Fachixy FC-200 Wireless Gaming Headset

Package Contents

• Wireless Headset * 1 [headset icon]
• User Manual * 1 [manual icon]
• Charging Cable * 1 [charging cable icon]
• USB Dongle * 1 [USB dongle icon]

Product Features

• Versatile Connectivity: Seamlessly switch between Bluetooth and 2.4GHz.
• Ultra-Low Delay: Delight in low latency for precise, immersive audio.
• Ultimate Comfort: Lightweight, foldable, and ergonomic design ensures extended comfort during wear.
• Gaming Without Limits: Enjoy up to 50 hours of playtime with just a 2.5 hour charge.
• Vibrant Gaming Ambience: Captivating lighting effects to enhance the gaming experience for passionate gamers.

Before Using: Charging

Note:

1. Before using the wireless gaming headset for the first time, please charge it for at least 2 hours.
2. Please refrain from using high-power or low-quality chargers to charge the gaming headsets.
3. When the battery level falls below 10%, you will hear a "Low Battery" voice prompt.
4. The red LED will indicate that the wireless headset is charging. Once fully charged, the LED will turn green.

Product Overview

Power On/Off: Long press 3s to turn on; Long press 4s to turn off. Voice prompt: "Power on"/"Power off".

Playback Control: Single click for Play/Pause; Triple clicks for Previous track; Double clicks for Next track.

Call Management: Single click to Answer/Hang up call (Voice prompt: "Di Di"); Long press 2s to Reject call (Voice prompt: "Di~").

Volume Control: [volume control icon]

Microphone Control: Single click for Microphone on/off. Voice prompt: "Microphone on"/"Microphone off".

Mode Switching: Long press 2s to switch between Bluetooth mode and 2.4G Dongle mode.

RGB Lighting: Single click to turn RGB on/off. Voice prompt: "RGB on"/"RGB off".

Game/Music Mode: Double clicks. Voice prompt: "Game mode"/"Music mode".

Re-pairing (Bluetooth mode): Long press 3s. Voice prompt: "Pairing" with flashing blue light.

Illustration of the headset's control layout.

How to Use These Two Modes

Note: Neither mode is available on Xbox.

Compatible Devices: PS5, PS4, PC, Mac, Laptop, mobile, Nintendo Switch (microphone may be invalid on Switch).

1. Bluetooth Mode

• Delays ≤ 48ms.
• Compatible with PC/Mac/Nintendo Switch/Mobile.
• Bluetooth mode employs 5.4 Bluetooth technology to establish a wireless connection with devices, allowing freedom of movement while enjoying audio.
• Pairing: Turn on the headset and enable Bluetooth on your device (Computer, Mobile phone, Mac, Nintendo Switch). Set it to discoverable mode and search for new devices. Find "FC-200" in the searched device list and click to pair.
• Voice Prompt & LED Light: "Bluetooth Mode": Flashing Blue light; "Bluetooth Connected": Breathing Blue light.

Diagram showing the headset connecting via Bluetooth to a PC and a Nintendo Switch.

2. 2.4GHz Dongle Mode

• Delays ≤ 24ms (Ultra Low Latency).
• Compatible with PC/PS4/PS5. If using USB dongle to connect a Mac or Nintendo Switch, a USB-A to USB-C adapter may be needed (package not included).
• The 2.4GHz wireless dongle delivers a more stable signal and reduced latency.
• Pairing: Plug the USB 2.4GHz dongle into the C port of your device (PC, PS4, PS5), then turn on the headset. Find "Wireless Gaming Headset" in the Output Devices in the Sound Settings and click on Pairing. While waiting for pairing, the LED will be green and blinking slowly.
• Voice Prompt & LED Light: "Dongle Mode": Flashing Green light; "Dongle Connected": Breathing Green light.

Diagram showing the headset connecting via 2.4GHz dongle to a PC and a PlayStation console.

Tips for Setting Up the Device When the Headset is Connected

(1) PC Connection Setup

• Open "Control Panel" and click "All Control Panel Items."
• Right-click on "Wireless Gaming Headset" and select "Set as Default Device."
• Go to the "Recording" tab, then right-click on "Wireless Gaming Headset" and select "Set as Default Device."

(2) Mac Connection Settings

• Click on "System Preferences."
• Navigate to "Sound."
• In the "Output" tab, right-click "Wireless Gaming Headset" and select "Set as default device."
• In the "Input" tab, right-click "Wireless Gaming Headset" and select "Set as default device."

(3) PS4/PS5 Connection Settings

• Click "Settings" on the screen.
• Go to the "Devices" tab.
• Click the "Audio Devices" tab.
• Set "Wireless Gaming Headset" as the default device for both "Input Device" and "Output Device" by right-clicking it.
• Adjust "Volume Control (Headset)" as needed.

(4) Nintendo Switch Connection Settings

• Turn on your Nintendo Switch then plug the Nintendo Switch into the docking station and connect the monitor.
• Connect the wireless adapter to a USB port on your Nintendo docking station.
• Press the power button on the headset for 3 seconds to power on.

Warm Tips

1. Pressing the "mic button" and "RGB light button" simultaneously for 6 seconds will clear all Bluetooth devices.
2. To maintain normal battery life, use the product at least once every two weeks and charge the headset in time after use.
3. If there's no sound from the microphone or headset during use, it may be due to compatibility issues or improper use. Contact the after-sales service team for assistance.
4. For your safety, refrain from using the headset while cycling or driving, and avoid listening to music at high volumes for extended periods. Handle with care to prevent any damage to the appearance or functionality. Specifications are subject to change without prior notice.

Specifications

• Model: FC-200
• Charging: USB-C
• Bluetooth version: V 5.4
• Wireless/Bluetooth range: 10m/33ft
• Drive diameter: Φ50 mm
• Frequency response range: 20Hz~20kHz
• Working voltage: 3.7V
• Battery capacity: 1200mAh
• Battery charging voltage/current: 5V/1A
• Battery time: charging about 2.5Hr, using about 50Hr (RGB Off and the 30% volume)
• Support RGB changing lighting effect.

Warranty Policy

FACHIXY products have a 12-month limited warranty from the original purchase date. If any issues arise, please contact the support team for assistance. For more information, visit the FACHIXY official website: http://fachixy.com

Product Warranty

To apply for after-sales service, please fill out the product warranty card according to your actual situation. Then send the completed warranty card back to the merchant where you purchased the product.

1. Please tick the reason for after-sales:

[ ] Quality [ ] Style look [ ] Uncomfortable [ ] other: _______________

2. Please tick the after-sale options you need:

[ ] Replacement [ ] Repair [ ] Return

3. Please give us your valuable comments: _______________________________

Note: Please consult the merchant for the specific after-sales address.

FCC Compliance Information

This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: 1) this device may not cause harmful interference, and 2) this device must accept any interference received, including interference that may cause undesired operation.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

Radiation Exposure Statement

This device complies with RF radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

Manufacturer and Compliance Information

Fachixy logo.

EC REP: MARWAY Consulting UG (haftungsbeschränkt), Am Maibusch 108-110, 45883 Gelsenkirchen, Germany. Contact: 0049 17645084650, MARWAY.UG@outlook.com

UK Contact: KOVA ASSOCIATES LTD, Business Address: 72a Kingston Road, Portsmouth, Hampshire, PO2 7PA, United Kingdom. Louisa Timms. Phone number: +44 2380970315, Email address: KOVA.Compliance@outlook.com

Manufacturer: Dongguan Huawei Technology Co., Ltd, Address: Room 101, Building 1, No. 39 Yongping Lane, Dongshan, Qishi Town, Dongguan City, Guangdong Province.

Made in China