VEVOR Mobile Base

Product Overview

This document provides instructions for the VEVOR Mobile Base, Model GZB88094. It is designed to mobilize heavy equipment such as woodworking machinery, refrigerators, and washing machines.

Disclaimer: The terms "Save Half" or "Half Price" used by VEVOR represent an estimate of savings compared to major top brands and may not apply to all product categories. Customers are advised to verify savings at the time of purchase.

Model and Parameters

• Material: Alloy Steel
• Product Size: Minimum 20.75x23.75 inches, maximum 28x33.5 inches
• Load Capacity: 1500 lbs max.
• Note: When adjusted to the maximum installation size, the mobile base cannot be used with the maximum load capacity.

Safety Instructions

WARNING: Read and understand this manual before assembling, installing, operating, or servicing this product. Failure to follow these warnings and instructions can cause death, personal injury, or damage to valuable property.

1. Do not place near flammable materials.
2. Do not carry people under any condition.
3. This product cannot be used to go up or down stairs.
4. Overloading is strictly prohibited.
5. Do not move too fast when passing pothole areas.

SAVE THESE INSTRUCTIONS

Assembly and Use

1. Get everything ready.

   The package includes the mobile base components, wheels, bolts, nuts, and control levers. Refer to the diagrams for component identification.

   Diagram Description: An illustration shows the disassembled parts of the mobile base, including the frame, wheels, bolts, nuts, and levers.

2. Secure the wheels.

   Select the appropriate bolts and nuts to secure the wheels to the base frame. Ensure wheels are installed correctly as indicated in the diagrams.

   Diagram Description: Close-up views show how to attach the wheels to the base frame using bolts and nuts. Labels indicate "install wheel 1" and "install wheel 2".

3. Secure the control levers.

   Select the appropriate bolts and nuts to secure the control levers to the base frame.

   Diagram Description: An illustration shows the control lever being attached to the base frame with bolts and nuts. A label points to the "control lever".

4. Install and adjust connecting rods.

   Install the connecting rods and adjust their hole positions according to the size of the object to be transported. Ensure connection strength by fixing with two bolts per connection point.

   Diagram Description: An illustration shows the mobile base frame with connecting rods. Another illustration details fixing the connection with two bolts, emphasizing not to use only one.

5. Adjust control levers for movement.

   Adjust the control lever to a vertical state [⬆️] for pushing and pulling objects. After moving the object to the desired position, re-adjust the control lever to the horizontal state [➡️] to lock the base.

   Diagram Description: Two illustrations show the control lever in a vertical state (for movement) and a horizontal state (locked).

6. Level the mobile base.

   Adjust the mobile base to be level by rotating the supporting feet.

   Diagram Description: An illustration shows a supporting foot being rotated to adjust the level of the mobile base.

Maintenance

1. Avoid prolonged exposure to the sun to prevent aging of materials.
2. Inspect accessories for wear, cracks, and other damage before use. Replace defective accessories immediately.

Contact Information

For product questions or technical support, please visit:

www.vevor.com/support

Imported by:

• Australia: SIHAO PTY LTD, 1 ROKEVA STREET EASTWOOD, NSW 2122 Australia
• USA: Sanven Technology Ltd, Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730
• Germany (EC REP): SHUNSHUN GmbH, Römeräcker 9 Z2021, 76351 Linkenheim-Hochstetten, Germany
• United Kingdom (UK REP): Pooledas Group Ltd, Unit 5 Albert Edward House, The Pavilions Preston, United Kingdom

Manufacturer Address: Baoshanqu Shuangchenglu 803long 11hao 1602A-1609shi, Shanghai

Made In China