Outdoor Daybed with Canopy

Important Safety Information & Preparation

Before You Start: Please read all instructions carefully. Retain instructions for future reference. Separate and count all parts and hardware. Read through each step carefully and follow the proper order. It is recommended that, where possible, all items are assembled near to the area in which they will be placed in use, to avoid moving the product unnecessarily once assembled. Always place the product on a flat, steady, and stable surface. Keep all small parts and packaging materials for this product away from babies and children as they potentially pose a serious choking hazard.

Notice:

• Tighten screws to 50% before fixing all screws; an Allen wrench is recommended instead of an electric drill.
• Place the item on a flat ground to adjust and make sure it remains stable.
• Tighten up all screws gradually with tools.
• If screws are not aligned with holes during assembly, loosen all other screws to 50% and continue assembly.
• If the item is not stable, loosen all screws, adjust on a flat ground, and tighten all screws again.
• Note: If some screws are fully tightened, others may not align. However, all holes are designed to be relatively larger to provide more space for adjustment.

Part List

Hardware List

Assembly Steps

Step 01: Frame Assembly

Connect the Right Frame (A) and the Side Right Frame (C) using two Bolts (3) and two Washers (7).

Step 02: Frame Assembly

Connect the Left Frame (B) and the Side Left Frame (T) using two Bolts (3) and two Washers (7).

Step 03: Seat Frame Connection

Connect two Seat Frames (D) together using two Bolts (5), two Washers (7), and two Nuts (6).

Step 04: Seat Frame Connection

Connect two Seat Frames (D) together using two Bolts (5), two Washers (7), and two Nuts (6).

Step 05: Connecting Seat Frame Assemblies

Connect the assembly from Step 3 to the assembly from Step 4 using two Bolts (5), two Washers (7), and two Nuts (6).

Step 06: Front Frame Connection

Connect the Front Right Frame (E) and the Front Left Frame (F) using two Bolts (3) and two Washers (7).

Step 07: Back Frame Connection

Connect the Back Right Frame (G) and the Back Left Frame (H) using four Bolts (4) and four Washers (7).

Step 08: Main Frame Assembly

Connect the assembly from Step 1 (Right Frame A & Side Right Frame C) to the assembly from Step 6 (Front Right Frame E & Front Left Frame F) using four Bolts (3) and four Washers (7).

Step 09: Main Frame Assembly

Connect the assembly from Step 8 to the assembly from Step 5 (Seat Frame D assembly) using four Bolts (3) and four Washers (7).

Step 10: Main Frame Assembly

Connect the assembly from Step 9 to the assembly from Step 7 (Back Frame G & H) using two Bolts (3), two Bolts (4), and four Washers (7).

Step 11: Main Frame Assembly

Connect the assembly from Step 10 to the assembly from Step 2 (Left Frame B & Side Left Frame T) using two Bolts (3), two Bolts (4), and four Washers (7).

Step 12: Leg Frame Attachment

Connect the assembly from Step 11 to the Leg Frame (I) using four Bolts (1) and four Washers (7).

Step 13: Feet Attachment

Connect the assembly from Step 12 to the Plastic feet corner (8) and the Plastic feet (9) using four Bolts (2).

Step 14: Final Frame Reinforcement

Connect the assembly from Step 13 to the assemblies from Step 1, Step 2, and Step 7 using four Bolts (4) and four Washers (7).

Step 15: Armrest Attachment

Connect the assembly from Step 14 to the Arm Right Frame (L) and the Arm Left Frame (M) using two Bolts (2) and two Washers (7).

Step 16: Canopy Frame Connection

Connect Canopy Frame (N) to Canopy Frame (R) using two Screws (11).

Step 17: Canopy Frame Connection

Connect Canopy Frame (O) to Canopy Frame (R) using two Screws (11).

Step 18: Canopy Frame Connection

Connect Canopy Frame (P) to Canopy Frame (R) using two Screws (11).

Step 19: Canopy Frame Connection

Connect Canopy Frame (Q) to Canopy Frame (R) using two Screws (11).

Step 20: Canopy Assembly

Assemble the canopy structure by connecting the parts from Steps 16, 17, 18, and 19. Then, attach the Waterproof canopy (U) to the assembled canopy frame structure.

Step 21: Final Structure Assembly

Connect the assembly from Step 15 to the assembly from Step 20 using two Bolts (3), two Washers (7), and two Washers (10).

Step 22: Gas Bar Installation

Connect the assembly from Step 21 with the Gas bar (12).

Step 23: Final Touches

Place the Seat cushion (J) and the Pillows (K) onto the daybed to complete the assembly.

Combination and Arrangement

This daybed can be configured in various combinations and arrangements to suit different needs and spaces. The modular design allows for flexibility in its setup.

Return / Damage Claim Instructions

DO NOT discard the box / original packaging. In case a return is required, the item must be returned in its original box. Without this, your return will not be accepted.

Take a photo of the box markings. A photo of the markings (text) on the side of the box is required in case a part is needed for replacement. This helps our staff identify your product number to ensure you receive the correct parts.

Take a photo of the damaged part (if applicable). A photo of the damage is always required to file a claim and get your replacement or refund processed quickly. Please make sure you have the box even if it is damaged.

Send us an email with the images requested. Email us directly from the marketplace where your item was purchased with the attached images and a description of your claim.