MotoMaster 011-2062-4 Jump Starter and Power Bank

Safety Instructions

? IMPORTANT: SAVE THESE INSTRUCTIONS!

This manual contains important safety and operating instructions. Read all instructions and follow them.

DO NOT RETURN THIS PRODUCT TO THE STORE! QUESTIONS? CALL CUSTOMER SERVICE, HOTLINE: 1-888-942-6686

Abbreviations and Acronyms

⚠️ WARNING!

This jump starter generates a high current of up to 600 peak Amps. Read and understand all safety information before using this product. Failure to follow these safety instructions may cause ELECTRIC SHOCK, EXPLOSION, or FIRE, which may result in SERIOUS INJURY, DEATH or PROPERTY DAMAGE.

• This product is only compatible with 12V lead acid batteries. DO NOT attempt to use product with any other battery types.
• This unit is not intended to be used as a replacement vehicle battery.
• DO NOT attempt to operate a vehicle that does not have a battery installed.
• Use only the jumper cables provided with this unit. MotoMaster is not responsible for user safety or damage when using accessories not approved by MotoMaster.
• The cable clamps connecting the boosting cables to the vehicle's battery terminals must be positive to positive (red clamp to battery "+") and negative to negative (black clamp to battery "-").
• Do not crank the engine for more than 3 seconds at a time. The jump start feature is designed for short term operation only. Operating the jump start feature for more than 3 seconds may cause damage to the unit.
• Allow the battery booster pack to cool down for at least 3 minutes after each boost.
• Always turn the unit off when not in use.
• DO NOT use the unit to jump start a vehicle while charging the internal battery.
• Charge only at ambient temperatures between 0°C and 60°C (32°F and 140°F).
• DO NOT charge the unit through the 12V DC charging port if your vehicle's electrical system operates above 15V. This may lead to accumulation of hydrogen, causing exposure to fire and explosion hazards.
• Ensure that there are no USB devices connected to the battery booster pack while the unit is being recharged.
• DO NOT insert foreign objects into either USB port.
• This unit is not for use by children and should only be operated by adults.
• Store in a cool, dry place. DO NOT store in locations where the temperature may exceed 70°C (158°F).
• If this unit is leaking liquid, dispose of at a proper recycle facility immediately. Product contains lithium-based battery. Dispose of product according to local regulation at end of product life.

⚠️ WARNING! RISK OF ELECTRIC SHOCK

• DO NOT expose product to rain, snow or use in damp conditions. NEVER submerge unit in water. Product is an electrical device that can produce shock and cause injury if used in wet environments.
• DO NOT operate the unit if it has received a sharp blow, been dropped or otherwise damaged in any way.
• DO NOT disassemble the unit; unit should only be serviced by a qualified technician. Refer to the warranty section of this manual for instructions on obtaining service. Attempting to service the unit yourself may result in a risk of electrical shock or fire and will void the warranty.

⚠️ WARNING! EXPLOSION HAZARD

• DO NOT operate unit near the presence of flammable/combustible liquids or gases.
• DO NOT expose unit in extreme heat, fire or incinerate.
• NEVER attempt to jump start a frozen battery.
• NEVER allow the red and black clamps to touch each other or a common piece of metal.
• The battery booster pack contains components that tend to produce arcs or sparks. Batteries generate hydrogen gas during normal operation which can be ignited by sparks from electrical connections. To prevent the risk of fire or an explosion, always operate in a well-ventilated area and follow all safety information instructions. Always ensure someone is nearby to help you in an emergency.

⚠️ WARNING! RISK OF INJURY

• Always wear eye protection when working with batteries. Batteries can explode and cause flying debris.
• If battery acid comes into contact with eyes, flush affected area with running water immediately for at least 15 minutes and seek medical attention immediately.
• If battery acid comes into contact with skin, rinse immediately with water and wash thoroughly with soap and water. If redness, pain or irritation occurs, seek medical attention immediately.
• Be sure to remove all metal items (watches, necklaces, rings, etc.) before using the jump start system.

Key Parts List

The unit features the following components:

• 1. Main Power Button: Used to turn the unit on/off and activate functions.
• 2. Internal Battery Level LED Indicator: Displays the current charge level of the internal battery.
• 3. Smart Jumper Cables Socket: Located under a protective cover, this is where the jumper cables connect to the unit.
• 4. USB IN port: For charging the jump starter unit itself.
• 5. LED Flashlight: A built-in light for convenience and emergency use.
• 6. USB OUT port (x2): Two ports for charging external electronic devices.
• 7. 12V Car Charger Adaptor: An accessory for charging the unit via a vehicle's 12V DC outlet.
• 8. USB Charge Cable: Cable provided for charging the unit.
• 9. Smart Jumper Cables: The cables with clamps for connecting to a vehicle's battery.

Getting Started

This product comes partially charged and needs to be fully charged prior to use. Carefully read and understand your vehicle owner's manual for specific precautions and recommended methods for jump starting. Ensure you determine the voltage and chemistry of your battery by referring to your battery owner's manual before using this product. This product is for jump starting 12-volt lead-acid batteries only.

Recharging

? IMPORTANT!

Improper charging may result in damage to the unit.

• Ensure that there are no 12V DC appliances connected to the unit while being recharged.
• Do not operate any of this unit's functions while charging is in progress.
• Do not recharge the unit while connected to an external battery.
• Recharge the battery after each use or at least every 6 months when in storage to prolong battery life and keep the unit ready for use.

To recharge the unit:

1. Connect the micro USB cable to the unit's USB IN port.
2. Connect the other end of the micro USB cable to any powered USB power port, such as a laptop, a 12V DC adaptor (included), or an AC charging cube (not included).

Battery Status

Press the ⚙️ button. The Internal Battery Level Indicator LEDs will illuminate to indicate the battery capacity level.

USB Power

? IMPORTANT!

Make sure there are no devices plugged into the USB power port when the unit is being recharged or stored.

The unit is equipped with a USB port providing Quick Charge 5V, 2.4A / 9V, 2A / 12V, 1.5A power output. This port is ideal for charging portable electronic devices such as smartphones, tablets, and more.

1. Connect device(s) to the USB OUT port(s) using a USB cable.
2. Press ⚙️ to turn the unit on and activate USB power.

Jump Starting

⚠️ WARNING! EQUIPMENT DAMAGE

• Do not crank the engine for more than 3 seconds at a time. The jump start feature is designed for short-term operation only. Operating the jump start feature for more than 3 seconds may cause damage to the unit.
• If the engine does not start, wait at least 30 seconds between attempts.
• Do not attempt more than 5 consecutive jump starts within a 15-minute period. Allow the product to rest for 15 minutes before attempting to jump start the vehicle again.
• Risk of shock, fire, combustion, and burns: do not disassemble, modify, crush, heat above 60°C (140°F), or incinerate.
• Do not attempt to jump start an engine if the battery level is at 50% or less. Doing so lowers the chance of successfully boosting your vehicle.
• Do not place the unit where it could fall when the vehicle starts up.
• Make sure that cables are routed away from the motor fan or belts.
• For 12V vehicles only.

Warning! Instructions are for negative ground systems only (most common for vehicles today). If your vehicle is a positive ground system, reverse steps 2 and 3. Please consult your vehicle's manual to confirm your vehicle's ground system.

1. Connect the Smart Jumper Cables to the unit.
2. Connect the red clamp to the POS (+) terminal of the vehicle battery.
3. Connect the black clamp to the NEG (-) terminal of the vehicle battery.
4. Press ⚙️ to turn the unit on. If the unit's charge level is less than 75%, recharge the unit before attempting a jump start.
5. Check LEDs on Smart Jumper Cables, and proceed accordingly:

IMPORTANT INFORMATION

This unit has an OVERRIDE feature, which allows you to force 'ON' the jump start function to allow you to boost 12V batteries down to 0 Volts. There are two cases where you may be required to use this mode:

• Low Battery Voltage (1.8V - 3V)
• No Connection Detected (after ensuring correct polarity and clean connections)

To use the OVERRIDE feature:

1. Press the OVERRIDE button.
2. Once the LED is solid green, proceed with jump start attempt within 30 seconds.

Note: The OVERRIDE mode will only be active for 30 seconds. Once 30 seconds has passed, the unit will reset.

CAUTION!

USE THE OVERRIDE MODE WITH EXTREME CARE.

• This mode is for 12-volt lead-acid batteries only.
• Both the spark-proof and reverse polarity protection features are disabled. Pay very close attention to the polarity of the battery before using this mode.
• DO NOT allow the positive and negative battery clamps to touch or connect to each other, as the product will generate sparks.
• This mode uses very high current (up to 600 Amps) that can cause sparks and high heat if not used properly.
• If you are unsure about using this mode, do not attempt and seek professional help.

LED Flashlight

This unit has a built-in multi-mode LED flashlight for convenience and emergency use. Hold the button for 3 seconds to activate the LED flashlight. Keep pressing the button to cycle through the 4 options:

100% ➡️ Strobe ➡️ SOS ➡️ Off

Auto Shut-Off Feature

This jump starter has a built-in energy-saving feature that will automatically shut off the unit after 30 seconds if no load is detected.

Troubleshooting

Environmental Protection

Do not dispose of this product in the usual household garbage at the end of its life cycle; hand it over at a collection point for the recycling of electrical and electronic appliances. The symbols on the product, the instructions for use or the packing will inform about the methods for disposal.

This product is recyclable. By recycling, material recycling or other forms of reutilization of old appliances, you are making an important contribution toward protecting our environment.

Made in China. Imported by MotoMaster Canada, Toronto, Canada M4S 2B8.

Warranty

This MotoMaster product carries a one (1) year warranty against defects in workmanship and materials. This product is not guaranteed against wear, breakage or misuse. Should this product become defective within the stated warranty period, return it to the store with proof of purchase, and it will be replaced or repaired free of charge.

Note: If the troubleshooting solutions do not eliminate the problem, contact 1-888-942-6686 for assistance.

Technical Specifications