Manuals+

Fronius Smart Meter TS 100A-1 Quick Start Guide

This guide provides essential information for the installation and initial setup of the Fronius Smart Meter TS 100A-1.

Important Safety Information

WARNING! Incorrect operation and incorrectly performed work can cause serious personal injury or material damage. The Fronius Smart Meter may only be installed and commissioned by trained personnel and only within the scope of the technical regulations. Before working with the device, read and understand all enclosed, printed and online documents! This document does not describe all of the possible system configurations.

This warning is also available in German (DE), French (FR), Italian (IT), Spanish (ES), Danish (DA), and Portuguese (PT).

Technical Specifications

Software Requirements
Fronius Datamanager 2.0 ≥ 3.16.1 version
Fronius Symo Hybrid ≥ 1.16.1 version
Measuring Input
Nominal voltage (1-phase) range 230 V (-30% to +20%)
Self-consumption - voltage path (max. voltage) ≤ 8 VA
Nominal frequency 50-60 Hz
Tolerance 45-65 Hz
Nominal current, I 5 A
Maximum current, Imax 100 A
Starting current 40 mA
Short-time overload 301 / 0.001 s max
Self-consumption - current path (max. current) ≤ 1 W
Power factor cosφ 0.5 ind - 0.8 cap
Operating range (EN IEC 62053-21, EN IEC 62053-23) In accordance with EN 62053-21
Current distortion factor In accordance with EN IEC 62052-11, EN 50470-3
Output
RS485 communication (Electrically isolated from measuring input) RS485-3 conductors
Standard 1-255
Addresses 9600, 19200 bit/s
Baud rate ≤ 200 ms
Response time III
Insulation (EN IEC 62052-11, EN IEC 62053-21)
Installation category 2
Degree of pollution 4000 VAC RMS (1 min)
Insulation voltage In accordance with EN IEC 62052-11, EN 50470-3
Electromagnetic Compatibility
Emission test In accordance with EN IEC 62052-11, EN 50470-3
Immunity test In accordance with EN IEC 62052-11, EN 50470-3
Operating Conditions
Reference temperature 25 °C (± 5 °C)
Operating range -25 to +65 °C
Temperature limit for storage and transport -30 to +80 °C
Mechanical environment M2
Electromechanical environment E2
Housing
Housing 2 modules according to DIN 43880
Sealable housing/terminal cover Screw connection
Connection Can be snapped onto 35 mm DIN rail
Mounting Noryl, self-extinguishing
Housing material IP51 housing, IP20 connections
Degree of protection (EN 60529) 160 grams
Weight max. 25 mm²
Terminals - Measuring Input
Wire max. 25 mm²
Recommended torque max. 2.8 Nm
Terminals - Data Output
Wire min 0.05 mm²
Recommended torque max. 0.4 Nm

Installation Steps

  1. Switch off the circuit breaker [AC-OFF].
  2. Mount the Smart Meter.
  3. Connect the wiring for 1 phase, 2 wires (refer to diagrams 3a and 3b).
  4. Mount the protective cover.
  5. Connect the data cables (e.g., to an inverter or other devices).
  6. Set up the terminating resistor (Steps 6-7).
  7. Mount the connector covers.
  8. Switch on the circuit breaker [AC-ON].
  9. Navigate in the settings: Use page up/down for value selection and adjust/confirm with a 2-second press.
  10. Enter the settings.
  11. Set up the password (default: 2633).
  12. Set up the address (default Modbus Address: 001).
  13. Cut the settings (exit settings).
  14. Start up the Smart Meter. Download the Fronius Solar.start app from the App Store or Google Play for installation assistance.

Further Information

For detailed, country-specific warranty terms, visit: www.fronius.com/solar/warranty

More information and documentation can be found at: manuals.fronius.com/html/4204260350

Models: TS 100A-1 Smart Meter, TS 100A-1, Smart Meter, Meter

File Info : application/pdf, 2 Pages, 832.09KB

PDF preview unavailable. Download the PDF instead.

QUICK START GUIDE FRONIUS Smart Meter TS 100A-1 IT EN

References

PDFium PDFium

Related Documents

Preview Fronius Smart Meter TS 5kA-3 Quick Start Guide
A concise guide for installing and configuring the Fronius Smart Meter TS 5kA-3, detailing technical specifications, safety precautions, and step-by-step setup instructions for solar energy systems.
Preview Fronius Smart Meter TS 65A-3 Quick Start Guide - Installation and Specifications
Concise guide for installing and configuring the Fronius Smart Meter TS 65A-3. Includes technical specifications, step-by-step installation instructions, and safety warnings.
Preview Fronius Smart Meter TS 65A-3 Operating Instructions
Comprehensive guide for the Fronius Smart Meter TS 65A-3, covering installation, configuration, and operation for optimizing solar energy self-consumption and monitoring household energy usage.
Preview Fronius Smart Meter WR Operating Instructions
This document provides comprehensive operating instructions for the Fronius Smart Meter WR, covering safety guidelines, installation procedures, configuration steps, operational details, and technical specifications.
Preview Fronius Symo GEN24 Quick Start Guide
Quick start guide for the Fronius Symo GEN24 inverter, covering installation, connection, and commissioning. Includes technical specifications and safety warnings.
Preview Fronius Backup Switch 1P/3P-63A Quick Start Guide
Concise guide for installing and operating the Fronius Backup Switch 1P/3P-63A. Includes safety warnings, wiring instructions, and configuration steps.
Preview Fronius Ohmpilot Operating Instructions
Comprehensive operating instructions for the Fronius Ohmpilot, detailing its features, installation, and usage for efficient energy management and hot water preparation using solar power.
Preview Fronius Backup Power Solution: GEN24 Plus, Components, and Energy Storage
Discover the Fronius Backup Power Solution, featuring the GEN24 and GEN24 Plus inverters, compatible batteries, and smart meters for reliable household energy security. Learn about system configurations, advantages, and digital tools for managing your PV system.