Vivitar Speaker Floatie

Specifications

• Bluetooth Range: Up to 33 feet (10 meters)
• Battery Type: Polymer Lithium Ion Battery
• Charging Input: DC 5V 500 mA
• Play Time: Approximately 3-5 hours**
• Charging Time: Approximately 1-2 hours

**Applicable at 50% of maximum volume. Results will be lower when volume is higher.

A Quick Look

The speaker features a Power button and a USB Charging port.

The Bluetooth® word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc. and any use of such marks by Sakar International is under license. Other trademarks and trade names are those of their respective owners.

Charging

The included USB charging cable has a Micro USB plug and a standard USB plug.

To charge:

1. Insert the cable's standard USB plug into a computer's USB port or a suitable USB charging adapter.
2. Insert the cable's Micro USB end into the speaker's charging port.

Bluetooth Pairing

Step 1: Press and hold the Power button for 2-3 seconds to turn the speaker On. [Power Button Icon] ?

Step 2: On your phone, go to Bluetooth settings. Ensure Bluetooth is turned on. Connect to the device listed as "Speaker Floatie."

Other Functions: TWS (True Wireless Stereo)

TWS mode allows you to connect two speakers for stereo sound.

1. Turn on two speakers. Short press the power button on one speaker to enter TWS mode (do not perform standard Bluetooth pairing first).
2. Short press the power button twice on one of the speakers to initiate TWS pairing.
3. Wait for an audible confirmation (voice prompt) indicating TWS pairing is finished automatically.
4. Now, perform standard Bluetooth pairing with your phone to connect to the TWS pair.
5. To end TWS pairing: first disconnect the Bluetooth connection from your phone, then short press the power button twice on the speaker to exit TWS mode.

Vivitar One Year Warranty

This warranty covers the original consumer purchaser only and is not transferable. It applies to products that fail to function properly UNDER NORMAL USAGE due to defects in material or workmanship. Your product will be repaired or replaced at no charge for parts or labor for a period of one year.

What Is Not Covered by Warranty

Damages or malfunctions not resulting from defects in material or workmanship, or from other than normal use, including but not limited to, repair by unauthorized parties, tampering, modification, or accident.

To Obtain Warranty Service and Troubleshooting Information:

Call 1-800-592-9541 or visit our website at www.vivitar.com.

To receive warranty service, the original consumer purchaser must contact Sakar International for problem determination and service procedures. Proof of purchase (bill of sale or receipted invoice) within the applicable warranty period is required. Package defective products securely with a dated copy of proof of purchase, a written explanation of the problem, and a valid return address. Send to the authorized service center at your expense. Products received not covered by warranty will be returned unrepaired.

Sakar International
195 Carter Drive
Edison, NJ 08817
Support: 800 592 9541
www.vivitar.com

© 2022 Sakar International

Important Safety Precautions

1. READ ALL INSTRUCTIONS BEFORE USING YOUR SPEAKER.
2. Do not allow children to use the speaker without proper adult supervision.
3. Do not expose your speaker to excessive heat or fire.
4. Always press the buttons carefully.
5. Do not use in extremely dry environments as this can lead to static discharge during usage.
6. Do not expose your speaker to temperatures above 104°F (40°C). Keep out of direct sunlight.
7. Do not attempt to repair this product yourself. Contact a qualified service center if your speaker needs service.
8. Do not drop, puncture, or expose the speaker to extreme physical force.
9. Your speaker is not intended for commercial use.
10. Do not place the speaker near objects that generate a strong magnetic field.
11. Use only the included charging cable.
12. Unplug this device when not in use for long periods of time and during lightning storms.
13. Do not pull or yank on the power cable. Always remove the cable gently from wall outlets and the speaker's charging port.
14. Use a soft cloth to clean your speaker. Never use rubbing alcohol or other harsh chemicals.
15. Please recycle or dispose of your speaker properly based on the laws and rules of your municipality. Contact local recycling facilities and/or the manufacturer of your speaker for further information.
16. The device has been evaluated to meet general RF exposure requirements.

FCC Statement

Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.