Philips B Line 222B9T/242B9T SmoothTouch Monitor Quick Start Guide

Introduction

This guide provides essential information to help you set up and start using your Philips B Line SmoothTouch monitor.

What's in the Box

The package typically includes:

• Philips Monitor
• Power Cable
• USB A-to-B Cable (for touch functionality)
• VGA Cable
• DVI Cable
• HDMI Cable
• DisplayPort Cable
• Audio Cable
• I/O Cover
• AC/DC Adapter
• Stylus (may vary by region)
• CD (containing User's Manual and Drivers)

Note: Contents may vary depending on the region or specific model purchased. Display design may differ from illustrations.

Step 1: Connecting Your Monitor

Follow these steps to connect your monitor:

1. Connect Power: Plug the power cable into the monitor and a power outlet.
2. Connect Video Source:
   • Connect one end of a VGA, DVI, HDMI, or DisplayPort cable to the corresponding port on the monitor.
   • Connect the other end to the video output port on your computer.
3. Connect USB for Touch:
   • Connect the USB A-to-B cable from the monitor's USB upstream port to a USB port on your computer. This enables the touchscreen functionality.
4. Connect Audio (Optional): If your monitor has built-in speakers and you wish to use them, connect an audio cable from your computer's audio output to the monitor's audio input.
5. Connect USB Devices: Utilize the monitor's built-in USB hub for connecting peripherals.

Diagram Description: The connection diagram illustrates plugging in power, video cables (VGA, DVI, HDMI, DP) to the monitor and computer, and a USB cable for touch functionality. It also shows a USB hub integrated into the monitor.

Step 2: Adjusting the Monitor Stand

The monitor stand allows for ergonomic adjustments:

• Tilt: Adjust the screen angle from approximately 0° to 70° forward/backward.
• Rotation: The screen can be rotated 90° (portrait orientation).

Diagram Description: An illustration shows the monitor stand, indicating the range of tilt adjustment (0-70 degrees) and a 90-degree rotation capability for the display panel.

Step 3: Using the On-Screen Display (OSD)

Control your monitor's settings using the physical buttons located on the monitor, typically on the front or bottom edge.

Common OSD controls and functions:

• Power Button [Power Button]: Turns the monitor on or off.
• Input Select Button [Input Button]: Cycles through available video input sources (VGA, DVI, HDMI, DisplayPort).
• Navigation Buttons [Up Arrow]/[Down Arrow]/[OK Button]: Used to navigate through the OSD menus and select options.
• Brightness Control: Adjusts the screen brightness.
• LowBlue Mode: Reduces blue light emission for eye comfort.
• SmartImage: Optimizes display settings based on content.

Diagram Description: The OSD navigation diagram shows the monitor buttons and how to use them to access and adjust settings within the on-screen menu. It highlights options like Input selection, Brightness, and LowBlue Mode.

Support and Registration

For further assistance, troubleshooting, drivers, and to register your product, please visit the Philips support website:

www.philips.com/support

Register your product at:

www.philips.com/welcome

This product is manufactured by and sold under the responsibility of Top Victory Investment Ltd. Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V. and are used under license.

Version: M92224BQ1WWT

Printed in China.