LED Wireless Bluetooth Speaker G63

Instructions for use of wireless charging speaker

Insert the charger to automatically start wireless charging.

• Short press a song ? Long press volume down ?
• Short press pause/start ▶️ Long press on/off power_settings
• Short press the previous song ⏪ Long press to increase the volume ?
• Short press to control the light ✨, long press to enter the clock settings (short press to toggle the light ?), set the alarm in long press (short press to switch the cursor) ➡️

Technical Parameter

Product model: G63

Battery type: polymer battery 300mA

Bluetooth scheme: Jaylie

Main functions: BT.TF.USB.AUX. wireless charging, colored lights ?

Product size: 145mm*59mm*155mm

Speaker size: 36mm

Speaker resistance: 4Ω

Speaker output power: 3W

Wireless charging power: 5W

Power input: DC5V/2A

Key function operation instructions

Power on:

Press and hold the power on button for two seconds to start the machine, and the default warm light is on ?.

Bluetooth function use:

1. This audio system supports the use of Bluetooth devices with A2DP function. First, turn it on, and press and hold the M key to enter Bluetooth mode. When the Bluetooth mode is entered, the blue light of the Bluetooth indicator light flashes, accompanied by voice prompt ?️, and the audio is in the state of waiting for pairing connection. Only in this state can it be connected with Bluetooth audio. Pair and connect.
2. Mobile phone connection:
• Step 1: Open the Bluetooth setting switch in the mobile phone settings, and click Search Device ?.
• Step 2: When the G63 character is displayed on the available device, it means that the mobile phone has found the Bluetooth audio. Click G63 to enter the pairing mode. After the phone and audio are successfully paired, a voice prompt will be displayed "Show connected" ✔️.

Light Use:

1. G63 Bluetooth speaker is equipped with a variety of lighting effects.
2. The default light warming effect is when the device is turned on. Press and hold the M key and then press the light key to adjust the light.

TF Card/U Disk Function Use:

Insert the TF card/U disk into the card slot, the corresponding voice prompt will appear ?, and the product will automatically read the audio file in the card is played, and the user can use the speaker "+/-" buttons to control the size of the music sound.

Safety Instructions:

• Do not expose the product to water or humid areas, such as bathrooms ?.
• Please do not hit or drop the product hardly to avoid manual damage ⚠️.
• When not in use for a long time, please turn off the power ?.

Warranty and After Sales Service:

If you have any questions during use, please feel free to contact Shenzhen Duoduozan Electronics Co., Ltd. We are responsible for every customer.

FCC Warnning:

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Radiation Exposure Statement for Bluetooth:

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body.

Radiation Exposure Statement for WPT:

This device complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. During the operation of device a distance of 15 cm surrounding the device and 20 cm above the top surface of the device must be respected.