Cross Net Volleyball Instructions

Product Accessories

• Multi-function net x1
• Short frame rod x16
• Retainer x8
• High strength guide rope x4
• Portable bag x1
• Border line x6
• Volleyball x1
• Pump x1

Product Installation Steps

Step 1: Put 6 boundary lines on the ground, make them form a field-shaped game area.

Diagram Description: A diagram illustrating the layout of the volleyball court. Six boundary lines are shown forming a rectangular playing area on the ground.

Step 2: Take out all the accessories and connect 4 short joints to a height of 2m, make sure that the silver nail is at both sides. As shown in the image below:

Image Description: A close-up view of hands connecting black segmented poles to form upright supports. A small metallic component, referred to as a 'silver nail', is visible, indicating its attachment point.

Step 3: Put one of the connected poles through the net piece, as shown in the image below:

Image Description: A hand is shown guiding a black pole through the sleeve of a yellow volleyball net. The pole is being inserted from the bottom upwards.

Step 4: Tie the guide rope to the pole above the net, as shown in the image below:

Image Description: A black pole, supporting the volleyball net, is shown with a guide rope being securely tied around it, positioned above the net.

Step 5: The other end of the guide rope is connected with the retainer, as shown in the image below. Repeat above steps for other 3 long frame rods.

Image Description: The end of a guide rope is shown anchored to the ground using a stake-like retainer. The text instructs to repeat this process for the remaining three long frame rods.

Step 6: Insert the frame rod into the ground, the position should be at the end of the '+' shape. Do not forget to across the metal ring when you insert the silver nail into ground.

Image Description: Two images depict ground anchoring. The first shows a frame rod being pushed into the ground. The second, a close-up, illustrates a 'silver nail' being inserted through a metal ring on the rod and into the soil.

Step 7: Adjust the rope and then insert the retainer into the ground after tightening the frame rod. Then insert other 4 retainers into the ground at the 4 corners of the rectangle. As shown in the image below.

Image Description: The fully erected volleyball net system is shown, with guide ropes extending from the top of the poles and staked into the ground at the four corners of the court. The net is taut and ready for play.

Step 8: After the above step, you will finish installation. You can make some adjustments when you are not satisfied with your first installation. A perfect installation is shown as image below.

Image Description: A final view of the completed Cross Net Volleyball setup. The net is standing, boundary lines are in place, and guide ropes are secured. A volleyball is visible, suggesting the game is ready to be played.