AMEWI ATXB6 6-Channel Remote Control

Welcome to AMEWI

The AMEWI Trade GmbH is an international import- and wholesale company for R/C models, toys and creative items, located in Borchen near Paderborn, Germany. Our product range includes over 10,000 items. Above all, this includes remote-controlled car, helicopter, boat, and tank models as well as a wide range of accessories and all necessary spare parts. Our sales network includes over 700 specialist dealer and online retailers across Europe.

The company AMEWI Trade GmbH is a pure wholesale company. We only sell our products to retailers. When you purchase AMEWI products as an end consumer, you are entering into a contract with the retailer. Please always contact your dealer in warranty cases.

AMEWI Trade GmbH
Nikolaus-Otto-Str. 18
33178 Borchen
Germany

Service times: Tuesday 9:30 AM – 12:00 PM | Thursday 2:00 PM – 4:30 PM
Phone: +49 180 5009821 (Landline 14Ct/Min., Mobile max. 42Ct/Min.)
Support: https://amewi.com

Declaration of Conformity

This product has been manufactured according to actual technical standards. The product is matching the requirements of the existing European and national guidelines. The Declaration of Conformity has been proofed. AMEWI Trade GmbH declares that this product is matching the basic requirements and remaining regulations of the guideline 2014/53/EU (RED). The declarations and documents are stored at the manufacturer and can be requested and applied there. https://amewi.com/Konformitaetserklaerungen

For additional questions to the product and conformity please contact:

Amewi Trade GmbH Nikolaus-Otto-Str. 18, 33178 Borchen Germany or website https://amewi.com.

CE

Security and Hazard Warnings

Warning: Failure to comply with this manual will void the warranty. We are not liable for secondary failures, material, or personal damage caused by improper usage or disregarding the security notices.

Based on security and registration (CE) reasons, it is forbidden to modify the product personally. Do not disassemble the product.

Caution: Small parts. Danger of suffocation or risk of injury caused by small parts.

Suitable for people aged 14+!

The product is not allowed to get moist or wet. The product is only allowed to be used on flat and clean surfaces. Even a drop down from a small height can cause damage to the product.

Battery Notice & Disposal

Notice: Batteries / rechargeable batteries do not belong in the hands of children.

Batteries or rechargeable batteries may only be changed by an adult. Never mix rechargeable batteries with dry batteries. Never mix full batteries with half-empty batteries. Never mix rechargeable batteries of different capacities. Never attempt to charge dry batteries. Ensure correct polarity. Defective rechargeable batteries/batteries must be disposed of properly (hazardous waste). Never carry out the charging process unsupervised. If you have any questions about the charging time, read the operating instructions or contact the manufacturer.

Read the safety instructions and warnings before using or charging the Li-ion battery.

Stop using or charging immediately if the battery is leaking, has a temperature of over 70° C or anything else unusual occurs. Always charge and store batteries on a fireproof surface or in a fireproof LiPo bag.

Only use a qualified and specific Li-Po/Li-Ion charger for Li-Po/Li-Ion batteries or NiMH charger for NiMH batteries. Never charge the battery unattended. Do not charge the battery if the charging process exceeds 4.2 V / cell. Do not charge the battery with a charging current above 2C. Please check and ensure that you are using a qualified charger. An unqualified charger may cause a fire. Do not discharge the battery with a current that exceeds the maximum discharge current. Otherwise, this will cause the battery to overheat. This can lead to bursting, fire or explosion.

Never disassemble, puncture, knock, drop, short-circuit and/or throw the battery into a fire. Improper use such as short-circuiting or overcharging can lead to explosions or fire.

Store the battery in a safe place where infants or children cannot reach it.

The above indicates the danger of using the battery. The user assumes full responsibility for the result of using the battery. Please be sure to observe our safety instructions which you can find online at https://amewi.com/downloads/manuals/Akku-Sicherheitshinweise.pdf

Disposal Instructions

The company AMEWI Trade GmbH is registered under Batt-Reg.-No. DE 77735153 and WEEE-Reg.-No. 93834722 at the foundation EAR and recycles all used electronic parts properly. Electric and electronical products are not allowed to put in household garbage. Please dispose the product at the end of the lifetime according to the actual laws. You as a customer are responsible by law for the return of all used batteries, a disposal over the household garbage is forbidden!

Batteries containing hazardous substances are marked with the alongside symbols, which point to the prohibition of disposal in household garbage.

Additional notations for the critical heavy metal are Cd=Cadmium, Hg=Quicksilver, Pb=lead {Label is placed on the batteries, for example below the bottom left trash symbols).

RoHS
Based on RoHS labelling the manufacturer confirms, that all limit values were taken care of at the time of manufacturing.

Batteries labelled with the recycling symbol can be put into used battery collecting tank. (Most supermarkets have)
They are not allowed to be put into local household garbage.

AMEWI Trade GmbH is involved in the dual system for boxing over the company Landbell AG. All used boxes are collected from partner companies (waste disposal contractor) at private customers (local household), sorted and properly utilized. The involvement in a Dual Systems helps to save CO2 Emissions.

Thank You

Thank you for purchasing the Amewi ATXB6 remote-control. Please read the instruction manual carefully and keep it for future reference.

On Inappropriate Use of the Product

Please do not disassemble or modify the model in any way. Do not use this product improperly or illegally and do not operate it in a manner that could endanger others or yourself.

Maximum Transmitting Power Data

Channel Description

Charging Port: Charging Port

Ring Hook: Ring Hook

Channel 4 / CH4

Channel 3 / CH3

Antenna: Antenna

Steering Wheel: Steering Wheel

One handed control: One handed control

Throttle Trigger: Throttle Trigger

Battery Compartment for 18650 Li-Ion Batteries: Compartment for Li-Ion 18650 Batteries

Battery Compartment for AA Batteries / 2S LiPo: Compartment for AA or 2S Li-Po

Transmitter / Receiver Binding

The transmitter and receiver are already connected when delivered. Should it ever be necessary to re-establish the connection, follow the steps described below:

1. Switch on the receiver first, the LED flashes slowly.
2. Press the BIND button on the receiver, the LED flashes faster. The receiver is in bind mode.
3. Hold in the remote control, the LED lights up continuously. The connection has been established.

Failsafe Activation

The receiver can be set so that it brakes the vehicle when the signal is lost (combustion engine only) or allows it to coast. When delivered, the failsafe function is set so that the engine coasts and does not accelerate any further. To adjust the failsafe function, follow the steps below.

1. Make sure that the transmitter and receiver are switched off.
2. Press and hold the lowest trim button (reverse trim) and switch on the remote control. A sound is emitted and the indicator light flashes quickly. This indicates that the remote control is in setting mode.
3. Now press the throttle lever to the desired position (for electric vehicles, leave the lever in the neutral position; for combustion engines, press the lever to the brake position).
4. Press the lowest trim button again to save the setting and exit setting mode.

Lock Function

The setting buttons can be locked to prevent accidental operation.

A. Switch off the remote control.

B. Press and hold the reverse button and switch the remote control on. The lock symbol appears on the display. Deactivating the lock function is done in the same way.

Reverse Function

The direction can be changed for channel 1 (steering) and 2 (throttle).

A. Press and hold the reverse button for one second to enter the setting mode. The remote control emits a tone sequence and the indicator light flashes.

B. Now move the throttle stick or the steering wheel to reverse the direction of the respective channel.

NOTE: Please note that only one channel can be reversed at a time. To reverse the second channel as well, the function must be called up again.

CH1/CH2 Hybrid Control

The hybrid control mode allows channel 1 and channel 2 to control the differential function of two motors simultaneously.

A. Press and hold the hybrid control button for one second.

B. You can now switch through the hybrid modes. The display will show (1) to indicate the respective mixing mode 1/2.

CH5/CH6 Hybrid Control

The hybrid control mode allows channel 5 and channel 6 to control simultaneously two signals through one channel.

C. Press and hold the hybrid control button for one second.

D. You can now switch through the hybrid modes. The display will show (2) to indicate the respective mixing mode 5/6.

CH3/4/5/6 Servo Setting

The servo amount of each channel 3/4/5/6 of the remote control can be set separately.

A. Ensure that the remote control is switched off.

B. Press and hold the hybrid control button and switch on the remote control. You are in servo setting mode.

C. The servo amount can be set by pressing the button for the respective channel.

D. Press the hybrid control button again to save the settings.

Note: Setting the servo amount for channels 3/4/5/6 is a cyclical adjustment process from large to small. Each time the button is pressed, the travel is reduced by 50 servo values.

Battery Usage

The remote control can be operated with AA batteries, a 18650 lithium cell and a 2S LiPo rechargeable battery. Despite reverse polarity protection, always ensure correct polarity when inserting/connecting the batteries/rechargeable battery.

If the batteries/rechargeable battery are low, the indicator light flashes. Please replace the batteries or charge the rechargeable battery as soon as possible.

For operation with a 2S LiPo battery, you will find ONE connection in the battery compartment. Please do not use Li-Pos with more than two cells.

Automatic Shutdown

To prevent damage to the batteries, the remote control is equipped with an automatic shutdown function. If no control commands are issued within 15 minutes, it switches off automatically. The remote control emits warning tones one minute before shutdown.

Receiver Parameter

Voltage return interface: Schnittstelle zur Spannungsrückführung

Bind Button: Bindeknopf

Channels:

• Kanal 1 / CH1
• Kanal 2 / CH2
• Kanal 3 / CH3
• Kanal 4 / CH4
• Kanal 5 / CH5
• Kanal 6 / CH6

Input Voltage: Stromversorgung / Input Voltage