G63 LED Wireless Bluetooth Speaker

Product Overview

The G63 is an LED Wireless Bluetooth speaker with integrated wireless charging capabilities. It supports Bluetooth, TF card, USB, and AUX input, along with colored lighting effects.

Use of wireless charging:

Insert the charger to automatically start wireless charging.

Key Functions:

• Next Song: Short press
• Volume Down: Long press
• Pause/Play: Short press
• Power On/Off: Long press
• Previous Song: Short press
• Volume Up: Long press
• Control Light: Short press
• Enter Clock Settings: Long press (short press to toggle cursor)
• Set Alarm: Long press (short press to switch cursor)

Key Function Operation Instructions

Power On: Press and hold the power button for two seconds to start the machine. The default light is a warm light.

Bluetooth Function Use:

1. This speaker supports Bluetooth devices with A2DP function. Turn on the device and long press the 'M' key to enter Bluetooth mode. The blue indicator light will flash with a voice prompt, indicating it is ready for pairing.
2. Mobile Phone Connection:
   1. In your phone's settings, turn on Bluetooth and search for devices.
   2. When 'G63' appears in the available devices list, click it to enter pairing mode. A voice prompt will confirm a successful connection.

Light Use:

• The G63 Bluetooth speaker is equipped with various lighting effects.
• The default lighting effect upon powering on is a warm light. Press and hold the 'M' key, then press the light key to adjust the lighting.

TF Card/U Disk Function Use:

Insert a TF card or U disk into the slot. A voice prompt will appear, and the product will automatically read and play audio files from the card/disk. Use the speaker's '+/-' buttons to control the music volume.

Technical Parameters

• Product Model: G63
• Battery Type: Polymer battery 300 mA
• Bluetooth Scheme: Jaylie
• Speaker Resistance: 4Ω
• Speaker Output Power: 3W
• Wireless Charging Power: 5W
• Main Functions: BT, TF, USB, AUX, wireless charging, colored lights
• Power Input: DC5V/2A
• Product Size: 145mm*52mm*155mm
• Speaker Size: 36mm

Safety Instructions

• Do not expose the product to water or humid areas, such as bathrooms.
• Do not hit or drop the product forcefully to avoid damage.
• Turn off the power when not in use for an extended period.

Warranty and After Sales Service

For any issues during use, please contact Shenzhen HongXinYeHui Electronic Technology Co., Ltd. They are responsible for every customer.

FCC Warning

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Caution: Any changes or modifications to this device not explicitly approved by the manufacturer could void your authority to operate this equipment.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body.