Dr. Brown's Nipple Shield with Sterilizer Case
Product Sizes
Available in two sizes: Size 1 – up to 24 mm, and Size 2 – 25 mm and up.
Cleaning Instructions
Always use nipple shields under the care of a medical professional or lactation consultant. Before the first use and after every subsequent use, wash nipple shields with warm soapy water, rinse them clean, sterilize, and allow them to air dry.
Sterilizer Case Instructions
Place the nipple shields on top of the holders within the case. Add 5 teaspoons (1 oz or 25 ml) of water to the bottom reservoir. Securely close the case and microwave for 3 minutes using a 700-1000 watt microwave. Exercise caution when removing the case from the microwave as it will be hot. Drain any water from the case and open the lid to allow the nipple shields to dry and cool for at least 5 minutes. Once cool, wipe out any remaining water droplets to ensure the case is dry before closing the lid for storage.
How to Use
With clean hands, hold the nipple shield in both hands. Ensure the shiny side faces your skin and the matte side faces outwards.
[Diagram: Nipple shield held between thumb and forefinger, shiny side oriented towards the user's skin.]
Position the cut-out section of the shield where the baby's nose will be.
[Diagram: The nipple shield is placed on the breast, with the distinctive cut-out aligned to where the baby's nose would naturally rest.]
Gently stretch the shield over your breast, making sure your nipple fits completely within the shield.
[Diagram: The nipple shield is being carefully stretched to cover the entire nipple area.]
If necessary, a small amount of nipple cream can be applied to your skin to aid shield adhesion. Avoid applying cream directly to your nipple.
[Diagram: Illustrates the application of nipple cream to the skin surrounding the nipple, not the nipple itself, to improve grip.]
Smooth the sides of the shield down to ensure full adhesion and a secure fit against the breast.
[Diagram: The edges of the nipple shield are being gently pressed and smoothed onto the breast for complete adhesion.]
Product Model: BRW003_F1
