TP-Link Omada EAP650 D120-Outdoor
AX3000 Indoor/Outdoor Wi-Fi 6 Access Point
Highlights
- 5 GHz: 2402 Mbps, 2.4 GHz: 574 Mbps*
- Built-in high-gain directional antennas for long-range coverage support*
- IP68 waterproof and dustproof casing for reliable operation from -30°C to 70°C
- Supports seamless connectivity for AGVs, handheld scanners, etc.*
- Supports 802.3at PoE and Omada Mesh technology
- Control your entire network from a single interface anywhere via the Omada app or web UI*
Product Appearance
A white, square-ish Wi-Fi access point with rounded corners, featuring the TP-Link Omada logo.
Dimensions & Ports
Front View: Width: 230 mm, Height: 207.5 mm. Features LED Indicators.
Side View: Height: 58 mm. Includes 1× Gigabit PoE+ Port and Reset Button.
Mounting
Flexible Installation: Easily adjust to desired direction via horizontal rotation using the included bracket. (Mounting bracket accessories are optional and must be purchased separately).
*Coverage values are based on laboratory test conditions. Actual coverage may vary due to client limitations and environmental factors.
**Actual client connection counts vary depending on wireless environment and client traffic, and are generally lower than the maximum client capacity.
Omada Solution
The Omada Software Defined Networking (SDN) platform integrates network devices such as access points, switches, and routers, supporting 100% centralized cloud management. All devices can be controlled from a single interface, offering high network scalability.
Product Specifications
| Model | EAP650 D120-Outdoor |
|---|---|
| Name | AX3000 Indoor/Outdoor Wi-Fi 6 Access Point |
| LAN Interface | 1× Gigabit Ethernet Port |
| Wi-Fi Standard | IEEE 802.11 a/b/g/n/ac/ax |
| Max Data Rate | 574 Mbps (2.4 GHz) + 2402 Mbps (5 GHz) |
| Wireless Client Capacity | 256 |
| Bluetooth | Supported |
| Antenna | 2.4 GHz: 2× 8 dBi 5 GHz: 2× 10 dBi |
| Key Design | |
| Transmit Power | CE: <20 dBm (2.4GHz, EIRP); <23dBm (5 GHz, band1&band 2, EIRP); <30 dBm (5 GHz, band 3, EIRP) FCC: <30 dBm (2.4 GHz); <30dBm (5 GHz) |
| Receive Sensitivity | 2.4 GHz: 11ax HE20 MCS0:-95 dBm; 11ax HE20 MCS11:-66 dBm 11ax HE40 MCS0:-93 dBm; 11ax HE40 MCS11:-64 dBm 5 GHz: 11ax HE20 MCS0:-95 dBm; 11ax HE20 MCS11:-65 dBm 11ax HE40 MCS0:-92 dBm; 11ax HE40 MCS11:-63 dBm 11ax HE80 MCS0:-89 dBm; 11ax HE80 MCS11:-60 dBm |
| Centralized Management | Omada Software Controller Omada Hardware Controller Omada Cloud-Based Controller Omada App |
| Security | |
| Access Control | |
| Max MAC Filter Count | 4,000 |
| Wireless Isolation Between Clients | Supported |
| VLAN | Supported |
| Rogue AP Detection | Supported |
| Wireless Encryption | WPA-Personal/Enterprise, WPA2-Personal/Enterprise, WPA3-Personal/Enterprise |
Wireless Features
| Model | EAP650 D120-Outdoor |
|---|---|
| Multiple SSIDs | 16 (8 per band) |
| Channels | 2.4G: 1-11 5G: 36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140, 149, 153, 157, 161, 165 |
| Wireless Frequency Enable/Disable | |
| SSID Broadcast Enable/Disable | |
| Guest Network | |
| Auto Channel Selection | |
| Transmit Power Control | Adjustable transmit power in dBm |
| QoS (WMM) | Supported |
| Seamless Roaming | 802.11k/v/r |
| Mesh | Supported |
| Beamforming | Supported |
| MU-MIMO | 2×2 (2.4 GHz & 5 GHz) DL/UL MU-MIMO |
| MIMO | 2x2 (2.4 GHz & 5GHz) MIMO |
| OFDMA | DL/UL OFDMA |
| Speed Limit | SSID/Client based |
| Load Balancing | |
| Airtime Fairness | |
| Band Steering | |
| RADIUS Accounting | |
| MAC Authentication | |
| Reboot Schedule | |
| Wireless Schedule | |
| Wireless Statistics | |
| Static IP/Dynamic IP |
| 802.11ax | 8 Mbps ~ 2402 Mbps (MCS0-MCS11, NSS = 1~2 HE20/40/80/160) |
|---|---|
| 802.11ac | 6.5 Mbps~1733 Mbps (MCS0-MCS9, NSS = 1~2 VHT20/40/80/160) |
| 802.11n | 6.5 Mbps ~ 300 Mbps (MCS0-MCS15, HT20/40) |
| 802.11g | 6, 9, 12, 18, 24, 36, 48 ,54 Mbps |
| 802.11b | 1, 2, 5.5, 11 Mbps |
| 802.11a | 6, 9, 12, 18, 24, 36, 48 ,54 Mbps |
Management
| Model | EAP650 D120-Outdoor |
|---|---|
| LED Control | On/Off control |
| MAC Access Control | Supported |
| Web-based Management | Supported |
| SNMP | v1, v2c, v3 |
| SSH | Supported |
| Backup and Restore | Supported |
| Firmware Update via Web | Supported |
| NTP | Supported |
| System Log | Supported |
| Email Notifications | Supported |
Physical & Environmental
| Model | EAP650 D120-Outdoor |
|---|---|
| Power Supply | 802.3at PoE or 48V Passive PoE |
| Max Power Consumption | 14.7 W (802.3at PoE or Passive PoE) |
| Reset | Supported |
| Installation | Includes bracket accessories (optional): Supports ±45° vertical and ±45° horizontal adjustment. Note: Mounting bracket accessories must be purchased separately. |
| Certifications | KC, CE, FCC, RoHS |
| Dimensions (W x D x H) | 230 x 207.5 × 58 mm |
| Net Weight | 1.4 kg |
| Chassis/Rack Material | Top Cover: PC + GF10% Bottom Case: PC + GF10% Mounting Rack: SUS304 |
| Other | |
| Lightning Protection | Air Discharge: ± 8 kV Contact Discharge: ± 4 kV Common Mode 10/700: ± 6 kV |
| Operating Environment | Operating Temperature: -30°C~70°C (-22°F ~ 158°F) Storage Temperature: -40°C~70°C (-40°F ~ 158°F) Operating Humidity: 10% ~ 90% non-condensing Storage Humidity: 5%~90% non-condensing |
Antenna Radiation Patterns
Antenna radiation patterns illustrate signal strength distribution across different angles and frequencies. These plots show the directional coverage of the antennas for the EAP650 D120-Outdoor model at various frequencies and orientations.
2.45 GHz
Elevation 0°
Elevation 90°
Azimuth
3D Mapping
5.25 GHz
Elevation 0°
Elevation 90°
Azimuth
3D Mapping
5.5 GHz
Elevation 0°
Elevation 90°
Azimuth
3D Mapping
5.75 GHz
Elevation 0°
Elevation 90°
Azimuth
3D Mapping
Important Notes
- Maximum wireless transmission rates are derived from the IEEE 802.11 standards specifications. Transmit/receive range, connection range, and maximum number of connected devices are based on test results under typical usage conditions. Actual wireless throughput, wireless coverage, and the number of connected devices are not guaranteed and may vary depending on factors such as: 1) environmental factors including building materials, physical objects, and obstacles; 2) network conditions including local interference, traffic volume and density, product location, network complexity, and network overhead; 3) rated performance, location, connection quality, and client status, including client limitations.
- To use Wi-Fi 6 (802.11ax) and features like OFDMA and 1024-QAM, client devices must support these features.
- Actual client connection counts vary depending on the wireless environment and client traffic, and are generally lower than the maximum client capacity.
- Omada Mesh, Seamless Roaming, and Cloud Access require an Omada SDN Controller. Refer to the Omada Mesh product list to check models supporting Omada Mesh technology and consult the Omada SDN Controller User Guide for setup instructions.
- Proper product setup, grounding, and cable shielding can protect the device from lightning strikes and electrostatic discharge. Consult the user manual and seek assistance from IT professionals for product setup.
- Actual network speed may vary depending on the product's Ethernet WAN or LAN port speed, network cable support speed, Internet Service Provider factors, and other environmental conditions.
- PoE supply figures are based on laboratory test conditions. Actual PoE supply is not guaranteed and may vary due to client limitations and environmental factors.
- To use MU-MIMO functionality, client devices must also support MU-MIMO.
Some models introduced in this guide may not be available in your country or region. Please check the TP-Link official website for local sales information: https://www.tp-link.com/kr/. Product specifications are subject to change without prior notice.
© 2025 TP-Link
