G63 LED Wireless Charging Bluetooth Speaker User Manual

Product Overview

This manual provides instructions for the G63 LED Wireless Charging Bluetooth Speaker, covering its features, operation, and technical specifications.

Key Functions & Operation

Powering On/Off: Press and hold the power button for two seconds. The device defaults to a warm light upon startup.

Wireless Charging: Automatically activates when the charger is inserted.

Music Control:

• Short press: Next track, Pause/Start, Previous track.
• Long press: Increase volume, Turn on/off, Decrease volume.

Light Control: Short press the 'M' button to cycle through different lighting effects. The device starts with a warm light.

Clock and Alarm Setting:

• Long press the 'M' button to enter clock setting mode.
• Use the pause button to switch between cursor positions.
• Long press the 'M' button again to enter alarm setting mode.
• Use the pause button to switch between cursor positions.

Bluetooth Function:

• The speaker supports Bluetooth devices with A2DP profile.
• To pair, turn on the device, then long press the 'M' button to enter Bluetooth mode. The blue indicator light will flash, and a voice prompt will indicate it's ready for pairing.
• Mobile Phone Connection:
  1. Enable Bluetooth on your mobile phone and search for devices.
  2. Select 'G63' from the list of available devices.
  3. Once paired, a voice prompt will confirm the connection.

TF Card/USB Drive Function:

• Insert a TF card or USB drive into the respective slot.
• The device will automatically read and play audio files.
• Use the speaker's '+/-' buttons to adjust volume.

Technical Parameters

• Battery Type: Lithium battery 1800mA
• Main Functions: Bluetooth, TF Card, USB, AUX, Wireless Charging, LED Lights
• Product Dimensions: 145*52*155mm
• Speaker Size: 36mm
• Speaker Resistance: 4Ω
• Speaker Output Power: 3W
• Wireless Charging Power: 10W
• Power Input: DC 5V/2A

Safety Instructions

• Do not expose the product to water or damp areas, such as bathrooms.
• Avoid forceful impact or dropping the product to prevent damage.
• Turn off the power when the product is not in use for extended periods.

Warranty and After-Sales Service

For any issues encountered during use, please contact the manufacturer. Shenzhen Bozhong Jiajia data Co. LTD is responsible for every customer.

FCC Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Caution: Any changes or modifications to this device not explicitly approved by the manufacturer could void your authority to operate this equipment.

RF Exposure Information: This device complies with FCC RF exposure requirements. Ensure a minimum distance of 20 centimeters is maintained from the device surface during operation.