Cecotec Ready Warm 10000 Top Ceramic

Product Overview

The Cecotec Ready Warm 10000 Top Ceramic is a mechanical upright ceramic heater designed for efficient heating. This manual provides comprehensive instructions for its use, maintenance, and safety.

Important Usage Note: This product is not suitable for primary heating purposes. It is intended for use in well-insulated spaces or for occasional use.

1. Parts and Components

The heater is comprised of the following parts:

• 1. Power-level knob: Selects heating mode (Off, Fan, Low Power, High Power).
• 2. Thermostat knob: Sets the desired room temperature.
• 3. Air outlet: Expels heated air.
• 4. Indicator light: Illuminates when the unit is operating.
• 5. Handle: For easy portability.
• 6. Air inlet: Draws air into the unit.
• 7. Power switch: Main on/off control.
• 8. Base: Provides stability.
• 9. Oscillation Switch: Activates/deactivates the oscillation function.

Diagram Description: A diagram illustrates the vertical tower-style heater with numbered callouts pointing to the control panel, air vents, handle, and base.

2. Safety Instructions

Read these instructions thoroughly before using the appliance. Keep this manual for future reference.

• Ensure mains voltage matches the rating label and the wall outlet is grounded.
• Regularly inspect the power cord for visible damage. Contact Cecotec Technical Support for repairs to avoid danger.
• Do not place the device directly below a socket-outlet.
• Keep away from heat sources, flammable substances, and wet surfaces. Do not use outdoors.
• Do not insert objects into air inlets or outlets; this may cause electric shock, fire, or damage.
• If the appliance falls into water, unplug immediately and do not touch it.
• Do not immerse the cord, plug, or any part in water or other liquids. Ensure hands are dry before handling.
• Turn off and unplug when not in use or before moving. Pull the plug, not the cord.
• Not intended for use by children under 8 years. Children aged 8+ can use with continuous supervision.
• Persons with reduced capabilities can use if supervised or instructed, understanding the risks.
• Supervise children to ensure they do not play with the appliance.

3. Before Use

1. Remove the product from the box and all packaging materials.
2. Inspect for visible damage. Contact Cecotec Technical Support if damage is found.
3. Place the heater on a flat, stable surface.
4. Set the power-level switch to "0" and plug the cord into an earthed power supply.

4. Operation

Power-Level Knob

• 0: Off
• ~: Fan (cool air)
• I◇: Low-power heating
• II: High-power heating

Diagram Description: A circular dial graphic shows the power control knob with settings from MIN to MAX, including Off (0), Fan (~), Low Power (I◇), and High Power (II). A pointer indicates the selected level.

Thermostat

Turn the thermostat to maximum and select the desired power level. Once the room reaches the desired temperature, turn the thermostat anticlockwise until the heater shuts off. The thermostat will cycle automatically to maintain the selected temperature.

NOTE: The appliance will only turn on when the room temperature falls below the set temperature.

Diagram Description: A circular dial graphic shows the thermostat control knob with settings from MIN to MAX, typically numbered (e.g., 0, 1, 2). A pointer indicates the set temperature level.

Oscillation

The heater includes an oscillation function. Activate by moving the switch upwards; deactivate by moving it downwards. ?

Safety Systems

Tip-Over Protection

The heater automatically shuts off if tipped forward or backward. It will restart automatically when returned to its upright position. ⚠️

Overheat Protection System

The heater has an overheat protection system that automatically shuts it off in case of overheating (e.g., due to blocked air inlet/outlet). If this occurs:

1. Unplug the appliance and wait 30 minutes to cool down.
2. Remove the object obstructing the air inlet or outlet.
3. Switch it on again. The appliance should operate normally.

5. Cleaning and Maintenance

• Turn off, unplug, and allow the appliance to cool before cleaning.
• Do not use abrasive scouring pads, powders, or cleaners.
• Use a soft, damp cloth for the exterior. Be careful not to touch heating elements.
• Dust and fluff accumulation can cause overheating. Regularly vacuum air vents and grilles.
• If storing for a long period, keep in a dry, safe place protected from dust.

6. Technical Specifications

• Model: Ready Warm 10000 Top Ceramic
• Product Reference: 05313
• Power: 2200 W
• Voltage: 220-240 V
• Frequency: 50 Hz
• Made in: China | Designed in Spain

7. Disposal of Old Electrical Appliances

The European directive 2012/19/EU (WEEE) mandates that old electrical appliances must not be disposed of with unsorted municipal waste. They must be collected separately for optimal recovery and recycling of materials, reducing environmental and health impacts. ♻️

The crossed-out wheeled bin symbol ?️ on the product signifies your obligation for correct disposal. If the product contains batteries, they must be removed and disposed of separately.

Contact local authorities or retailers for detailed disposal information.

8. Warranty and SAT

This product has a 2-year warranty from the date of purchase, provided proof of purchase is submitted, the product is in perfect physical condition, and used correctly as per the manual.

The warranty does NOT cover:

• Use outside intended capacity, misuse, impact, exposure to moisture, immersion in corrosive liquids, or any fault attributable to the customer.
• Disassembly, modification, or repair by unauthorized persons.
• Faults due to normal wear and tear.

The warranty covers manufacturing defects for 2 years, except for consumable parts. Misuse voids the warranty.

For any issues or queries, contact Cecotec Technical Support Service at +34 963 210 728.

Technical Data

Information requirements for electric local space heaters.