Vivitar PLAY Wireless Speaker
Model: V60101BT
Key Features
- Multicolor LED Lighting
- 5 Watts Output
- Built-in Handle
- Built-in Phone Holder
What's Included
- V60101BT Wireless Speaker
- Type-C Charging Cable
- User's Manual with Warranty Information
A Closer Look
Top Panel Ports & Controls:
- 1. Power ON/OFF: A sliding switch to turn the device on or off.
- 2. TF Card Slot: Slot for inserting a TF (Micro SD) card.
- 3. USB Port: For connecting USB drives to play MP3 files.
- 4. LED Indicator: Shows charging status.
- 5. DC 5V Charging Port: Port for connecting the charging cable.
Bottom Panel Buttons:
- 6. Previous/Volume-: Press the [◀ / Volume-] button to go to the previous track. Press and hold to decrease the volume.
- 7. Next/Volume+: Press the [▶ / Volume+] button to go to the next track. Press and hold to increase the volume.
- 8. Play/Pause/TWS: Press the [Play/Pause] button to play or pause the current track. Press twice for TWS pairing.
- 9. Mode/Light: Press the [Mode/Light] button to cycle through modes (Bluetooth, FM, USB/TF). Press and hold to turn the speaker's LED lights on/off.
Charging the Speaker
- Insert one end of the included Type-C charging cable into the speaker's DC 5V charging port.
- Connect the other end of the USB cable to a USB port on a computer or a suitable USB charging adapter.
- The LED indicator will be ON (typically red) while charging and turn OFF when charging is complete.
Battery Warning:
- The speaker has an integrated lithium-ion battery that cannot be replaced.
- Do not expose the battery to fire or excessive heat.
- Do not crush, puncture, incinerate, or short circuit the battery.
- Please recycle or dispose of the battery properly according to local regulations. Contact your local recycling facilities and/or the manufacturer for further information.
Powering the Speaker On and Off
- To power ON, slide the power switch to the ON position. The speaker will automatically enter Bluetooth pairing mode.
- To power OFF, slide the power switch to the OFF position.
Connecting via Bluetooth
- Ensure the speaker is powered ON.
- Press the Mode button repeatedly until Bluetooth (BT) mode is selected.
- On your smartphone or Bluetooth-enabled device, go to the Bluetooth settings menu.
- Make sure Bluetooth is turned ON.
- Select "V60101BT" from the list of available devices to connect.
Music Playback Controls
- Previous/Volume-: Press the [◀ / Volume-] button to go back to the last track in a playlist. Press and hold to decrease the volume.
- Next/Volume+: Press the [▶ / Volume+] button to go to the next track in a playlist. Press and hold to increase the volume.
- Play/Pause: Press the [Play/Pause] button to play or pause the current track.
Controlling the LED Lights
- Press and hold the [Mode/Light] button to turn the speaker's LED lights ON or OFF.
Additional Features
TWS (True Wireless Stereo) Function
- If you have two V60101BT speakers, you can pair them for stereo sound.
- Power ON both speakers.
- Quickly press the [Play/Pause/TWS] button twice on either one of the speakers.
- The two speakers will pair together.
- Connect your smartphone to the primary speaker via Bluetooth as usual ("V60101BT").
USB Port Usage
- Insert a USB drive containing MP3 files into the [USB Port].
- The speaker will play MP3 files when in USB mode.
- The USB port is for file playback only and cannot be used to charge other devices.
TF Card Port Usage
- Insert a TF (Micro SD) card containing MP3 files into the [TF Card Slot].
- The speaker will play MP3 files when in TF mode.
FM Mode
- When the speaker is in FM mode, quickly press the [Play/Pause] button to search through FM channels.
Safety Precautions
- Always read all instructions before using the speaker.
- Do not expose the speaker to high temperatures, extreme cold, high humidity, or moisture/water.
- Never attempt to open or repair the speaker yourself; contact certified professionals.
- The speaker is not intended for use by unsupervised children or infirm individuals.
- Handle all buttons carefully; do not manhandle the speaker.
- Operating temperature range: 32°F (0°C) to 104°F (40°C).
- Do not drop, throw, or subject the speaker to strong impacts or physical trauma.
- If you notice any abnormalities (e.g., smoke, fire), discontinue use and contact the manufacturer.
- Unplug the speaker when not in use for extended periods.
- Do not place the speaker on flammable materials (e.g., rugs, bedding) when plugged in.
- Recycle or dispose of the speaker and its battery properly according to local laws and regulations.
- Clean the speaker with a soft cloth or paper towel. Avoid harsh chemicals and never submerge the speaker in water.
Maintenance and Care
- Use a soft cloth or paper towel for cleaning. Avoid harsh chemicals or detergents. Ensure the speaker is dry before charging.
- Store the speaker in a cool, dry place when not in use.
- Connect and disconnect cables carefully, avoiding tugging or yanking.
- Avoid exposing the speaker to extreme temperatures.
- Dispose of the speaker according to local municipality laws and contact local recycling facilities or the manufacturer for guidance.
Specifications
- Bluetooth Version: V5.0
- Bluetooth Range: Up to 33 feet (10 meters)
- Power Supply: DC 5V, 1A (USB)
- Battery Type: 3.7V 1200mAh Lithium Ion Battery
- Play Time (For Music): 2-3 hours*
- Lighting Run Time: Up to 3 hours*
- Music and Lighting Run Time: Up to 2 hours*
- *Note: Playback times are approximate and may vary based on volume level and usage. Results will be lower when volume is higher.
FCC Statement
- This device complies with Part 15 of the FCC Rules. Operation is subject to two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
- This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
- This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
- If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna; Increase the separation between the equipment and receiver; Connect the equipment into an outlet on a circuit different from that to which the receiver is connected; Consult the dealer or an experienced radio/TV technician for help.
- RF warning statement: The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.
One Year Warranty
- This warranty covers the original consumer purchaser only and is not transferable.
- It covers products that fail to function properly under normal usage due to defects in material or workmanship. The product will be repaired or replaced at no charge for parts or labor for a period of one year.
- What Is Not Covered by Warranty: Damages or malfunctions not resulting from defects in material or workmanship, or from other than normal use, including but not limited to, repair by unauthorized parties, tampering, modification, or accident.
- To Obtain Warranty Service and Troubleshooting Information: Call 1-800-592-9541 in the U.S. or visit www.vivitar.com.
- To receive warranty service, contact the company for problem determination and service procedures. Proof of purchase (bill of sale or receipted invoice) within the warranty period is required. Package and send defective products with a dated proof of purchase, a written explanation of the problem, and a valid return address to the authorized service center at your expense. Do not include other items or accessories. Products not covered by warranty will be returned unrepaired.
Trademarks
- The Bluetooth® word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc.
- Any use of these marks by Sakar International is under license.
- Other trademarks and trade names are those of their respective owners.