Victrola VTA-270B 6-in-1 Turntable

Important Safety Instructions

⚠️ CAUTION: To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture.

⚠️ WARNING: To prevent electric shock, do not use this (polarized) plug with an extension cord, receptacle or other outlet unless the blades can be fully inserted to prevent blade exposure.

⚠️ WARNING: Invisible laser radiation when open and interlock failed or defeated. Avoid direct exposure to laser beam.

1. Read these instructions – All the safety and operating instructions should be read before this product is operated.
2. Keep these instructions – The safety and operating instructions should be retained for future reference.
3. Heed all warnings – All warnings on the appliance and in the operating instructions should be adhered to.
4. Follow all instructions – All operating and use instructions should be followed.
5. Do not use this apparatus near water – The appliance should not be used near water or moisture – for example, in a wet basement or near a swimming pool, and the like.
6. Clean only with dry cloth.
7. Do not block any ventilation openings. Install in accordance with the manufacturer's instructions.
8. Do not install near any heat sources such as radiations, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding plug. A polarized plug has two blades with one wider than the other. A grounding plug has two blades and a third grounding prong. The wide blade or the third prong is provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched particularly at the plugs, convenience receptacles, and at the point where they exit from the apparatus.
11. Only use attachments/accessories specified by the manufacturer.
12. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart or rack is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.
13. Unplug the apparatus during lighting storms or when unused for long periods of time.
14. Refer all servicing to qualified personnel. Servicing is required when the apparatus has been damaged in any way, such as power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

Safety Symbols:

• The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of non-insulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock.
• The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance instructions in the literature accompanying the appliance.

This equipment is a Class II or double insulated electrical appliance. It has been designed in such a way that it does not require a safety connection to electrical earth.

The mains plug is used as a disconnect device; the disconnect device shall remain readily operable.

WARNING: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall not be placed on apparatus.

The use of the equipment in moderate climate.

The ventilation should not be impeded by covering the ventilation openings with items such as newspapers, tablecloths, curtains, etc.

No naked flame sources, such as lighted candles, should be placed on the apparatus.

The symbol with ⚡ indicates AC voltage.

CAUTION: These servicing instructions are for use by qualified service personnel only. To reduce the risk of electric shock, do not perform any servicing other than that contained in the operating instructions unless you are qualified to do so.

Accessories Included:

• RCA LINE OUT CABLE
• INSTRUCTION MANUAL
• WARRANTY (BACK OF MANUAL)
• 45 RPM ADAPTER
• TURNTABLE OPERATION SHEET

Product Overview

Front View

The front of the Victrola VTA-270B features various controls and components:

• 1. POWER: ⏻ Toggle button to turn the unit on or off.
• 2. 3.5mm AUX IN JACK: Connect your external audio source here.
• 3. 3.5mm HEADPHONE JACK: Connect headphones ? for private listening.
• 4. STEREO SPEAKERS: Integrated speakers for audio output.
• 5. DISC TRAY: ? Compartment for CDs.
• 6. PLAY/PAUSE: ▶️/⏸️ Button to start or pause playback (works in CD & Bluetooth modes).
• 7. OPEN/CLOSE: ?️ Button to open and close the CD tray (works in CD mode).
• 8. STOP: ⏹️ Button to stop playback or cancel program setting (in CD mode).
• 9. PAIR: Button to pair a new Bluetooth device. Pressing again disconnects the current device.
• 10. PREVIOUS TRACK: ⏪ Button to return to the beginning of the current track or the previous track (CD & Bluetooth). Hold to rewind (CD mode).
• 11. NEXT: ⏩ Button to skip the current track (CD & Bluetooth). Hold to rewind (CD mode).
• 12. REPEAT: Button to select repeat or shuffle mode.
• 13. PROG: Button to set programmed playback.
• 14. RADIO TUNER KNOB: ? Knob to tune FM radio stations.
• 15. LED DISPLAY: Shows current mode and track information.
• 16. VOLUME KNOB: Knob to adjust audio volume.
• 17. SELECTION KNOB: Rotate to select desired function (FM, CD, BT, AUX, PHONO, TAPE).

Left Side View

The left side features the cassette mechanism:

• 18. CASSETTE FF & EJECT: Button to fast forward (press halfway) or eject the tape (press fully).

Rear View

The rear panel provides audio output and power connections:

• LINE OUT jacks: RCA jacks (white and red) for connecting to an amplifier. Connect the white plug to the white jack and the red plug to the red jack.
• 20. AC Power Cord: Connects the unit to a wall outlet. It is recommended to use only the type of power source indicated on the marking label.

Parts of the Turntable

The turntable component includes:

• A. Turntable: The main platter where records are placed.
• B. Safety Screw: ⚙️ Used for securing the turntable during transport. Turn clockwise before use, counterclockwise for transport.
• C. Speed Selector: Choose between 33-1/3, 45, and 78 RPM speeds for different record types.
• D. Tone Arm holder: Secures the tone arm when not in use.
• E. Tone Arm: Holds the stylus and tracks the record groove. Loosen the twist tie before use.
• F. Stylus: The needle that reads the record.
• G. 45 RPM adaptor: Used for playing 45 RPM records.
• H. Cue-lever: Lever to lift and lower the tone arm onto the record.

Setup / Basic Operation

Setup

1. Remove the white protective needle cover by gently pulling towards the front of the unit.
2. Remove any packaging materials from the unit.
3. Connect the AC power cord to a wall outlet.

Note: It is strongly recommended that this product should be operated only from the type of power source indicated on the marking label. To prevent interference, avoid bundling audio signal cables together with the AC power cord.

Basic Operation

1. Move the POWER toggle ⏻ to the ON position. The LED light around the radio dial will illuminate.
2. Select a play mode by rotating the function knob (FM, CD, BT, AUX, PHONO, TAPE).
3. Rotate the VOLUME knob to adjust the desired level of sound.

Listening through RCA LINE OUT

For listening via an amplifier:

1. First, reduce the volume level to minimum.
2. Insert the white and red plugs of the RCA cable into the unit's LINE OUT jacks on the back.
3. Insert the opposite end into your amplifier device, ensuring the white plug connects to the white jack and the red plug to the red jack.

Listening through Earphones/Headphones (not included)

For private listening:

1. First, reduce the volume level to minimum.
2. Insert your headphones' plug into the 3.5mm headphone jack ?.
3. Adjust the volume up by turning the VOLUME knob.

Note: The built-in speakers will automatically be deactivated when headphones are plugged in.

CONDENSATION WARNING: When the unit is moved from a cold or warm place, or is used following a sudden temperature change, condensation may form on the unit, preventing proper operation. In such cases, leave the unit plugged into an AC outlet for 1-2 hours to allow it to stabilize at the ambient temperature.

Listening to the FM Radio

1. Rotate the Function Knob to select “FM”. The LED Display will show “rad”.
2. Tune to the desired station using the Radio Tuner Knob ?.

Listening to a CD

1. Rotate the Function Knob to select CD. The LED Display will show "Cd--". (If no disc is present, it will show "disc".)
2. Press the OPEN/CLOSE ?️ button to open the disc tray. (This button only works in CD mode.)
3. Place a disc on the tray with the printed label face up.
4. Press the OPEN/CLOSE ?️ button to close the tray.
5. After the disc is loaded, the number of tracks will appear on the display, and playback will begin automatically from the first track.
6. To temporarily pause playback, press the PLAY/PAUSE ▶️/⏸️ button. Press again to resume.
7. To return to the previous track or skip to the next, press the corresponding ⏪ or ⏩ button. Pressing ⏪ once restarts the current track. Pressing it twice in succession returns to the beginning of the previous track.
8. To Fast Forward or Rewind within a track, press and hold the corresponding ⏪ or ⏩ button until the desired position is reached.
9. To stop playback, press the STOP ⏹️ button.

Important:

• Never place more than one disc on the tray.
• The disc must be placed in the center of the disc tray. Incorrectly loaded discs can permanently damage the tray door mechanism.
• Do not push the CD tray; always use the OPEN/CLOSE button.
• It takes a moment for the unit to load a disc, during which all buttons will be temporarily deactivated.

Repeat Playback

Pressing the REPEAT button cycles through the following modes:

• REPEAT ONE: The "REPEAT ONE" icon appears, and the current track plays repeatedly. You can select another track using ⏪ or ⏩.
• REPEAT ALL: The "REPEAT ALL" icon appears, and the entire CD plays repeatedly.
• SHUFFLE: The "SHUFFLE" icon appears, and tracks play in a random sequence.

Notes:

• Repeat playback works with CD discs only.
• Pressing ⏩ during shuffle playback randomly selects the next track.
• A track cannot be repeated during shuffle playback.
• Shuffle playback does not work during programmed playback.

To cancel REPEAT or SHUFFLE mode, press the REPEAT button repeatedly until the icon disappears.

Programmed Playback

Up to 20 tracks can be programmed in a desired order.

Notes: Programmed playback works with CD discs only.

1. Select "CD" mode, then load a CD.
2. While the CD is stopped, press the PROGRAM button. The "PROG" indicator lights up and "P01" blinks.
3. Press ⏪ or ⏩ to select a track number.
4. Press the PROGRAM button again to set the next track; "P02" appears and blinks. Repeat steps 4-5 to program additional tracks.
5. When track selection is finished, press the PLAY ▶️ button to start program playback. (If all 20 tracks are programmed, "FI" will appear.)
6. Press the STOP ⏹️ button twice to cancel program mode; "PROG" will disappear.

To check the programmed order, in stop mode, press ⏪ or ⏩ repeatedly.

To add a track to the end of the programmed order: In stop mode, press the PROGRAM button, select a track number using ⏪ or ⏩, then press PROGRAM again. The current track will be added.

Listening to an External Audio Device (BT Mode)

This unit can play music from external devices with Bluetooth functionality.

Getting Connected Using Bluetooth

1. Rotate the Function Knob to select “BT”. The LED Display will show “bt”.
2. The “BT” LED Display will flash while searching for a device.
3. On your external device, turn ON the Bluetooth function.

NOTE: The effective distance between your external device and this apparatus is 10 meters (33ft).

4. Wait for “VTA-270B” to appear on your device's list. Select it to connect. If prompted, enter "0000" as the password.
5. Once connected, the "BT" indicator will remain lit.
6. You can use the BACK or NEXT buttons to skip tracks or control playback on your device.

NOTE: The PAIR button allows you to disconnect from your external device while remaining in BT mode. Simply press PAIR to disconnect and search for a new device. Fast Forward / Rewind functions are only available on your external device.

Listening to an External Audio Device (AUX Mode)

In AUX (auxiliary) mode, this unit can play audio from an external device (iPod, MP3 Player, Portable CD Player, etc.).

1. Rotate the Function Knob to select “AUX”. The LED Display will show “AUX”.
2. Connect a 3.5mm cable (not included) from the AUX IN jack on the front of the unit to the headphone jack of your external device.

NOTE: All operations are controlled by your external device.

Listening to a Vinyl Record

1. Rotate the Function Knob to select “PHONO”. The LED Display will show “PHON”.
2. Gently open the top cover. Be careful not to pinch your finger.
3. Place a vinyl record on the turntable. Use the included 45 RPM adaptor for 45 RPM records.
4. Select the appropriate speed (33, 45, or 78 RPM).
5. Remove the tone arm rest holder to release the tone arm.
6. Gently raise the tone arm using the tone arm lever. Move the tone arm to the edge of the record (or the starting point of a track) and lower the arm onto the record using the tone arm lever. The turntable will begin to turn.
7. When the record reaches its end, the tone arm will stop at the center. Lift and return the tone arm to the tone arm rest manually. Lock the tone arm in the rest holder.

Important:

• Closing the top cover helps prevent dust from settling on the turntable.
• Always relock the tone arm clip before transporting the unit.
• Do not place anything on top of the turntable cover, especially while playing a record.

Listening to a Cassette Tape

1. Rotate the Function Knob to select “TAPE”. The LED Display will show “TAPE”. Load an audio cassette tape into the unit (located on the left side). Playback will begin automatically.
2. Press the button halfway to Fast Forward the tape. Press lightly to resume playback.
3. Press the button completely down to end playback and eject the tape.

Maintenance / Proper Handling

Compact Disc Handling

• Always place the disc on the disc tray with the label side facing upward.
• To remove a disc from its storage case, press down on the center and lift the disc upward by its edges.
• To clean a disc, wipe the surface from the center hole outward with a soft, dry cloth.
• Never use chemicals like record spray, antistatic sprays, fluid, benzine, or thinner, as they can damage the disc's plastic surface.
• Return discs to their cases after use to protect from dust and scratches.
• Do not expose discs to direct sunlight, high humidity, or high temperatures for extended periods.
• Printable CD-R and CD-RW discs are not recommended, as the label side may become sticky and damage the unit.
• Use a soft oil-based felt-tipped pen to write information on the label side. Never use a ball-point or hard-tipped pen.
• Do not use irregularly-shaped CDs (octagonal, heart-shaped, business card size, etc), as they will damage the unit.
• Read all precautions supplied with any CD-R or CD-RW disc.
• Never handle a disc with dirty fingers.
• Never insert a disc that has a crack on the surface.

Handling Vinyl Records

• Do not touch the record's grooves. Handle records by the edges or label with clean hands. Touching the surface degrades quality.
• To clean a record, use a soft anti-static cloth to gently wipe the surface.
• Keep records in their protective sleeves when not in use.
• Always store records upright on their edges.
• Avoid placing records in direct sunlight, near heat sources (radiators, stoves), or in locations subject to vibration, excessive dust, heat, cold, or moisture.

General Care

• When removing the power plug from the wall outlet, always pull directly on the plug, never the cord.
• To keep the laser pickup clean, do not touch it and ensure the disc tray is closed.
• Do not attempt to clean the unit with chemical solvents, as this might damage the finish. Use only a clean, dry cloth for cleaning.
• To shut off the power completely, unplug the power cord from the wall outlet. Unplug the unit if it will not be used for an extended period.

How to Replace the Turntable Stylus (Replacement Needle # ITNP-LC1)

The stylus should last about 50 hours under normal use. Replace it when you notice a change in sound quality, as prolonged use of a worn-out stylus can damage records. The highest speed (78 RPM) wears out the stylus more quickly.

Removing the old stylus:

1. Set a screwdriver at the tip of the stylus and push downward (A).
2. Remove the stylus by pulling it simultaneously downward and forward.

Installing a new stylus:

1. Hold the front tip of the stylus and insert its rear edge (B) first.
2. Push the stylus upwards (C) until the tip locks into place.

Caution:

• Do not bend the stylus.
• Do not touch the needle to avoid injury.
• Turn off the unit's power before replacing the stylus.
• Keep out of reach of children.

Specifications

Troubleshooting Guide

For further assistance with your product, call Innovative Technology at TOLL FREE# 1-877-ITECH-97 (1-877-483-2497).

Please note: As a result of continual improvements, the design and specifications of this product are subject to change without notice.

Bluetooth is a registered trademark of Bluetooth SIG, Inc. Other trademarks and trade names are those of their respective owners.

Made in China.

FCC Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

WARNING: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment.

The device must not be co-located or operating in conjunction with any other antenna or transmitter.

To maintain compliance with the FCC's RF exposure guidelines, place the product at least 20cm from nearby persons.

IC Statement

This device complies with RSS247 of Industry Canada. Cet appareil se conforme à RSS247 de Canada d'Industrie. This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. appareils radio exempts de licence. Son fonctionnement est sujet aux deux conditions suivantes: (1) le dispositif ne doit pas produire de brouillage prejudiciable, et (2) ce dispositif doit accepter tout brouillage reçu, y compris un brouillage susceptible de provoquer un fonctionnement indesirable.

The device must not be co-located or operating in conjunction with any other antenna or transmitter. L'appareil ne doit pas être localisé ou fonctionner avec d'autres antennes ou transmetteurs.

This device complies with IC radiation exposure limits set forth for an uncontrolled environment. Cet appareil est conforme aux limites d'exposition aux rayonnements de la IC établies pour un incontrôlé environnement.

The device should be installed and operated with a minimum distance of 20cm between the radiator and your body. L'appareil doit être installé et utilisé avec une distance minimale de 20 cm entre le radiate et votre corps.

California PROP 65 Warning

⚠️ WARNING: This product can expose you to chemicals including lead which is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov.

Warranty

Victrola is a registered trademark of Innovative Technology Electronics LLC.

Innovative Technology Electronics LLC.

Limited Warranty: 90 Days Labor, One Year Parts

Innovative Technology Electronics LLC. (IT) warrants the product to be free from “Defects” in materials under normal use for a period of “One Year” from the date of the original purchase. The Warranty is "Not” transferable. IT agrees, within the initial “90 Day” period, to repair or replace the product if it is determined to be defective at "No Charge”. It is further agreed that IT will cover the cost to repair or replace damaged “Parts” only for a total period of “One Year" from the date of the original purchase.

The warranty does not cover cosmetic damage, antennas, AC cords, cabinets, headbands, ear-pads, or damage due to line power surges, connection to improper voltage supply or settings, misuse, mishandling, accident, acts of God or attempted repair by an unauthorized service agent.

To obtain service: The purchaser MUST present an original sales receipt / proof of purchase. Please contact us at www.victrola.com to request an RMA (Return Material Authorization) number to return products for service or replacement. Returns without an RMA number on the package will be refused and returned to sender. Upon receipt of the returning item and our full inspection, IT may issue a replacement to the customer for the same item or one that has equivalent value and features. To return an item, supply full name, return address, phone number, item purchased, receipt of purchase, and reason for return to obtain an RMA number. All returns must be in the original packaging or a reasonable substitute to prevent damage. Customer “Must” include full name, shipping address, and telephone number inside of the package. No return will be shipped back to a PO Box or APO address.

Please include your check or money order in the amount of:

• USD$5.00 for items $10.00 to $39.99 (Price Paid Per Unit)
• USD$10.00 for items $40.00 to $99.99 (Price Paid Per Unit)
• USD $16.00 for items $100.00 and up (Price Paid Per Unit)
• Shipping fees are non-refundable

These amounts are to be payable to Innovative Technology Electronics LLC. (for handling and return shipping charges). IT will not be responsible for delays or unprocessed claims resulting from a purchaser's failure to provide any/all of the necessary information.

Send all inquiries or RMA requests via our website www.victrola.com/pages/technical-support.

Innovative Technology Electronics LLC.
1 Channel Drive
Port Washington, NY 11050
Toll free: 1-877-483-2497
Website for support: www.victrola.com/pages/technical-support

There are no express warranties except as listed above.

REPAIR OR REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS THE EXCLUSIVE REMEDY OF THE CUSTOMER. (IT) SHALL NOT BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR BREACH OF ANY EXPRESS OR IMPLIED WARRANTY ON THIS PRODUCT EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE LAW. ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ON THIS PRODUCT IS LIMITED IN DURATION TO THE DURATION OF THIS WARRANTY.

Some states do not allow the exclusion or limitation of incidental or consequential damages, or limitations on how long an implied warranty lasts, so the above exclusions or limitations may not apply to you. This warranty gives you specific legal rights and you may also have other rights, which vary from state to state.