How can I verify the T300 RS / T300 Ferrari GTE is correctly installed on my computer?
Initial Setup Check
First, ensure the USB selector switch on the T300 RS base is set to PS3. (Note: PS4 compatibility may vary depending on the specific model and driver version).
Once connected and installed using the latest driver, the wheel should normally be enumerated under Windows Device Manager.
To access Device Manager, you can use the following guides:
Device Manager: Human Interface Device Verification
In Device Manager, navigate to 'Human Interface Devices'. The following components should be present:
For T300 RS / T300 Ferrari GTE / F1 (Standard):
- HID-compliant game controller
- Thrustmaster T300RS Racing wheel (USB)
- USB Input Device (may appear multiple times)
For Ferrari F1 (Advanced):
- HID-compliant game controller
- Ferrari F1 Wheel Advanced T300 (USB)
- USB Input Device (may appear multiple times)
Other common device categories like DVD/CD-ROM drives, Firmware, IDE ATA/ATAPI controllers, Keyboards, and Mice and other pointing devices should also be visible.
Windows Game Controller Verification
The wheel will also become available in the Windows Game Controller settings. Access this by navigating through the Start Menu:
Start > All Programs > Thrustmaster > FFB Racing wheel > Control Panel.
The "Game Controllers" window will display a list of installed game controllers. Your Thrustmaster wheel (e.g., "Thrustmaster T300RS Racing wheel" or "Ferrari F1 Wheel Advanced T300") should be listed with a "Status" of "OK".
Control Panel Configuration
To access the dedicated control panel for detailed configuration, click on the "Properties" button within the Game Controllers window.
The Thrustmaster Control Panel offers several tabs for adjustment:
Wheel Settings:
- Wheel Type Selection: Choose from options like GT Wheel, PS Wheel, FERRARI 458 Challenge Wheel, or FERRARI F1 Wheel.
- Rotation/Angle: Adjust the rotation range, with common presets like 40°, 900°, and 1080°.
- Axis: Typically set to 50.0%.
- Point of View hat-switch: Configuration for the hat switch.
Pedals Settings:
- Axis Configuration: Adjustments for Y Axis and RZ Axis.
- Mode: Select between "Separate (Default)" or "Combined" modes for pedal inputs.
- Inputs: Clutch, Brake, Gas.
Buttons Settings:
- View and manage all buttons on the wheel.
- Mode: Switch between "Normal Mode (Default)" and "Advanced Mode" for button assignments.
The panel also includes a "Check for Update" button and standard "OK", "Cancel", and "Apply" buttons for saving changes.
Product Information
The top right corner of the Control Panel displays important information about your wheel and the currently installed drivers. Keep this information handy for technical support:
- Package: e.g., 7.TTRS.2017
- Firmware: e.g., 28.00
- S/N (Serial Number): e.g., 532T1468010002
(Note: The displayed information is given as a reference and may not reflect the current state of your specific wheel.)
