Dreamland Luxury Warming Throw

Description of the Appliance

The Dreamland Luxury Warming Throw is designed for comfort and warmth. Key components include:

• 1. Throw connector
• 2. Control unit connector
• 3. Mains socket
• 4. Rating Label
• 5. Throw
• 6. Timer selector
• 7. ON/OFF button
• 8. Temperature selector
• 9. Stand-by LED
• 10. Auto shut off timer LED
• 11. Temperature LED

Technical Data

All models (R7507, R7526, R7523) operate on 220-240 V, 50/60 Hz, with a power consumption of 150 W.

Symbols

The appliance uses several symbols to indicate its features and safety requirements:

Important Instructions

WARNING! Instructions and warnings for safe use. Read carefully before use and retain for future reference.

Ensure the appliance is intact after unpacking. Use only for its intended purpose as a throw for home use. Verify mains voltage and frequency match the appliance's rating. This appliance is designed for 50 Hz or 60 Hz operation and must only be used with compatible detachable control units.

Children under three years must not use this appliance due to their inability to react to overheating. Children aged 3 to 8 years may use the appliance under supervision with the control set to minimum temperature (heat setting 1). Children aged 8 years and above, and persons with reduced physical, sensory, or mental capabilities, may use the appliance if given supervision or instruction on safe use and understanding the hazards.

Children shall not play with the appliance. Cleaning and user maintenance must not be carried out by children without supervision. The appliance must not be used by persons insensitive to heat or other vulnerable persons unable to react to overheating.

Arrange electric cords safely to prevent risks of entanglement, strangulation, tripping, or treading. Always disconnect from the mains supply before cleaning, maintenance, or when not in use. Examine the appliance frequently for wear or damage. If damaged or malfunctioning, contact an authorized service center before reuse. If the supply cord is damaged, the entire appliance must be taken to an authorized service center for control unit replacement.

If used on an adjustable bed, ensure the blanket and cord do not become trapped. This appliance is not intended for medical use in hospitals. DO NOT use if wet. DO NOT insert pins or needles.

WARNING! DO NOT crease the appliance by placing items on top of it during storage.

Allow the throw to cool down before folding for storage.

General Use Precautions:

• DO NOT use with wet hands or damp feet.
• DO NOT pull the power cable or the appliance to remove the plug.
• DO NOT pull or lift the appliance by the supply cord.
• Avoid exposure to humidity, weather effects, or extreme temperatures when used outdoors. DO NOT leave the appliance outside after use.
• If the appliance is faulty or malfunctions, switch it off and do not tamper with it. Contact an authorized technical service center for repairs.
• DO NOT use this appliance to warm animals.
• DO NOT tuck in.
• Refer to external packaging for appliance characteristics.

Use

Spread the throw over your sofa, armchair, or bed, ensuring the throw connector is positioned at the foot. Place the throw over yourself without wrapping it tightly or sitting on it, as this may activate the overheat protection system.

Connecting the Control Unit

Insert the control unit connector (2) into the throw connector (1). Then, insert the plug of the control unit cable into the mains socket (3). Upon connection, the control unit performs a self-diagnosis, lighting up all LEDs (10, 11) sequentially.

Switching On and Selecting Temperature

The control unit offers several temperature levels:

• 6: Fast Pre-heat
• 5-4: Medium Pre-heat
• 3-1: Continuous or All-Night Use

Press the ON/OFF button (7) to switch on. The control unit will perform a self-check. It defaults to temperature 6 and a 1-hour timer. Adjust temperature using the selector (8) until the desired temperature LED (11) illuminates. For accurate temperature judgment, lie on the sofa with the throw draped over you; do not rely on a hand placed on the throw.

Continuous Use: For continuous use, select temperature levels 1 to 3 only. DO NOT select higher temperatures for continuous use to avoid skin burns or heat stroke.

WARNING! DO NOT place the control unit under a pillow or sheets when in use.

Auto Shut Off Timer

The throw features an automatic shut-off timer with options for 1, 3, or 9 hours. When switched on, it defaults to 1 hour (LED 1h lights up green). Press the timer selector button (6) to choose a different duration. The timer resets to zero each time it is adjusted. Upon timer expiration, the throw switches off, and the standby LED (9) illuminates blue.

Note: If the power supply is interrupted, the control unit will resume the previous temperature and timer settings upon reactivation, with the timer starting from zero. The light intensity of the display and standby LED reduces after approximately 15 seconds of inactivity.

Switching Off

Press the ON/OFF button (7) to switch the throw off and remove the plug from the socket (3).

Cleaning and Maintenance

The throw is washable. Always disconnect the appliance from the mains and the control connector from the throw before cleaning.

Before Washing:

• Unplug the control unit cable from the mains socket (3).
• Press the grip levers on the control unit connector (2) to detach it from the throw connector (1).

Machine Washing:

• Wash the throw in a washing machine at 30°C on a delicate cycle.
• Spot clean stains before washing.
• Use only the delicate cycle for spinning; do not use an additional spinning cycle.

Drying in the Tumble Dryer:

• Dry the throw in a tumble dryer on a delicate cycle at a moderate temperature.
• After the drying cycle, reshape the throw to its original size while damp.
• Allow the throw to air-dry completely before use.

Drying in the Open Air:

• Spread the throw on a clothes airer, stretching it to maintain its original size, especially while damp. Repeat this process until fully dry.

WARNING! Dry the appliance flat without using pegs to avoid damage. Dry on a clothes airer, not in direct sunlight.

Ensure the throw is thoroughly dry before use. Do not iron the throw.

WARNING! Examine the appliance against the light to ensure cables are not bent or twisted. If the appliance does not resume its original size or if internal cables have issues, contact an authorized service center for a safety check.

Storing the Throw

Ensure the throw is completely dry before storing. Fold it like a normal throw. It is recommended to store it in its original packaging in a dry place. Allow the appliance to cool down before folding.

Frequently examine the appliance and its supply cord for signs of wear or damage. If any are found, or in case of malfunction, contact an authorized technical service center.

Troubleshooting

Disposal

Dispose of packaging materials according to environmental regulations. The crossed-out bin symbol on the appliance indicates it must be disposed of separately from household waste at the end of its life. Take the appliance to an appropriate recycling center for electrical and electronic equipment. Alternatively, hand it over to the retailer when purchasing a new, equivalent product. Small electronic products (under 25 cm) can be returned free of charge to retailers with a sales area of at least 400 m².

Proper waste sorting contributes to environmental protection and promotes the reuse and recycling of materials.

Guarantee

This product is guaranteed for 2 years from the date of purchase against material, mechanical, and electrical defects. The guarantee is valid with a proof of purchase and applies only to domestic use, provided the appliance is not misused, tampered with, or damaged. Dreamland undertakes to repair or replace any defective parts free of charge.

The cost of a safety inspection is not covered by this guarantee. A charge will be made for products returned where no fault is found. This guarantee is an additional benefit and does not affect your statutory consumer rights. Dreamland reserves the right to change product, packaging, and documentation without notice as part of its continuous development policy.

If a defect appears, return the product with proof of purchase to the manufacturer's Service Centre as soon as possible. This guarantee is valid in the UK only.

Service Centre

PO Box 166 - Middlewich - Cheshire - CW10 0ZU

Tel: 03330050305

E-mail: customerservice@imetec.co.uk

Website: www.dreamlanduk.co.uk