GEEKOM Mini PC

Introduction

This document provides essential information for the GEEKOM Mini PC XT Series, specifically the XT12 Pro and XT13 Pro models. It guides users through the setup, installation of internal components, mounting options, and basic operation.

Ports and Connectivity

The GEEKOM Mini PC XT Series offers a range of ports for versatile connectivity:

Front Panel:

• USB 3.2 Gen2 Ports (some with Power Delivery - PD)
• 3.5mm Speaker/Headset Jack
• Power Button with LED indicator

Rear Panel:

• USB 3.2 Gen2 Ports (some with Power Delivery - PD)
• HDMI Ports
• 2.5 Gigabit Ethernet Port
• DC Power Input

Installation and Assembly

Follow these steps to install or upgrade components and set up your Mini PC.

Step 1: Accessing the Interior (Top Cover Removal/Reattachment)

Diagram shows the top chassis cover being lifted off the main unit. A crossed-out drill icon ??️ indicates that power tools should not be used. A screw icon ? is shown, representing a fastener. Ensure the cover is securely reattached after any internal work.

Step 2: Installing an M.2 SSD

Diagram illustrates the installation of an 80mm M.2 SSD. The SSD is shown being inserted into a slot and secured with a screw ?. A small cylindrical standoff is also depicted.

Step 3: Installing DDR4 RAM

Diagram shows two DDR4 RAM modules being installed into slots on the motherboard. Arrows indicate the modules being pushed down until clips secure them.

Step 4: VESA Mounting

Diagrams illustrate mounting the Mini PC to a monitor using a VESA bracket. This involves attaching the bracket to the monitor and then attaching the PC to the bracket.

Step 5: Connecting Power

Diagram shows the AC power adapter being connected to the PC and plugged into a wall outlet.

Safety and Caution Information

Please observe the following safety guidelines:

• ⚠️ AC Power Adapter: Use only the provided AC adapter. Using unauthorized adapters may cause electric shock, fire, or burns. Operate in dry, indoor environments. Do not attempt to repair the unit yourself; consult a professional. The adapter is designed for 0°C to 35°C (32°F - 95°F). Connect only to properly wired and grounded outlets.
• ⚠️ Battery Replacement: Replacing batteries with incorrect types can cause explosion hazards. Recycle or dispose of used batteries according to local environmental regulations.
• ⚠️ Adapter Usage: Failure to use the included power adapter may violate compliance requirements and pose a safety risk.
• ⚠️ Temperature: This device is designed for ambient temperatures between 0°C and 35°C (32°F - 95°F). Avoid use or storage near heat sources, direct sunlight, or outside the specified temperature range.
• ⚠️ Medical Devices: This device may interfere with pacemakers, hearing aids, or other medical devices. Maintain a minimum distance of 20 cm (8 inches) between the Mini PC and medical devices to reduce interference risk. Consult the medical device's manual for more information.
• ⚠️ Modifications: Unauthorized modifications to wireless solutions, thermal systems, components, or the chassis violate compliance requirements and can create safety hazards.

FCC Compliance

FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

This device complies with Part 15 of the FCC Rules. Operation is subject to two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body.

Connect to a Network

To connect to a network:

1. Click the network icon ? in the notification area in Windows. A list of available wireless networks will be shown.
2. Select the desired network and input the information (if needed).

Note: When connecting to a secured wireless network, enter your Wi-Fi password when prompted.

Customer Support

For assistance, please contact:

Email: support@geekompc.com

Website: www.geekompc.com