Arcade1Up Pac-Man 40th Riser Assembly Instructions
Same Graphics on Side Panels
Dimensions: W11" x H13.25"
Revision: S.S.REV 03.03.20
?️ Tools Needed
- TOOLS NEEDED
- OUTILS NÉCESSAIRES
- VERKTØY NØDVENDIG
- VÆRKTØJER NØDVENDIGT
- WERKZEUGE BENÖTIGT
- HERRAMIENTAS NECESARIAS
- GEREEDSCHAP NODIG
- VERKEFNI ÞÖRF
- VERKTYG TILLHÅLLS
- TARVITETTAVAT TYÖKALUT
- STRUMENTI NECESSARI
- FERRAMENTAS NECESSÁRIAS
Parts Identification
- Dowel: r a x16
- Screw: r b x20
- Screw: r c x4
- Panel: rN (x2)
- Panel: rM
- Panel: rP (x2)
- Panel: rO
Assembly Steps
Step 1: Connect panels using dowels (r a x16) and screws (r b x8).
Step 2: Connect panels using screws (r b x8).
Step 3: Connect panels using screws (r b x8).
Step 4: Attach riser components using screws rQ.
Step 5: Attach riser components using screws rQ.
Final Assembly: The assembled Arcade Up machine with riser is secured with screws rC (x2).
⚠️ Important Safety Warnings
English: This apparatus must be securely attached to the wall in accordance with the installation instruction to prevent serious injury or death.
(This warning is also provided in Danish, Dutch, Finnish, French, German, Icelandic, Italian, Norwegian, Spanish, Swedish, and Portuguese.)
? Installation Note
English: There are no pre-drilled holes on the Arcade side panels; use self-tapping screws rC to fix the riser and arcade.
(This note is also provided in Danish, Dutch, Finnish, French, German, Icelandic, Italian, Norwegian, Spanish, Swedish, and Portuguese.)
