Samsung Auto Rotating Wall Mount VG-ARAB22WMTXC Installation Guide

Parts List and Dimensions

The following components are included for installation:

• Component A: Wall Mount Bracket
• Component B: TV Bracket
• Component D: Screws (M8xL14) x 4
• Component E: Screws (M4xL14) x 8
• Component F: Screws (M4xL10) x 4
• Component G: Screws (M4xL14) x 6
• Component H: Screws (M4xL10) x 4
• Component K: Wall Anchors x 4
• Component L: Cable Management Clips x 10
• Component M: Remote Control Holder
• Component N: Screws (M4xL10) x 4
• Component P: Wall Mount Screws (M8xL28) x 4
• Component Q: Support Brackets x 2
• Component R: Support Brackets x 2
• Component S: Support Brackets x 5

Dimensional information is provided for different TV models, including:

• Model LS03B: Various dimensions provided in mm (inches)
• Model QN90B: Various dimensions provided in mm (inches)
• Model QN85B: Various dimensions provided in mm (inches)

Note on Installation Types:

• Type A: Standard installation. If used, the minimum distance from the wall increases by 5 mm.
• Type B: Can be used if the wall is made of strong material (e.g., concrete or bricks).

General Installation Requirements

• Install the TV on a stable wall made of strong material (e.g., concrete or bricks).
• Organize cables before use to prevent interference with the TV during rotation.
• When securing cables to the wall with molding or other material after installation, ensure the material thickness does not exceed 11 mm. For QN85/90B models, the material thickness should not exceed 18 mm.
• When installing moldings, place the screen in landscape mode and install moldings at intervals of at least 10 mm to avoid interference during TV rotation.

Specific Installation Notes

For QN85/90B Models:

• Type A Installation Required: These models must be installed using Type A.
• Wall Reinforcement Bracket: A wall reinforcement bracket is used, increasing wall thickness by 5 mm. Examples include gypsum board and drywall.
• Type B Installation Restriction: If Type B is used for QN85/90B models, rotation is not possible. A wall reinforcement bracket is not used in this case, and wall thickness does not increase.

General Mounting Precautions:

• Ensure to fix the two holes marked with a specific symbol [circle with a dot].
• If necessary, fix other holes based on the installation environment.
• When mounting on concrete or brick walls, use appropriate anchors (e.g., 8 mm diameter, 65 mm length).
• When mounting on drywall, ensure the wall is reinforced or use appropriate mounting techniques.

Safety and Handling

• To detach the TV from the wall mount, disconnect the cable first.
• Place the TV horizontally and ensure at least two people lift the TV simultaneously.
• If unsure about your wall surface, seek expert assistance.