Beurer LA 40 Aroma Diffuser

Introduction

Thank you for choosing the Beurer LA 40 Aroma Diffuser. Beurer offers thoroughly tested, high-quality products for measuring weight, blood pressure, body temperature and pulse, gentle therapy, massage, air heating and humidification, as well as devices for cosmetic care and childcare.

This manual provides instructions for safe and effective use of the aroma diffuser. Please read it carefully, keep it for future reference, and make it available to other users.

Package Contents

Please check the package contents for external damage and completeness before use. Ensure the device and accessories are undamaged and all packaging materials have been removed. If you have any doubts, stop using the device and contact your dealer or customer service.

• 1 x Aroma diffuser
• 1 x Power adapter
• 1 x Instruction manual

Explanation of Symbols

Intended Use

The aroma diffuser is used solely to improve air quality in rooms. The device is intended for private use only.

The device must only be used for the purpose for which it was designed and in the manner specified in these operating instructions. Use contrary to the intended purpose can be dangerous! The manufacturer is not liable for damage resulting from improper use of the device.

Important Notes and Safety Instructions

Device Description

The device consists of the following parts:

• 1. Steam outlet
• 2. Porcelain cover
• 3. Inner lid
• 4. Air channel cover
• 5. Air channel opening
• 6. Water tank
• 7. Connection socket (on the back)
• 8. Base
• 9. Steam/timer button
• 10. Ambient light button
• 11. Timer indicator

[Diagram showing the parts of the Beurer LA 40 Aroma Diffuser with numbered labels corresponding to the list above.]

Operation

6.1 Switching the device on

• Press the steam/timer button to switch on the device.

6.2 Setting the timer and ambient light

The device has the following functions:

Steam/timer button:

• Press 1x: Continuous steam generation
• Press 2x: Steam generation for 1 hour
• Press 3x: Steam generation for 3 hours
• Press 4x: Steam generation for 7 hours
• Press 5x: Switch off the device

Ambient light button:

• Press 1x: Warm, bright light
• Press 2x: Ambient light with color change
• Press 3x: Continuous, cycling ambient light
• Press 4x: Switch off ambient light

6.3 Setting steam intensity

To switch between intermittent and continuous steam generation, press and hold the steam/timer button for 2 seconds until the timer indicator flashes.

Intermittent steam generation (30 sec on / 30 sec off) ⇌ Continuous steam generation

After use

1. Disconnect the device from the mains socket and power adapter.
2. Remove the porcelain cover and inner lid upwards.
3. Pour out any remaining water into the drain.

What to do if the device tips over during use?

If the device tips over during use, water may enter the air channel opening. In this case, to allow water to drain from the air channel opening, there is a water drain opening on the bottom of the device. To allow water to drain, proceed as follows:

1. Unplug the power adapter from the socket.
2. Empty the water tank so that the air channel opening points upwards – water must not enter the air channel.
3. Tilt the device towards the water drain opening to allow water to drain.
4. Place the device upright and allow it to dry for at least 24 hours.

[Diagram showing how to drain water if the device tips over.]

7. Cleaning and Maintenance

Note: Before cleaning, ensure the device is disconnected from the power supply and there is no water in the tank. Regular cleaning is essential for hygienic and trouble-free operation. The aroma diffuser can be disassembled with a few hand movements without tools (see section "5. Operation" on page 109).

• The ultrasonic nebulizer is located in the center of the water tank. Clean the nebulizer carefully with a cosmetic swab weekly. Depending on the frequency of use, the ultrasonic nebulizer can also be cleaned several times a week.
• After each use, clean the device (especially the inner lid and the inside of the water tank) with a soft, slightly damp cloth. Do not use abrasive, corrosive, or solvent-based cleaning agents.

8. Additional/Replacement Accessories

To purchase additional/replacement accessories, visit www.beurer.com or contact the service address indicated for your country (see service addresses).

Additional and replacement accessories are also available in retail stores.

9. Disposal

Due to environmental protection requirements, do not dispose of the device with household waste after its service life. Dispose of the device at an appropriate collection point. Dispose of the device in accordance with the EU Directive on Waste Electrical and Electronic Equipment – WEEE.

If you have any questions, please contact your local authority responsible for disposal.

[Recycling symbol]

10. Troubleshooting

If a problem is not listed, please contact our customer service department.

11. Technical Data

12. Warranty/Service

Beurer GmbH, Söflinger Straße 218, D-89077 Ulm (hereinafter referred to as "Beurer") provides a warranty for this product under the following conditions and within the scope described below.

These warranty conditions do not affect the statutory warranty obligations of the seller arising from the purchase contract concluded with the buyer. The warranty also applies without prejudice to mandatory liability provisions.

Beurer guarantees the flawless functioning and completeness of this product.

The warranty period, valid worldwide, is 3 years, starting from the purchase of a new, unused product by the buyer.

This warranty applies only to products purchased by the buyer as a consumer exclusively for private purposes within the scope of domestic use.

German law applies, provided this is legally permissible.

If, during the warranty period, the product is found to be incomplete or defective in operation according to the provisions below, Beurer will replace or repair it free of charge in accordance with these warranty conditions.