ZEALOT-S32 Pro Wireless Speaker
Quick Start Guide
Packing Content
- ZEALOT-S32 Pro Wireless Speaker
- USB-C Cable
- Quick Start Guide
Key Features and Operation
Power On/Off
Press and hold the power button to turn the device on or off. The indicator light will flash.
Mode Switch
Press the mode button to switch between different audio modes.
Play Control
Use the playback controls to manage your music.
Light Control
Control the speaker's lighting effects, including turning them on/off or switching modes.
Wireless Connection
Turn on the speaker and your device's Bluetooth. Search for "ZEALOT-S32 Pro" and connect.
Party Add
Connect multiple ZEALOT-S32 Pro speakers together for an enhanced audio experience.
Charging
Connect the included [USB-C] cable to the speaker and a power source to charge the device.
Important Safety Warnings
- Read this user manual carefully before use for correct operation.
- It is recommended to fully charge the device for the first use.
- Use and store the product at room temperature.
- Do not expose the product to fire, high temperatures, or direct sunlight.
- Maintain moderate speaker volume to avoid temporary or permanent hearing impairment.
- Do not use organic solvents or other chemicals to clean the product.
- Prevent small particles from entering the product.
- Do not disassemble or modify the product's structure or any part thereof.
- Battery Safety: If the battery is not replaced correctly, there is a risk of explosion. Only replace with the same battery type. Batteries must not be exposed to conditions like sunlight, fire, or similar overheating.
- Do not throw or drop the product to avoid damage.
- Keep the product out of reach of children.
Technical Specifications
| Feature | Specification |
|---|---|
| Wireless Version | 5.2 |
| Charging Voltage | DC 5V |
| Working Voltage | 3.7V |
| Transmission Distance | 10m |
| Frequency Range | 20Hz-20KHz |
| Speaker Size | Φ57mm |
| SNR (Signal-to-Noise Ratio) | ≥85dB |
| Distortion | <1% |
| Weight | 470g |
| Dimensions | 90*93*128mm |
Compliance and Safety Information
China RoHS (Table of Hazardous Substances)
| Part Name | Pb | Hg | Cd | Cr(VI) | PBB | PBDE |
|---|---|---|---|---|---|---|
| Printed Circuit Board | o | o | o | o | o | o |
| Plastic and Polymer Parts | o | o | o | o | o | o |
| Standard Battery | o | o | o | o | o | o |
| User Manual | o | o | o | o | o | o |
Notes:
1. "o" indicates that the content of the hazardous substance in all homogeneous materials of the part is below the limit requirement of SJ/T 11363-2006.
2. "X" indicates that the content of the hazardous substance in at least one homogeneous material of the part exceeds the limit requirement of SJ/T 11363-2008.
3. The parts marked with "X" above comply with RoHS regulations - Directive 2002/95/EC of the European Parliament and of the Council on the restriction of hazardous substances in electrical and electronic equipment.
The period of use for environmental pollution caused by the leakage of toxic and harmful substances or elements contained in this electronic information product, under the conditions of use described in the manual, will not cause serious damage to human health or property is 10 years.
CCC Certification
Consumers using a power adapter for charging should purchase one that has CCC certification and meets the required standards.
FCC Warning
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help.
Radiation Exposure Statement
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.
