Xiaomi Smart Band 7 User Manual
Precautions
- The lithium polymer battery in this band cannot be removed.
- When using the band to measure your heart rate, please ensure the wristband is worn correctly and regularly.
- Do not wear the band too tightly; ensure there is some space between the band and your wrist.
- If you experience discomfort or skin irritation, stop using the product immediately and seek medical advice.
- For swimming, avoid swimming pools or swimming near the shore. Remember to dry the band after swimming. Avoid exposing the band to direct impact from currents during water sports.
Battery Safety
This device is equipped with a built-in battery that cannot be removed or replaced by yourself. Do not attempt to open or modify the battery. Improper use may lead to leakage, overheating, fire, or explosion. Dispose of used batteries according to local regulations and do not mix them with household waste. Avoid exposing the battery to extremely high temperatures, direct sunlight, or flammable liquids or gases. Exposure to extremely low pressure may result in an explosion or leakage of flammable liquid or gas. Handle the battery correctly to prevent damage.
Product Overview
Read this manual carefully before use, and retain it for future reference.
Contents:
- Wristband
- Charging Cable
Illustrations of product, accessories, user interface, and data displayed in the user manual are for reference only. Actual product and functions may vary.
Diagram Description: The product overview shows two main components: the wristband, which is a flexible strap, and the fitness tracker module that fits into the wristband. A charging cable is also depicted.
How to Install
1. Insert one end of the fitness tracker into the slot from the front of the wristband.
2. Press down on the other end with your finger to push the fitness tracker fully into the wristband.
Diagram Description: This diagram illustrates the installation process. It shows the fitness tracker module being inserted into the wristband from the front, with an arrow indicating the direction of insertion. The second part shows pressing down on the other end to secure it.
Wearing
1. Comfortably tighten the band around your wrist. Position the band about a finger's width away from your wrist bone.
Tip: The band should be snug but not too tight. If it's too loose, it may affect heart rate readings.
Diagram Description: This diagram shows how to wear the smart band. It depicts the band on a wrist, with an indicator showing the correct placement and tightness, suggesting it should be snug but not too tight, and positioned slightly away from the wrist bone.
Connecting with APP
1. Scan the QR code to download and install the app. Add the Xiaomi Smart Band app first before you start using the band.
Diagram Description: This diagram displays a QR code, which users are instructed to scan to download and install the Xiaomi Smart Band application.
How to Use
After successfully pairing with your device, the band will start tracking and analyzing your daily activities and sleeping habits.
Tap the touchscreen to light it up.
Swipe left or right on the touchscreen to quickly select from functions or view notifications.
Diagram Description: This diagram illustrates the interaction with the smart band's touchscreen. It shows swiping left or right to navigate through different functions or screens, and tapping to select an option or light up the display.
Disassembling
To disassemble the band, gently pull the fitness tracker out of the wristband.
1. Hold the wristband with one hand.
2. Use your finger to find the gap between the fitness tracker and the wristband.
3. Gently push the fitness tracker out of the wristband.
Diagram Description: This diagram demonstrates how to remove the fitness tracker from the wristband. It shows a finger pressing into a gap between the tracker and the band to release the tracker module.
Charging
When using the band for the first time, connect it to the charging cable to turn it on.
Recharge your band immediately when the battery level is low.
Diagram Description: This diagram shows the fitness tracker module connected to the charging cable, with the cable's connector plugged into the tracker and the other end ready to be connected to a power source.
Specifications
Specification | Details |
---|---|
Model | M212981 / Smart Band 7 |
Strap Material | Thermoplastic elastomer, Aluminum alloy |
Adjustable Length | 160–224 mm |
Compatibility | Android 6.0 & iOS 10.0 or higher |
Battery Capacity | 180 mAh |
Input Voltage | 5V ⎓ 250 mA Max |
Battery Type | Lithium polymer battery |
Water Resistance | 5 ATM |
Operating Temperature | 0°C to 45°C |
Bluetooth Frequency | 2402–2480 MHz |
Max. Output Power | < 20 mW (Bluetooth®) |
Regulatory Information
WEEE Disposal and Recycling Information
All products bearing this symbol are waste electrical and electronic equipment (WEEE) which should not be mixed with unsorted household waste. Please protect the environment and your health by ensuring that this product is disposed of responsibly. Contact your local authorities or recycling facilities for more information on proper disposal methods.
EU Declaration of Conformity
Hereby, Xiaomi Communications Co., Ltd. declares that the radio equipment type M212981 is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity and compliance information can be found at the following internet address: https://www.mi.com/global/service/support/declaration.html
Warranty Notice
This legal warranty notice informs you of your rights under the legal warranty. For a full understanding of your rights, please consult the laws of your country or region. The warranty provided by Xiaomi is in addition to any statutory warranty rights you may have. For more information about the consumer warranty benefits, please refer to Xiaomi's official website: https://www.mi.com/en/service/warranty/. If you have purchased the Product directly from Xiaomi, please consult the terms provided by Xiaomi. There is no guarantee that the operation of the Product will be uninterrupted or error-free. The warranty does not cover damage caused by accident, misuse, abuse, neglect, improper installation, or normal wear and tear. The warranty covers repair, (2) replacement, or refund.
Manufactured For
Xiaomi Communications Co., Ltd.
Manufactured By
Anhui Huami Information Technology Co., Ltd. (A Mi Ecosystem company)
Address: Building 82, Huami Global Innovation Center, 900, Wangjiang West Road, High-tech Zone, Hefei City, China (Anhui) Pilot Free Trade Zone
Note: The present warranty does not apply in Hong Kong and Macao. Products which were not duly imported and/or duly manufactured by Xiaomi and/or acquired from Xiaomi and its authorized sellers are not covered.
For further information, please contact the vendor who sold the Products to you.
For regulatory information, and compliance logos related to Xiaomi, go to Settings > System > Regulatory.