device must not be co-located or operating in conjunction with any other antenna or transmitter.

To maintain compliance with the FCC's RF exposure guidelines, place the product at least 20cm from nearby persons.

IC Statement

This device complies with RSS247 of Industry Canada. Cet appareil se conforme à RSS247 de Canada d'Industrie. This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. appareils radio exempts de licence. Son fonctionnement est sujet aux deux conditions suivantes: (1) le dispositif ne doit pas produire de brouillage préjudiciable, et (2) ce dispositif doit accepter tout brouillage reçu, y compris un brouillage susceptible de provoquer un fonctionnement indésirable.

The device must not be co-located or operating in conjunction with any other antenna or transmitter. L'appareil ne doit pas être localisé ou fonctionner avec d'autres antennes ou transmetteurs.

This device complies with IC radiation exposure limits set forth for an uncontrolled environment. Cet appareil est conforme aux limites d'exposition aux rayonnements de la IC établies pour un incontrôlé environnement.

The device should be installed and operated with a minimum distance of 20cm between the radiator and your body. L'appareil doit être installé et utilisé avec une distance minimale de 20 cm entre le radiate et votre corps.

California PROP 65 Warning

WARNING: This product can expose you to chemicals including lead which is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov.

Warranty Information

Victrola is a registered trademark of Innovative Technology Electronics LLC.

Innovative Technology Electronics LLC.

Limited Warranty: 90 Days Labor, One Year Parts

Innovative Technology Electronics LLC. (IT) warrants the product to be free from "Defects" in materials under normal use for a period of "One Year" from the date of the original purchase. The Warranty is "Not" transferable. IT agrees, within the initial "90 Day" period, to repair or replace the product if it is determined to be defective at "No Charge". It is further agreed that IT will cover the cost to repair or replace damaged "Parts" only for a total period of "One Year" from the date of the original purchase. The warranty does not cover cosmetic damage, antennas, AC cords, cabinets, headbands, ear-pads, or damage due to line power surges, connection to improper voltage supply or settings, misuse, mishandling, accident, acts of God or attempted repair by an unauthorized service agent.

To obtain service: The purchaser MUST present an original sales receipt / proof of purchase. Please contact us at www.victrola.com to request an RMA (Return Material Authorization) number to return products for service or replacement. Returns without an RMA number on the package will be refused and returned to sender. Upon receipt of the returning item and our full inspection, IT may issue a replacement to the customer for the same item or one that has equivalent value and features. To return an item, supply full name, return address, phone number, item purchased, receipt of purchase, and reason for return to obtain an RMA number. All returns must be in the original packaging or a reasonable substitute to prevent damage. Customer "Must" include full name, shipping address, and telephone number inside of the package. No return will be shipped back to a PO Box or APO address. Please include your check or money order in the amount of:

• USD $5.00 for items $10.00 to $39.99 (Price Paid Per Unit)
• USD $10.00 for items $40.00 to $99.99 (Price Paid Per Unit)
• USD $16.00 for items $100.00 and up (Price Paid Per Unit)
• Shipping fees are non-refundable.

Payments are to be made to Innovative Technology Electronics LLC. (for handling and return shipping charges). IT will not be responsible for delays or unprocessed claims resulting from a purchaser's failure to provide any/all of the necessary information.

Send all inquiries or RMA requests via our website: www.victrola.com/pages/technical-support.

Innovative Technology Electronics LLC.
1 Channel Drive
Port Washington, NY 11050
Toll free: 1-877-483-2497
Website for support: www.victrola.com/pages/technical-support

There are no express warranties except as listed above. REPAIR OR REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS THE EXCLUSIVE REMEDY OF THE CUSTOMER. (IT) SHALL NOT BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR BREACH OF ANY EXPRESS OR IMPLIED WARRANTY ON THIS PRODUCT EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE LAW. ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ON THIS PRODUCT IS LIMITED IN DURATION TO THE DURATION OF THIS WARRANTY. Some states do not allow the exclusion or limitation of incidental or consequential damages, or limitations on how long an implied warranty lasts, so the above exclusions or limitations may not apply to you. This warranty gives you specific legal rights and you may also have other rights, which vary from state to state.