GEEKOM XT Series Mini PC
Model: XT12 Pro, XT13 Pro
Product Overview
This document provides essential information for the GEEKOM XT Series Mini PC, including model XT12 Pro and XT13 Pro. It covers port identification, installation of internal components like M.2 SSD and DDR4 memory, safety guidelines, and network connectivity.
Port Identification
The GEEKOM Mini PC features various ports for connectivity. Descriptions are provided in multiple languages, with English translations listed below:
| Port Type | Description |
|---|---|
| USB 3.2 Gen 2 Port | High-speed data transfer port. |
| USB 3.2 Gen 2+PD Port | High-speed data transfer with Power Delivery support. |
| HDMI Port | High-Definition Multimedia Interface for video and audio output. |
| USB4+DP Port | Supports USB4 and DisplayPort functionality. |
| Ethernet Port (2.5G) | For wired network connectivity. |
| Power Button/LED | Controls power and indicates status. |
| Electric Power Inlet | Connects to the AC power adapter. |
| Speaker/Headset Port | For audio output and microphone input. |
Installation Guide
Follow these steps to install or upgrade components in your GEEKOM Mini PC.
Step 1: Opening the Mini PC Case
To access the internal components, the top cover of the Mini PC needs to be removed. This typically involves loosening screws or releasing clips, indicated by a circular arrow [A] for unscrewing or releasing. Then, lift the top cover upwards [B] to detach it from the main chassis.
Step 2: Installing M.2 SSD
This section details the installation of an 80mm M.2 Solid State Drive (SSD). The process involves inserting the SSD into the M.2 slot at an angle, then securing it with a screw, possibly with a small stand-off or bracket, indicated by a circular arrow [A] for fastening.
Step 3: Installing 1.1V DDR4 Memory
This step describes the installation of DDR4 RAM modules. The diagram shows two RAM modules being inserted into their respective slots. The clips on the sides of the RAM slots need to be opened, the RAM module inserted at an angle, and then pushed down until the clips secure it, indicated by arrows showing insertion and downward pressure.
Step 4: Closing the Mini PC Case
After installing components, reattach the top cover. Ensure it aligns correctly with the chassis and secure it by reversing the opening procedure (e.g., screwing it back in).
Step 5: VESA Mounting (Optional)
The Mini PC can be mounted to the back of a monitor using a VESA mount. The diagram shows a bracket being attached to the monitor's VESA mounting points, and then the Mini PC being attached to this bracket. This typically involves aligning screw holes and securing the unit, indicated by a circular arrow [A] for fastening.
Step 6: Connecting Power
Connect the provided AC power adapter to the power inlet port on the Mini PC and plug the adapter into a grounded electrical outlet.
Safety and Caution Information
Please read the following safety guidelines carefully to ensure safe operation of your GEEKOM Mini PC.
- AC Power Adapter: Use only the provided AC adapter. Using unauthorized adapters may pose risks of electric shock, fire, or burns. Operate the adapter only in dry, indoor environments. Do not open the adapter. Connect only to properly wired and grounded outlets. The adapter is designed for use between 0°C and 35°C (32°F - 95°F).
- Battery Safety: Incorrect battery replacement can lead to explosion hazards. Recycle batteries whenever possible and dispose of used batteries according to local environmental regulations.
- Compliance: Failure to use the supplied power adapter may violate regulatory requirements and endanger the user.
- Temperature: This device is designed for use in ambient temperatures between 0°C and 35°C (32°F - 95°F). Avoid operating or storing the device near heat sources, in direct sunlight, or outside the specified temperature range.
- Medical Devices: This device may interfere with the operation of certain medical devices such as pacemakers or hearing aids. Maintain a distance of at least 20 cm (8 inches) between the Mini PC and any medical device to minimize potential risks. Consult the medical device manufacturer for specific information.
- Modifications: Unauthorized modifications to the wireless solution, thermal solution, device components, or casing may violate regulatory requirements and create safety hazards.
FCC Compliance and Network Connection
FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with Part 15 of the FCC Rules.
FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits for an uncontrolled environment. It should be installed and operated with a minimum distance of 20cm between the radiator and your body.
Connect to a Network:
- Click the network icon in the Windows notification area to see a list of available wireless networks.
- Select your desired network and input the necessary information (e.g., Wi-Fi password for secured networks).
Customer Support
For assistance, please contact GEEKOM customer support:
Email: support@geekompc.com
Website: www.geekompc.com
