ZEALOT S32 Pro Wireless Speaker

Packing Content

The package includes:

• ZEALOT S32 Pro Wireless Speaker
• USB-C Charging Cable
• User Manual

Power On

To power on/off the speaker, press and hold the power button for more than 2 seconds.

Wireless Connection

1. Turn on the speaker. The indicator light will flash, indicating it is in pairing mode.
2. Enable Bluetooth on your device (e.g., smartphone, tablet) and search for "ZEALOT-S32 Pro".
3. Select "ZEALOT-S32 Pro" to connect. Once connected, the indicator light will become solid.

Mode Switch

Double-press the power button to cycle through different playback modes: Wireless (Bluetooth), TF Card, USB Drive, and AUX input.

Play Control

Calling Functions

• Answer/End Call: Press the Play/Pause button once.
• Reject Call: Press and hold the Play/Pause button for more than 2 seconds.

Music Playback

• Play/Pause: Press the Play/Pause button once.
• Next Track: Press and hold the "+" button for more than 2 seconds.
• Previous Track: Press and hold the "-" button for more than 2 seconds.
• Volume Up: Press the "+" button once.
• Volume Down: Press the "-" button once.

Light Mode

To switch light effects or turn the light on/off, press and hold the light button for more than 2 seconds.

PartyAdd (True Wireless Stereo - TWS)

To connect two ZEALOT S32 Pro speakers for True Wireless Stereo (TWS) sound (indicated by a linking chain symbol):

1. Turn on both S32 Pro speakers.
2. On one of the speakers, press the PartyAdd button. The speakers will automatically connect to each other.

Charge

Connect the provided USB-C cable to the speaker's charging port and the other end to a DC 5V power source (e.g., USB wall adapter, computer USB port). The charging indicator will show the charging status.

Warnings and Safety Information

• To ensure correct use and trouble-free operation, please read this user manual carefully first.
• For the first use, it is recommended to fully charge the device.
• Use and store the product at room temperature.
• Do not expose the product to fire, high temperatures, or direct sunlight.
• Maintain a moderate speaker volume to avoid temporary or permanent hearing impairment.
• Do not use organic solvents or other chemicals to clean the product.
• Do not allow small particles to enter the product.
• Do not disassemble the product or make any modifications to its structure or any part thereof.
• If the battery is not replaced correctly, there will be an explosion accident; only the same type of battery can be replaced.
• The battery (battery pack) must not be exposed to direct sunlight, fire, or similar overheating conditions.
• Do not throw or drop the product to avoid damage.
• Keep the product out of reach of children.

Technical Specifications

Hazardous Substances Content

In accordance with China's electronic information product pollution control methods, the following table indicates the presence of hazardous substances in product parts:

Notes:

1. "O" indicates that the concentration of the hazardous substance in all homogeneous materials of this part is below the limit requirements of SJ/T11363-2006 standard.
2. "X" indicates that the concentration of the hazardous substance in at least one homogeneous material of this part exceeds the limit requirements of SJ/T11363-2008 standard.
3. The "X" marked parts comply with the RoHS Directive (2002/95/EC) set by the European Union Parliament for the restriction of hazardous substances in electronic/electrical products.

The environmental protection usage period for this electronic information product, under the conditions described in this manual, is 10 years. During this period, the toxic and hazardous substances or elements will not leak out, causing pollution to the environment or severe harm to human health and property.

FCC Warning

This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Radiation Exposure Statement

The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.

Compliance and Certifications

Consumers who use a power adapter for charging should purchase a matching set of CCC certification and meet the required power adapter standards.

The product bears the CE, FCC, and RoHS marks, indicating compliance with relevant European and international standards. Made in China.