Philips E Line Monitor Quick Start

Welcome and Product Information

Welcome to your new Philips E Line monitor. This guide provides essential information for setting up and using your display.

Register your product and access comprehensive support, including user manuals, FAQs, and software downloads, by visiting:

• www.philips.com/support
• www.philips.com/welcome

This product is manufactured by and sold under the responsibility of Top Victory Investments Ltd. Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V. and are used under license. Specifications are subject to change without notice.

The terms HDMI, HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing Administrator, Inc.

Document Version: M1241ESCQ1WWT. Printed in China.

What's Included

Your monitor package typically includes the following items:

• Monitor Display
• AC/DC Adapter
• Audio cable
• VGA cable
• HDMI cable

Note: Included accessories may vary depending on the region or specific model purchased. Display design may differ from illustrations.

Setup and Connections

Monitor Placement and Tilt:

The monitor stand allows for tilting the screen. The tilt range is approximately 5 degrees backward to 20 degrees forward, allowing you to adjust the viewing angle for comfort.

Safety Precautions:

Please observe the following safety symbols:

• General Warning: [Warning Symbol] Indicates potential hazards or important safety information.
• Electrical Safety: [Power Disconnect Symbol] Ensure the monitor is disconnected from the power outlet before performing any maintenance or connections.
• Handle with Care: [Fragile Symbol] Handle the monitor carefully to prevent damage, especially to the screen. Protect from moisture.

Connecting Your Monitor:

To connect your Philips monitor (models 241E1SC, 241E1SCA) to your computer:

1. Connect the AC/DC adapter to the monitor's power input and plug it into a power outlet.
2. Connect the monitor to your computer's graphics output using either:
   • A VGA cable (connect to the D-SUB port on the monitor and the VGA port on your computer).
   • An HDMI cable (connect to the HDMI port on the monitor and the HDMI port on your computer).
3. If your computer has audio output and the monitor has audio input, you can connect an audio cable for sound.

The diagrams illustrate connecting the power adapter and video cables (VGA or HDMI) from the computer to the respective ports on the monitor.

Using the On-Screen Display (OSD) Controls

Your Philips monitor is equipped with control buttons, typically located on the rear or underside of the display, for navigating the On-Screen Display (OSD) menu. These controls allow you to adjust various picture and system settings.

Common OSD Settings and Features:

• Power Button: Turns the monitor on or off.
• Navigation Buttons: Use these buttons (often labeled with arrows or symbols like OK/Menu) to move through menus, select options, and confirm changes.
• LowBlue Mode: Helps reduce eye strain by minimizing blue light emitted from the screen. Options typically include Off, Low, Medium, and High.
• SmartImage: This feature optimizes display performance based on the content being viewed. Preset modes may include FPS, Racing, RTS, Gamer 1, Gamer 2, and Off.
• Input Selection: Allows you to choose the active video source, such as VGA or HDMI 1.4.
• Brightness: Adjusts the overall brightness level of the screen.
• Volume: Controls the audio volume for the monitor's built-in speakers or audio output, if applicable.
• Color: Provides options to adjust color temperature, saturation, or other color-related settings.
• Language: Selects the language for the OSD menu interface.

The OSD menu diagrams show examples of navigating through these settings, such as selecting an input source or adjusting the brightness level.