DEWALT
ANCHORS & FASTENERS
AC200+™ VS. Hilti* HY-200
PRODUCT COMPARISON
| Product Name | AC200+ | HY 200 |
|---|---|---|
| Company | DEWALT | Hilti* |
| Description | Adhesive Anchoring System | Adhesive Anchoring System |
| Size Range (inch) | 3/8, 1/2, 5/8, 3/4, 7/8, 1, 1-1/4 | 3/8, 1/2, 5/8, 3/4, 7/8, 1, 1-1/4 |
| Rebar Size Range | #3, #4, #5, #6, #7, #8, #9, #10 | #3, #4, #5, #6, #7, #8, #9, #10 |
| ICC-ES ESR (concrete) | ESR-4027 | ESR-3187 |
| Revision Date | 2017 Jan | 2016 Nov |
| Cracked Concrete | Yes | Yes |
| Seismic Approval in Concrete | Yes | Yes |
| Post-Installed Rebar Design | Yes | Yes |
| LEED | Yes | Yes |
| VOC | Yes | Yes |
| NSF 61 (potable drinking water) | Yes | Yes |
* Hilti is a registered trademark of Hilti Corporation.
PRODUCT PERFORMANCE COMPARISON
Factored Tension Loads Cracked Concrete
This chart compares the factored tension loads for various anchor sizes and embedment depths in cracked concrete. It displays two sets of bars for each anchor configuration: one representing the DEWALT AC200+ and the other representing the Hilti HY-200. The Y-axis represents load in pounds (LBS), ranging from 0 to 25,000. The X-axis shows anchor diameter in inches (Ø Anchor) and corresponding embedment depth in inches (hef). For example, at a 1/2-inch anchor diameter with 4-inch embedment, both products show a load capacity around 5,000 LBS. As anchor size and embedment depth increase, the load capacity generally increases for both products. The data indicates comparable performance across most configurations, with slight variations at larger sizes and depths. Specific bond strength values are provided for different temperature conditions: DEWALT AC200+ values are based on 122°F long-term and 176°F short-term temperatures, while Hilti HY-200 values are based on 110°F long-term and 130°F short-term temperatures, both tested with 2500 psi Rod ASTM A193 Grade B7 under sustained loading and periodic special inspection.
Factored Shear Loads Cracked Concrete
This chart illustrates the factored shear loads for various anchor sizes and embedment depths in cracked concrete, comparing the DEWALT AC200+ and Hilti HY-200. The Y-axis indicates load in pounds (LBS), from 0 to 15,000. The X-axis denotes anchor diameter in inches (Ø Anchor) and embedment depth in inches (hef). Similar to the tension load chart, both products exhibit comparable shear load capacities across different anchor sizes and embedment depths. For instance, with a 1/2-inch anchor diameter and 4-inch embedment, both products achieve approximately 4,500 LBS in shear load. The trend shows increasing shear capacity with larger anchors and deeper embedment for both systems. The performance data is qualified by testing conditions: DEWALT AC200+ bond strength values are measured at 122°F long-term and 176°F short-term temperatures, while Hilti HY-200 values are measured at 110°F long-term and 130°F short-term temperatures. Both were tested with 2500 psi Rod ASTM A193 Grade B7 under sustained loading and periodic special inspection.
