Introduction
This document provides a comprehensive manual for updating the firmware of your Thrustmaster TS-XW RACER racing wheel. Following these instructions will help ensure your device operates with the latest features and improvements. The process is detailed for various Windows operating systems, including Windows 7, 8, 8.1, and 10.
Prerequisites
Before beginning the firmware update, ensure you have downloaded the latest drivers from the official Thrustmaster support website. It is recommended to connect the TS-XW RACER wheel directly to a USB port on your computer, avoiding the use of USB hubs. During the update, refrain from clicking on any dialog boxes that may appear.
Update Procedure
The guide outlines the steps for restarting your computer and accessing the Thrustmaster Control Panel. Depending on your Windows version, the method for accessing the Control Panel may vary. The document illustrates how to verify that your wheel is recognized and displays the current firmware version. If the firmware is outdated, the guide details how to initiate the update process through the dedicated firmware update application.
The update progress will be displayed on screen. During the update, the MODE LED on the wheel will be off, which is normal. Upon successful completion, the wheel will recalibrate, and the MODE LED will return to its original state. If the update fails, contact Thrustmaster technical support for assistance.
Support and Resources
For further assistance or to download the latest drivers and software, please visit the Thrustmaster support website: Thrustmaster Support.
