Dreamland Boutique Hotel Heated Mattress Protector

Illustrative Guide

The following diagrams illustrate the appliance and its components:

• [A] Power Connection: Shows the mains plug and the control unit connector.
• [B] Appliance Placement: Depicts the heated mattress protector positioned on a bed mattress, with the control unit connected and the power cord routed.
• [C] Control Unit and Settings: Illustrates the control unit with its buttons and LEDs. A temperature table indicates settings for Fast Pre-heat (6), Medium Pre-heat (5-4), and Continuous or All Night Use (3-1).

Description of the Appliance

1. Mattress Protector connector
2. Control unit connector
3. Mains socket
4. Rating Label
5. Mattress Protector
6. Timer selector
7. ON/OFF button
8. Temperature selector
9. Stand-by LED
10. Auto Shut Off Timer
11. Temperature LED

Technical Data

Symbols

Understanding the symbols used in this manual:

• Class II appliance
• ? Read the instructions
• ⚠ Caution/Warning/Danger
• ? Do not use folded or creased
• 30°C Wash at a maximum temperature of 30 °C on a delicate cycle
• Dry in a tumble dryer on a delicate cycle at a low temperature
• ? Do not iron
• ? Prohibition
• ⓘ Information
• 0-3 NOT to be used by very young children (0-3 years)
• ? Do not insert pins
• ? Do not bleach
• ? Do not dry clean

Important Instructions

⚠ WARNING! Instructions and warnings for safe use.

Carefully read all instructions and safety notes before use. Keep this manual with the illustrative guide for future reference. Pass them on if the appliance is transferred to a new user.

ⓘ NOTE: If any part of this manual is unclear, contact the company at the address provided.

ⓘ NOTE: For persons with impaired vision, instructions are available digitally at www.dreamlanduk.co.uk.

After unpacking, ensure the appliance is intact and complete. If in doubt, do not use and contact an authorised service centre.

⚠ WARNING! Risk of suffocation. Keep plastic packaging away from children.

This appliance is designed for heating beds at home. Any other use is considered dangerous and non-compliant.

Before connecting to the mains, verify that the voltage and frequency match the appliance's technical data (found on the rating label).

The appliance operates at 50 Hz or 60 Hz.

Use only with detachable control units marked for this appliance.

Safety Precautions

• Children under three years old must not use this appliance due to their inability to react to overheating.
• Children aged 3-8 years may use the appliance under supervision, with the temperature set to minimum (heat setting 1).
• Children aged 8 and above, and persons with reduced capabilities, may use it if supervised and instructed on safe use, understanding the hazards. Children must not play with the appliance. Cleaning and maintenance must be supervised.
• Do not use if you are insensitive to heat or very vulnerable to overheating.
• Arrange cables and control units safely to prevent entanglement, strangulation, or tripping.
• Always disconnect from the mains before cleaning, maintenance, or when not in use.
• Frequently examine the appliance for wear or damage. If misused or not working, contact an authorised service centre before re-use.
• If the supply cord is damaged, the entire appliance must be taken to an authorised service centre for replacement.
• On adjustable beds, ensure the blanket and cord do not get trapped or rucked.
• This appliance is not intended for medical use in hospitals.
• ? DO NOT use if wet.
• ? DO NOT USE FOLDED OR CREASED.
• ? DO NOT INSERT PINS OR NEEDLES.

Use and Operation

Storage Warning:

⚠ WARNING! Allow the appliance to cool before folding for storage. Do not place items on top of it during storage.

⚠ WARNING! Follow instructions for use, cleaning, maintenance, and storage.

• ? DO NOT use with wet hands or feet.
• ? DO NOT pull the power cable or appliance to remove the plug.
• ? DO NOT pull or lift by the supply cord.
• ? DO NOT expose to humidity, weather, or extreme temperatures.
• If faulty, switch off and do not tamper; contact an authorised service centre.
• ? DO NOT use to warm animals.
• ? DO NOT tuck in.
• Refer to external packaging for appliance characteristics.

Positioning the Mattress Protector

⚠ WARNING! Place the mattress protector ONLY between the mattress and the flat sheet, not on top of persons in bed.

IMPORTANT: For efficient operation, the protector must be inside the bed and covered by a sheet, covers, or quilt.

• Place the mattress protector (5) directly onto the mattress, with the connector side facing downwards at the top.
• Fit the protector by tucking the elasticated skirt edges under the mattress. Ensure it is spread smoothly without creases.
• Make the bed by laying the first sheet over the protector, followed by the second sheet, blanket, or duvet.

Connecting the Control Unit

• Pass the control unit connector through the triangle opening on the side of the elasticated skirt.
• Insert the control unit connector (2) into the mattress protector connector (1).
• For dual control models, repeat for the other side.
• Run the control unit cable along the floor next to the bed, ensuring it is not squashed between the mattress and bed frame.
• Insert the control unit cable plug into the mains socket (3). The control unit performs a self-diagnosis upon insertion, lighting up all LEDs (10, 11) sequentially.

Switching On and Selecting Temperature

Temperature levels:

• 6: Fast Pre-heat
• 5-4: Medium Pre-heat
• 3-1: Continuous or All-Night Use

• To switch on, press the ON/OFF button (7). The appliance performs an automatic check, lighting up LEDs (10, 11). It defaults to temperature 6 and a 1-hour auto shut-off timer.
• For fast pre-heating, use temperature 6. For medium pre-heating, select 4-5 using the temperature selector button (8) until the corresponding LED (11) lights up. Higher numbers indicate higher temperatures.

IMPORTANT: Evaluate the temperature by lying in the bed, not just by touching it.

Continuous or All Night Use

For continuous or all-night use, set the control unit to temperature levels 1 to 3 only.

To set for continuous use, press the temperature selector button (8) until LEDs 1, 2, or 3 light up (11).

⚠ DO NOT get into bed with the control unit set to a higher temperature than recommended for continuous use. Doing so may result in skin burns or heat stroke.

⚠ WARNING! DO NOT place the control unit under the pillow or under the sheets when in use.

Auto Shut Off Timer

The mattress protector has an automatic shut-off timer of 1, 3, or 9 hours. When switched on, it defaults to 1 hour, indicated by the 1h LED (10) lighting up green.

To set a different timer, press the timer selector button (6) and select the desired duration. Each reset starts the timer from zero.

When the timer elapses, the protector switches off, and the standby LED (9) lights up blue.

ⓘ NOTE: If the power supply is interrupted, the appliance will resume previous temperature and timer settings when switched back on.

ⓘ NOTE: The display light intensity and standby LED brightness reduce after a period of inactivity to avoid disturbing users at night.

Switching Off

Switch off the mattress protector by pressing the ON/OFF button (7) and remove the plug from the socket (3).

Cleaning and Maintenance

The mattress protector is washable. Always check the washing symbols on the label for correct care.

⚠ WARNING! Always disconnect the appliance from the mains and disconnect the control connector from the mattress protector before cleaning or performing maintenance.

Before Washing

• Unplug the control unit cable from the mains socket (3).
• Press the grip levers on the control unit connector (2) to detach it from the mattress protector connector (1).

Machine Washing

• Wash in a washing machine at 30°C on a delicate cycle.
• Pre-treat any stains by spot cleaning before washing.
• Use only the delicate cycle for spinning. Do not use an additional spinning cycle.

Drying in the Tumble Dryer

• The mattress protector can be dried in a tumble dryer on a delicate cycle.
• After the drying cycle, it must be air-dried to ensure complete dryness.
• Remove from the tumble dryer and reshape to its original size.
• Allow to fully air-dry before re-use.

Drying in the Open Air

When drying on a clothes airer, stretch the mattress protector to maintain its original size. This is best done while damp, working on opposite corners and pulling sides alternately. Repeat as necessary until completely dry.

⚠ WARNING! Spread the appliance out without using clothes pegs to avoid damage. Dry on a rack away from direct sunlight.

Only use the mattress protector when it is thoroughly dry.

? Do not iron the mattress protector.

⚠ WARNING! Examine the appliance against the light to ensure cables are not bent or twisted.

⚠ WARNING! Dry the appliance flat without using pegs to avoid damage. Lay it flat on a clothes airer, not in direct sunlight.

Storing the Mattress Protector

When not in use:

• If washed, wait until completely dry.
• Fold it like a normal blanket.
• It is advised to store it in its original packaging.
• Allow the appliance to cool down before folding for storage.
• Store the mattress protector in a dry place.

The fabric may yellow over time, but this does not affect the product's safety or effectiveness.

Frequently examine the appliance and its supply cord for signs of wear or damage. If any signs are present or if the appliance malfunctions, contact an authorised technical service centre.

Troubleshooting

This section addresses common problems. If issues persist, contact the Authorised Service Centre.

Disposal

The packaging is made of recyclable materials. Dispose of it according to environmental regulations.

The crossed bin symbol (?️) on the appliance or packaging indicates it must be disposed of separately from other waste at the end of its life, in accordance with Directive 2012/19/EU (WEEE).

Users must take the appliance to an appropriate recycling centre for electrical and electronic equipment.

Alternatively, users can hand over the appliance to a retailer when purchasing an equivalent new product. Retailers of electronic products with a sales area of at least 400 m² must accept electronic products measuring less than 25 cm free of charge and without obligation to buy.

Proper waste sorting contributes to environmental protection and promotes reuse and recycling.

Guarantee

This product is guaranteed for 3 years against material, mechanical, and electrical defects from the date of purchase, provided it is accompanied by a valid receipt.

The guarantee is valid only for domestic use, in accordance with instructions, and not for appliances connected to unsuitable electricity supplies, dismantled, tampered with, damaged through misuse, or subject to fair wear and tear.

Dreamland undertakes to repair or replace defective parts free of charge.

PLEASE NOTE: The cost of a safety inspection is NOT covered by this guarantee. A charge will apply for products returned where no fault is found.

This guarantee is an additional benefit and does not affect your statutory consumer rights.

Dreamland is not liable for indirect or consequential loss or damage. Statutory rights are not excluded, restricted, or otherwise affected by this guarantee.

In line with continuous development, Dreamland reserves the right to change product, packaging, and documentation without notice.

If a defect appears and the blanket has been used correctly, return it with proof of purchase to the manufacturer's Service Centre as soon as possible. This guarantee is valid in the UK only.

Service Centre

PO Box 166 – Middlewich – Cheshire – CW10 0ZU

Tel: 0333 0050305

E-mail: customerservice@imetec.co.uk

Website: www.dreamlanduk.co.uk