Fingerprint Intelligent Lock Manual
(Support Tuya Smart)
Ideal for metal grill door, wooden door, home door lock, office door lock, etc.
Functions and Operations
- Unlock information: refers to the input fingerprint, password, or IC card information (including administrators and ordinary users).
- Key "*" : Clear key/back key.
- Key "#": Confirm key/Enter menu function key.
The factory administrator initial password is 123456. Under the initial state, any fingerprint, IC card, or password can open the lock.
Access Door Lock Function Management
Initialization state:
Press "*" then press "#": Voice broadcast: please enter administrator information (enter 123456#).
After operation successfully, voice broadcast: press 1 for administrator settings, press 2 for user settings, press 3 for system settings, press 4 for restore settings.
Administrator Settings
- Add administrator: Press "1". Add administrator press "1", enter administrator information, input fingerprint or password (Fingerprint inputting 4 times, password input 6-8 bit digital twice (888888#), IC card input once.
- Delete administrator information: Press "2". Enter number press # confirm (002#). (Unable to delete all, the first administrator is reserved).
Add a Network
Hotspot connection press "1". Intelligent connection press "2" (TUYA).
Add device ➔ Security & Sensors ➔ Lock (Wi-Fi) ➔ Input network password.
Adding device... No Fast flashing (0.5 second/1 time).
Ordinary User Settings
- Add user information: Press "1" voice prompt: input unlocking information, input fingerprint or password (Fingerprint inputting 4 times, password input 6-8 bit digital twice (888888#), IC card input once. After operation successfully, it's able to input other user information.
- Delete user information: Press "2" voice prompt: press "1" delete user number, press "2" delete all, press "1" input number (010#) delete successfully.
System Settings
Press "3" voice prompt: press "1" voice setting, press "2" unlocking mode, press "3" language setting, press "4" time setting, press "5" change room number.
- Voice setting: Press "1" voice prompt: Turn on voice; press "2" Turn off voice.
- Unlocking mode setting: Press "2" voice prompt: press "1" single unlock mode, press "2" combine unlock mode.
- Language setting: Press "3" voice prompt: press "1" Chinese, press "2" English.
- Time setting: Press "4" voice prompt: Present time is 201903041153, please modify. Please modify based on the format year-month-day, 202004181613, press # confirm.
- Room number modify: Press "5" voice prompt: room number 8888, please modify correct room number (4 bit), press # confirm.
Add/Delete Remote Controller
(Remote control module interface reset button on back panel)
- Add remote controller: Press and hold the remote control module interface reset button on the back panel, release after 5 beeps tone, and now press any button on the remote controller. After 3 beeps tone, the remote controller adding is now successful.
- Delete remote controller: Press and hold the remote control module interface reset button on the back panel, release after 5 beeps tone, and now press any button on the remote controller. After a long beeps tone, the remote controller is successfully removed.
To delete all remote controllers: Press and hold the remote control module interface reset button on the back panel, release after 12 beeps tone, all remote controllers will be deleted.
Restore Factory Setting
(Press and hold around 8s, and hear a beeps tone reset successfully)
Others
- The system will automatically enter the invalid input state if the unauthorized unlocking information is continuously incorrectly input for more than 5 times within 5 minutes, and the invalid input state will last for 90 seconds.
- After the voltage is lower than 4.5v, the lock will automatically alarm every time when it is opened. After the alarm, the lock can be opened for 200 times. After the number of times exceeds, each unlock delay is 5 seconds, new batteries must be replaced before the number of times available.
- Password peeping prevention function: Input password as follows when opening the door with password: XXX password XXX; you can add some extraneous codes before and after the password, and then press # to confirm. The password must be included in the input contents.
- If there is no operation more than 10 seconds, the system will automatically exit.
- Initialization setting: Long press the rear panel initialization button for 5 seconds to initialize. All unlock information and records will be cleared after initialization (Please be careful operation).
Technical Parameters
| Technical Parameters | |
| Working Voltage | 4X AA 5# alkaline batteries (Not include) Or 12V power supply |
| Static current | <50-65μA |
| Administrator | 9 group |
| Unlock ways | Fingerprint, Card, Password, Key (Optional for Tuya app or Remote controller) |
| Working current | >250mA(Strong Drive) |
| Fingerprint Capacity | <=100 |
| Card Capacity | <=100 |
| Password Capacity | <=100 |
| Remote control capacity | <=30 |
| Password | 6-8 bit |
| Virtual password | 16 bit |
| Low voltage alarm | 4.5±0.2V |
| Working Temperature | -10°C~60°C |
| Humidity | 20% ~ 93% |
Interface Specification
Remote control module mounting (Optional)
Tuya Smart module (Optional)
- Magnetic Induction
- Door magnetic interface
- Tuya module connection wire
- Door magnetic interface
- Motor interface
- Remote control module interface
- App module backup interface
- Button for Menu setting
- Fingerprint front & rear panel interface 1/2
Internal Components:
- 5 # battery(4pcs)
- 6V Power supply interface(Battery)
- 12V power supply interface
- Building intercom multi-function interface
- Button for remote controller setting
- Door opening button interface
Note: Wi-fi module or Remote controller module it's optional, provide on request.
Install Diagram
Door thickness: Approx 3CM
Punch position: 3CM, 3CM
Cutting line: Approx 1.8CM
Lock dimensions: 6CM, 3CM
Power Supply: USB Emergency Power supply
