Yealink Touch Panel MTouch II

Package Contents

• MTouch II
• 7.5m Ethernet Cable
• USB Type-C Cable (with an HDMI adapter)
• Mounting Bracket and Accessories
• Screwdriver
• Quick Start Guide

MTouch II Connection

Connect your MTouch II

The MTouch II connects to your system for interaction. It can be linked to a PC for wired content sharing via USB-C, or to the MCore via the VCH port. A CP900 audio device can be connected via a USB-A port. The WPP20 wireless presentation pod can be paired using another USB-A port.

Diagram Description: Shows MTouch II connected to a PC (HDMI/USB-C Wired Presentation), CP900, and WPP20. The MCore is connected via VCH.

Assemble your MTouch II

Follow these steps to assemble the MTouch II:

1. Place the MTouch II on its integrated stand.
2. Attach the mounting bracket components.
3. Connect necessary cables (e.g., VCH, USB).
4. Secure the stand mechanism.
5. Complete the assembly by attaching the main unit to the stand.

Diagram Description: Illustrates a 5-step assembly process for the MTouch II, showing the device being placed on a stand, bracket attachment, cable connection, and final assembly.

MTouch II Installation

Put on a table

Place the MTouch II on a conference room table. The touch screen angle can be adjusted to your preference, typically between 28° and 50° for optimal viewing.

Diagram Description: Shows the MTouch II placed on a table with adjustable angles indicated as 28° and 50°.

Mount on a Wall

Wall mounting involves attaching a bracket to the wall and then mounting the MTouch II onto the bracket. Ensure proper alignment and secure the device. The process includes drilling holes, inserting anchors, attaching the bracket to the wall, and then attaching the MTouch II to the bracket.

Diagram Description: Illustrates a 6-step wall mounting process, showing drilling, anchor insertion, bracket attachment to the wall, and finally mounting the MTouch II onto the bracket. A 100mm measurement is indicated for wall mounting hole spacing.

If the conference room environment allows, the MTouch II can also be routed through the wall for a cleaner setup.

Hardware Interface Instructions

The MTouch II features several ports for connectivity:

Wireless Presentation

You can use the Yealink WPP20 wireless presentation pod for wireless content sharing.

Procedure

1. Connect the WPP20 to the MTouch II's USB port.
2. Wait approximately 3 seconds for the WPP20 LED indicator to turn solid green, indicating successful pairing.
3. Connect the WPP20 to your PC.
4. For first-time connection to a computer, manually launch the Yealink Wireless Presentation Pod software from 'This PC' (Windows 10) or 'My Computer' (Windows 7) to upgrade the WPP20 firmware if prompted. Follow on-screen instructions for firmware updates. For older WPP20 versions, navigate to 'Version Update' within the software.
5. After successful upgrade, the WPP20 is ready for content sharing.

For the latest firmware, visit Yealink's website: http://support.yealink.com/.

LED Indicator Instructions

Working Status LED Indicator

Wi-Fi AP LED Indicator

Regulatory Notices

Operating Ambient Temperatures

Operating temperature: +32 to 104°F (0 to 40°C). Relative humidity: 5% to 90%, non-condensing. Storage temperature: -22 to +160°F (-30 to +70°C).

Warranty

Yealink's product warranty is limited to the unit itself when used normally. Yealink is not liable for damages or claims arising from misuse or third-party issues.

Explanation of Symbols

• DC symbol: ⚡ Indicates DC voltage.
• WEEE Warning symbol: ♻️ Indicates proper disposal of electronic waste to protect the environment and human health. Do not dispose of WEEE as unsorted municipal waste.

Restriction of Hazardous Substances Directive (RoHS)

This device complies with EU RoHS Directive requirements. Compliance statements can be obtained by contacting support@yealink.com.

Safety Instructions

Read and follow all safety instructions before installation and use. Keep the device dry, clean, and avoid collision. Do not attempt self-repair; contact an authorized service center. Respect all relevant laws and statutes.

Environmental Requirements

Place the device in a well-ventilated area, away from direct sunlight, dust, inflammable materials, heat sources, or open flames. Keep the device dry.

Operating Requirements

Supervise children when using the device. Use only manufacturer-provided or authorized accessories. Ensure the power supply meets the device's input voltage requirements and use surge protection. Keep hands dry when connecting/disconnecting cables. Avoid contact with liquids and water. Disconnect during thunderstorms. Unplug the power plug if the device is left unused for extended periods or if abnormal conditions (smoke, noise, smell) occur. Do not insert foreign objects into slots. Connect the grounding cable first when connecting cables.

Cleaning Requirements

Disconnect from power before cleaning. Use a soft, dry, anti-static cloth. Keep the power plug clean and dry.

Troubleshooting

No Power: Check plug connection, try a different outlet. Ensure the device is within operating temperature range. Verify cable connections. Use the correct power supply and ensure the correct Yealink device is connected. Clean ports if dusty.

FCC Statement

This device complies with FCC Part 15. Operation is subject to two conditions: no harmful interference and acceptance of any received interference. Unauthorized modifications may void the user's authority to operate.

IC Statement

This device complies with Industry Canada's licence-exempt RSSs. Operation is subject to two conditions: no interference and acceptance of any interference. (CAN ICES-3(B))

Contact Information

YEALINK NETWORK TECHNOLOGY CO.,LTD.
309, 3rd Floor, No.16, Yun Ding North Road, Huli District, Xiamen City, Fujian, P.R. China

YEALINK (EUROPE) NETWORK TECHNOLOGY B.V.
Strawinskylaan 3127, Atrium Building, 8th floor, 1077ZX Amsterdam, The Netherlands

YEALINK (USA) NETWORK TECHNOLOGY CO., LTD.
999 Peachtree Street Suite 2300, Fulton, Atlanta, GA, 30309, USA

Made in China

About Yealink

Yealink is a global leader in enterprise communication and collaboration solutions, specializing in video conferencing. With expertise in cloud computing, audio, video, and image processing, Yealink offers comprehensive collaboration solutions. It ranks No.1 in global market share for SIP phones.

Technical Support

For the latest firmware, guides, FAQs, and product documents, visit Yealink WIKI at http://support.yealink.com/. For technical assistance, use the Yealink Ticketing system at https://ticket.yealink.com/.

Web: www.yealink.com

Copyright © 2020 YEALINK(XIAMEN) NETWORK TECHNOLOGY CO.,LTD. All rights reserved.