Cudy RE1800 Wi-Fi Extender Quick Installation Guide

Package Content

• 1 x Wi-Fi Extender
• 1 x Quick Installation Guide

Method One: Using WPS Button

This method uses the WPS (Wi-Fi Protected Setup) button for a quick and secure connection.

Step 1: Connect the Extender

Plug the extender next to your router and wait until the power LED (?) turns solid on.

Diagram Description: Visual shows the Cudy extender being plugged in, with an arrow indicating the power LED changing from 'Flash' to 'Solid On'.

Step 2: Initiate WPS Connection

Press the WPS button on your router, and then press the WPS button (?) on the extender within 2 minutes.

Diagram Description: Visual depicts a router with its WPS button pressed, followed by the extender's WPS button being pressed. The extender's WPS button is noted as requiring a '1 second' press.

Step 3: Pairing and Connection

The extender's Wi-Fi LED (?) will start to flash. Wait until both the power LED (?) and the Wi-Fi LED (?) turn solid on. This signifies a successful connection to your host Wi-Fi network.

Diagram Description: Two visual sequences illustrate the process: 'Pairing process' shows LEDs flashing then solid, and 'Connection process' similarly shows LEDs flashing then solid.

Troubleshooting: If the Wi-Fi LED does not turn solid on after 2 minutes, repeat Step 2. If the issue persists, try Method Two (Using Web Browser) or contact Cudy support at support@cudy.com.

Step 4: Connect Your Device

Connect your device (e.g., computer, smartphone) to the extender's new Wi-Fi network. The new network name is derived from your host Wi-Fi network name, with "-EXT2G" or "-EXT5G" appended.

Example:

• Host Wi-Fi network name: YourNetworkName
• New extended Wi-Fi network name: YourNetworkName-EXT2G or YourNetworkName-EXT5G

Use the same Wi-Fi password that you use for your host router.

Step 5: Optimize Placement

Relocate the extender halfway between your router and the Wi-Fi dead zone. Find an optimal location to plug it in, using the LED indicator as a guide.

Diagram Description: A visual layout shows the ideal placement: Router --- Halfway --- Extender --- Clients. It also details LED status meanings: Red Flash (Connecting/Not Connected), Solid Red (Connected, weak signal), Solid Purple (Connected, fair signal), Solid Blue (Connected, strong signal).

Enjoy seamless internet connectivity! ?

Method Two: Using Web Browser

This method involves configuring the extender through a web browser interface.

Step 1: Connect the Extender

Plug the extender next to your router and wait until the power LED (?) turns solid on.

Diagram Description: Visual shows the Cudy extender being plugged in, with an arrow indicating the LED changing from 'Flash' to 'Solid On'.

Step 2: Access the Login Page

Connect your computer or smartphone to the extender's default Wi-Fi network (e.g., Cudy-RE1800). A login window should appear. Use "admin" as the password to log in.

Diagram Description: A screenshot displays the login interface for http://cudyre.net/, showing fields for username (defaulting to 'admin') and password ('admin'), with a 'Log In' button.

Note: If the login window doesn't appear, launch a web browser and navigate to http://cudyre.net/ or http://192.168.10.254/. Use "admin" for the password. For further assistance, consult FAQ > Q1.

Step 3: Configuration Steps

Select "Wireless Extender" and click "Next". Follow the on-screen configuration steps to completion. After setup, a confirmation page will appear. Wait for the Wi-Fi LED (?) to turn solid, which may take 1-2 minutes.

Diagram Description: A visual representation of the setup wizard progress (Steps 1-4: Mode, Host Network, Extended Network, Summary). Another visual shows the network connection status after setup, listing available networks like "XXXXXXXX-EXT2G" and "XXXXXXXX-EXT5G".

Note: Please verify on-screen information to ensure the password matches your router's Wi-Fi password. An incorrect password will prevent the extender from connecting to the router's Wi-Fi.

Step 4: Optimize Placement

Relocate the extender halfway between your router and the Wi-Fi dead zone. Find an optimal location to plug it in, using the LED indicator as a guide.

Diagram Description: A visual layout shows the ideal placement: Router --- Halfway --- Extender --- Clients. It also details LED status meanings: Red Flash (Connecting/Not Connected), Solid Red (Connected, weak signal), Solid Purple (Connected, fair signal), Solid Blue (Connected, strong signal).

Step 5: Connect Your Device

Connect your device to the extender using the extended SSID and the Wi-Fi password configured during setup. The default Wi-Fi password is the same as your host Wi-Fi network (router Wi-Fi).

LED and Button Status

Frequently Asked Questions

Q1: What can I do if the login window does not appear?

A1: If your computer is wirelessly connected, ensure you are connected to the extender's SSID.

A2: If your computer is connected via an Ethernet cable, ensure the connection is stable.

A3: Ensure your computer is set to obtain an IP address and DNS server address automatically.

A4: Verify that http://cudyre.net/ (or http://192.168.10.254/) is correctly entered in the web browser and press Enter.

A5: Reset the device and try again.

Q2: What should I do if my device cannot find the Wi-Fi signal?

A: Ensure the device is connected and powered on. If everything appears normal but no signal is detected, try configuring via a computer or restoring the extender to factory settings. If no signal is present even after factory reset, try restarting the extender. Persistent issues may indicate a device fault.

Q3: How to reset to default settings?

A: With the device powered on, press and hold the Reset button for 2 seconds. Wait 1-2 minutes for the device to restart.

EU Declaration of Conformity

Cudy declares that this device complies with the essential requirements and other relevant provisions of EU directives, including 2014/53/EU, 2011/65/EU, (EU) 2015/863, and 2009/125/EC. The original EU declaration of conformity can be accessed at http://www.cudy.com/ce.

This declaration is available in multiple languages, including English, German, Spanish, Italian, French, Greek, Dutch, Portuguese, Polish, Turkish, Norwegian, Swedish, Czech, and Slovak.