Vivitar Wireless Speaker

Specifications

• Bluetooth Range: Up to 33 feet (10 meters)
• Battery Type: Polymer Lithium Ion Battery
• Charging Input: DC 5V = 500 mA
• Play Time: Approximately 3-5 hours**
• Charging Time: Approximately 1-2 hours

**Applicable at 50% of maximum volume. Results will be lower when volume is higher.

A Quick Look

Diagram showing the speaker with labels for Power, Charging port, and USB. The charging cable has a Micro USB plug and a standard USB plug.

Charging

1. The included USB charging cable has a Micro USB plug and a standard USB plug.
2. Insert the cable's standard USB plug into the USB port of a computer or suitable USB charging adapter. Then insert the cable's Micro USB end into the speaker's charging port. The light will be red while charging and turn off when fully charged.

Bluetooth Pairing

1. Press and hold the Power button for 2-3 seconds to turn on the speaker. A voice prompt will indicate the speaker is on.
2. Go to the Bluetooth settings menu on your phone. Make sure that Bluetooth is turned on. Connect to the device listed as "Wireless Speaker." The speaker will indicate when it is connected.

Other Functions

TWS (True Wireless Stereo) Pairing

1. Turn on two speakers. Do not perform Bluetooth pairing first.
2. Short press the power button twice on one speaker to initiate TWS pairing.
3. Wait for a voice prompt indicating successful TWS pairing.
4. Now, perform Bluetooth pairing with your device.
5. To end TWS pairing: first, disconnect Bluetooth pairing, then short press the power button twice on one speaker to end TWS pairing.

Vivitar One Year Warranty

This warranty covers the original consumer purchaser only and is not transferable. Vivitar warrants this product to function properly under normal usage, due to defects in material or workmanship, for a period of one year. The product will be repaired or replaced at no charge for parts or labor.

What Is Not Covered by Warranty: Damages or malfunctions not resulting from defects in material or workmanship, including but not limited to, repair by unauthorized parties, tampering, modification, or accident.

To Obtain Warranty Service and Troubleshooting Information: Call 1-800-592-9541 or visit www.vivitar.com.

To receive warranty service, the original consumer purchaser must contact Vivitar for problem determination and service procedures. Proof of purchase (bill of sale or receipted invoice) must be presented. Package and send the defective product with a dated proof of purchase, a written explanation of the problem, and a valid return address at your expense. Do not include any other items or accessories. Products not covered by warranty will be returned unrepaired.

©2023 Sakar International
195 Carter Drive
Edison, NJ 08817
Support: 800 592 9541
www.vivitar.com

Important Safety Precautions

1. READ ALL INSTRUCTIONS BEFORE USING YOUR SPEAKER.
2. Do not allow children to use the speaker without proper adult supervision.
3. Do not expose your speaker to excessive heat or fire.
4. Always press the buttons carefully.
5. Do not use in extremely dry environments as this can lead to static discharge during usage.
6. Do not expose your speaker to temperatures above 140°F / 40°C. Keep out of direct sunlight.
7. Do not attempt to repair this product yourself. Contact a qualified service center if your speaker is in need of service.
8. Do not drop, puncture, or expose the speaker to extreme physical force.
9. Your speaker is not intended for commercial use.
10. Do not place the speaker near objects that generate a strong magnetic field.
11. Use only the included charging cable.
12. Unplug this device when not in use for long periods of time and during lightning storms.
13. Do not pull or yank on the power cable. Always remove the cable gently from wall outlets and the speaker's charging port.
14. Use a soft cloth to clean your speaker. Never use rubbing alcohol or other harsh chemicals.
15. Please recycle or dispose of your speaker properly based on the laws and rules of your municipality. Contact local recycling facilities and/or the manufacturer of your speaker for further information.
16. The device has been evaluated to meet general RF exposure requirement.

FCC Statement

Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.