Samsung Auto-Rotating Wall Mount Installation Guide
Parts List and Dimensions
The following components are included for installation:
- A: Wall Mount Bracket (x1)
- B: Rotating Bracket (x1)
- C: Extension Bracket (x2)
- D: Cable Holder (x1)
- E: Cable Holder Screw (x4)
- F: Wall Mount Screw (M8xL14) (x4)
- H: Wall Mount Screw (M4xL14) (x8)
- J: Wall Mount Screw (M4xL10) (x4)
- K: Wall Mount Screw (M4xL14) (x4)
- L: Wall Mount Screw (M4xL10) (x2)
- M: Wall Mount Screw (M4xL10) (x2)
- N: Wall Mount Screw (M4xL10) (x2)
- P: Wall Mount Screw (M4xL10) (x2)
- Q: Wall Mount Screw (M4xL10) (x2)
- R: Wall Mount Screw (M4xL10) (x2)
- S: Wall Mount Screw (M4xL10) (x2)
- T: Wall Mount Screw (M4xL10) (x2)
- U: Wall Mount Screw (M4xL10) (x2)
Model Compatibility and Dimensions:
| Model | X | Y | Y1 | Y2 |
|---|---|---|---|---|
| QN900B | 138 mm (5.5″) | 349.6 mm (13.7″) | 324.6 mm (12.8″) | 335.6 mm (13.2″) |
| QN800B | 163 mm (6.5″) | 453.7 mm (17.8″) | 383.1 mm (15.1″) | 394.1 mm (15.5″) |
| QN700B | 163 mm (6.5″) | 465.5 mm (18.3″) | 392.7 mm (15.5″) | 403.7 mm (15.9″) |
| QN95B | 138 mm (5.5″) | 327±20 mm (12.9±1″) | 243±20 mm (9.6±1″) | 384±20 mm (15.2±1″) |
| LS03B | 163 mm (6.5″) | 311±20 mm (12.3±1″) | 391±20 mm (15.4±1″) | 453.7 mm (17.8″) |
Mounting Hole Dimensions:
- Width: 525 mm (20.7 inch)
- Height: 131 mm (5.2 inch)
- Depth: 51 mm (2.0 inch)
- VESA Compatibility: 400 x 300 mm
Installation Instructions
Two installation types are provided: Type A and Type B.
Type A Installation
- Attach bracket components as shown in the diagrams. Ensure to use the correct screws for each step.
- Secure the wall mount to the wall using appropriate screws (F, H, J, K, L, M, N, P, Q, R, S, T, U).
- Attach the rotating bracket and other components as indicated.
- Ensure at least two holes marked with a ? symbol are securely fastened. If necessary, fasten additional holes based on the installation environment.
- Organize cables to prevent interference during TV rotation.
Type B Installation
- Attach bracket components as shown in the diagrams. Ensure to use the correct screws for each step.
- Secure the wall mount to the wall using appropriate screws (F, H, J, K, L, M, N, P, Q, R, S, T, U).
- Attach the rotating bracket and other components as indicated.
- Ensure at least two holes marked with a ? symbol are securely fastened. If necessary, fasten additional holes based on the installation environment.
- Organize cables to prevent interference during TV rotation.
Important Notes:
- Type A is recommended for most wall types. Type B can be used for strong walls (concrete, brick).
- Using Type A may increase the distance from the wall by 5 mm.
- If unsure about your wall type, consult a professional.
- To detach the TV, disconnect cables first. Ensure at least two people lift the TV horizontally.
- Refer to the separate document for 'Standard Installation Requirements by Wall Type'.
- When securing cables to the wall with molding, ensure the molding thickness does not exceed 11 mm.
- Install moldings at least 10 mm apart in landscape mode to avoid interference with TV rotation.
Wall Type Considerations
For Concrete, Brick Walls:
- Use screws R (M4xL10) and ensure a minimum distance of 3 mm (1/8″) from the wall.
- Secure at least two holes marked with ?.
For Dry Wall / Gypsum Board:
- With Wall Reinforcement Bracket: The wall thickness increases by 5 mm.
- Without Wall Reinforcement Bracket: The wall thickness does not increase.
- Use screws R (M4xL10) and ensure a minimum distance of 8 mm (5/16″) from the wall.
- Secure at least two holes marked with ?.
Cable Management
Before use, organize cables to prevent them from interfering with the TV during rotation. After installing the TV, when fixing cables to the wall with molding or other materials, ensure the material thickness does not exceed 11 mm. For moldings, install them at least 10 mm apart in landscape mode to avoid interference.
