Cudy Wi-Fi Extender Quick Installation Guide

This guide provides instructions for setting up your Cudy Wi-Fi Extender using two methods: WPS button or Web Browser. It also includes information on LED indicators and answers to common questions.

Method One: Using WPS Button

This method allows for a quick connection between your router and the extender.

Step 1: Plug in the Extender.
Connect the Cudy Wi-Fi extender next to your existing router. Wait until the power LED on the extender turns solid on, indicating it is ready.
Step 2: Initiate WPS Connection.
Press the WPS button on your router. Within 2 minutes, press the WPS button on the Cudy extender. The extender's LED will begin to flash.
Step 3: Connection Confirmation.
Wait for the extender's LED to turn solid. This indicates a successful connection to your host Wi-Fi network. If the LED does not turn solid after 2 minutes, repeat Step 2. If issues persist, try Method Two or contact Cudy support at support@cudy.com.
Step 4: Connect Your Device.
On your computer or smartphone, find and connect to the extender's new Wi-Fi network. The network name will be your original Wi-Fi network name with either '--EXT2G' or '--EXT5G' appended. The password remains the same as your router's Wi-Fi password.
Step 5: Optimal Placement.
Relocate the extender to a position halfway between your router and the area with poor Wi-Fi signal (dead zone). Plug it in and observe the LED to ensure a good connection. A solid blue LED indicates a strong connection.

Method Two: Using Web Browser

This method provides a guided setup through a web interface.

Step 1: Plug in the Extender and Connect.
Connect the Cudy Wi-Fi extender next to your router and wait for the LED to turn solid. Then, connect your computer or smartphone to the extender's default Wi-Fi network, typically named 'Cudy--Extender'.
Step 2: Access Setup Interface.
Open a web browser on your connected device and navigate to either http://cudyre.net/ or http://192.168.10.254/. Log in using 'admin' as the password. If the login window does not appear, please refer to the FAQ section (Q1).
Step 3: Configure Settings.
Select 'Wireless Extender' as the operation mode and click 'Next'. Follow the on-screen prompts through the configuration steps, which typically involve selecting your host Wi-Fi network, entering its password, and configuring the extended network. Wait for the extender's LED to turn solid, which may take 1-2 minutes.
Step 4: Connect Your Device.
Once the extender is successfully connected (solid LED), connect your devices to the new extended Wi-Fi network. The network name will be your original Wi-Fi network name with '--EXT2G' or '--EXT5G' appended, and the password is the same as your router's.
Step 5: Optimal Placement.
Position the extender halfway between your router and the Wi-Fi dead zone for optimal coverage. Use the LED indicator to find the best location; a solid blue light signifies a strong connection.

LED Indicators and Buttons

Understanding the LED lights and buttons helps in setup and troubleshooting.

LED	Color / Status	Indication
Power	Off	No power
	On	System startup is complete
WPS/Signal	Red Flash	Connecting / Not connected to host Wi-Fi
	Solid Red	Connected to host Wi-Fi, signal is weak
	Solid Purple	Connected to host Wi-Fi, signal is fair
	Solid Blue	Connected to host Wi-Fi, signal is strong
WPS Button	Press to take effect	Initiates WPS pairing process.
Reset Button	Long press for 2 seconds	Resets the device to factory default settings.

Frequently Asked Questions (FAQ)

Q1: What can I do if the login window does not appear?: Ensure your computer is wirelessly connected to the extender's SSID. If connected via Ethernet, verify the connection is stable. Make sure your computer is set to obtain an IP address and DNS server address automatically. Double-check that http://cudyre.net/ or http://192.168.10.254/ is correctly entered in the browser. If problems persist, reset the device and try again.
Q2: What should I do if my device cannot find a Wi-Fi signal?: Confirm the extender is powered on and connected. If no signal is detected despite normal operation, try configuring via a computer or restoring the extender to factory settings. If the issue continues after a factory reset, try restarting the extender. If it still fails, the device may be faulty.
Q3: How to Reset to defaults?: With the power still on, press and hold the WPS/RST button for 5 seconds. Wait 1-2 minutes for the device to restart with factory default settings.

Support

For technical support, user guides, and more information, please visit: http://www.cudy.com/support or contact support@cudy.com.

	Cudy Wi-Fi Range Extender: Quick Installation Guide This guide provides step-by-step instructions for setting up your Cudy Wi-Fi Range Extender, helping you eliminate Wi-Fi dead zones and enjoy stronger network coverage using WPS or a web browser.
	Cudy AX1800 RE1800 Wi-Fi 6 Range Extender - Boost Your Home Network Discover the Cudy AX1800 RE1800, a powerful Wi-Fi 6 Range Extender designed to eliminate dead spots and provide a stronger, more reliable wireless signal throughout your home. It ensures seamless connectivity for all your devices.
	Cudy RE1200 AC1200 Dual Band Wi-Fi Range Extender - Product Overview Detailed information about the Cudy RE1200 AC1200 Dual Band Wi-Fi Range Extender, including features, specifications, Wi-Fi extender mode, access point mode, and Cudy Whole Home Mesh system capabilities.
	Cudy RE1800 AX1800 Wi-Fi 6 Mesh Extender Quick Installation Guide Quick installation guide for the Cudy RE1800 AX1800 Wi-Fi 6 Mesh Extender, detailing setup steps, pairing methods, and LED indicators.
	Cudy RE1800 Wi-Fi Extender Quick Installation Guide A comprehensive guide to setting up your Cudy RE1800 Wi-Fi Extender using WPS or a web browser. Includes detailed instructions, LED indicator explanations, and troubleshooting FAQs.
	Cudy AC1200 Dual Band Range Extender RE1200 Declaration of Conformity Declaration of Conformity for the Cudy AC1200 Dual Band Range Extender (Model RE1200), confirming compliance with relevant EU directives and standards.
	Cudy RE 1200 AC1200 Dual Band Range Extender - Enhance Wi-Fi Coverage Discover the Cudy RE 1200, an AC1200 Dual Band Range Extender. This datasheet outlines its features, specifications, and dual functionality as a Wi-Fi Extender or Access Point to eliminate dead zones and improve network performance.
	Cudy RE1200 AC1200 WiFi 5 Range Extender with Mesh - Technical Specifications Detailed technical specifications for the Cudy RE1200 AC1200 Ethernet WiFi5 Range Extender with Mesh, featuring AC1200 WiFi 5, 867 Mbps + 300 Mbps speeds, dual-band mesh, and plug-in design. Learn more at ComX Computers.