Ecler BIO-X8G
Digital Processors & Matrixes
EclerPLEX Expansion Interface 8x8 Analogue Audio 8x8 GPIO
Product Overview
The BIO-X8G is an affordable expansion interface that scales up an EclerPLEX digital host matrix. It adds 8 input and 8 output analogue audio ports, 8 GPI ports, and 8 GPO ports to the host matrix's default configuration. Up to two BIO-X8G units can be linked to a single EclerPLEX host matrix, expanding the total matrix size to 24 analogue audio input ports, 24 analogue audio output ports, and 24x24 GPIO control ports.
Key Features:
- EclerPLEX audio I/O & control expansion unit, compatible with VIVO host units.
- Connection via X-link to the VIVO host unit (includes a 1m Ecler certified X-link cable).
- Expansion features (added to the host VIVO unit's capabilities):
- 8 MIC / LINE analogue audio inputs ports (with +48V Phantom selectable per port).
- 8 LINE analogue audio output ports.
- 8 GPI ports.
- 8 GPO ports.
- A maximum of 2x BIO-X8G units can be connected to a single VIVO host unit, utilizing its 2x X-link expansion ports.
Applications:
- Retail
- Corporate
- Sports & Wellness
- Hospitality
Technical Specifications
Audio Converters
Parameter | Value |
---|---|
Sampling rate | 48 kHz |
Resolution | 32 bit |
Latency | <4ms |
Frequency response | 10Hz to 20kHz (-0,5 dB) |
Dynamic range | ADC: 115dB, DAC: 115dB |
Analogue Audio Input Ports
Parameter | Value |
---|---|
Number of input ports | 8, MIC/LINE level |
Connection type | Euroblock, 3-pin, balanced |
Input sensitivity | -32,5 dBV to +18,5 dBV / -30,3 dBu to +20,7 dBu |
Input impedance | 7kΩ (balanced), 3.8kΩ (unbalanced) |
Max input level | 18,5 dBV / 20,7 dBu |
Mic preamp EIN | <-129,5 dBV / <-127,3 dBu |
Dynamic range | Gain 0 dB: >110,2 dB / >109,5 dBu Gain 21 dB: >105,5 dB Gain 42 dB: >99,5 dB |
THD + Noise | Gain 0 dB & Vin 0 dBV: 0,0025% Gain 21 dB & Vin -21 dBV: 0,0026% Gain 42 dB & Vin -42 dBV: 0,0044% Gain 51 dB & Vin -51 dBV: 0,0085% Gain 0 dB & Vin +17 dBV: 0,0010% Gain 21 dB & Vin -4 dBV: 0,0015% Gain 42 dB & Vin -25 dBV: 0,0010% Gain 51 dB & Vin -34 dBV: 0,0015% |
CMRR | >70dB typ (1kHz) / >60 dB typ (20 Hz - 20kHz) |
Phantom power | +48VDC, 10mA per input max |
Analogue Audio Output Ports
Parameter | Value |
---|---|
Number of output ports | 8, LINE level |
Connection type | Euroblock, 3-pin, balanced |
Max output level | 18,5 dBV / 20,7 dBu |
Output impedance | 300Ω (balanced), 150Ω (unbalanced) |
Dynamic range | > 112,5 dB |
Crosstalk | > 95dB |
Connectivity
Parameter | Value |
---|---|
Remote Control Connections | X-LINK: 1, X-LINK port USB-C connector |
GPIs | 8, 0 to 12VDC |
GPOs | 8, 3 poles isolated relay; Contact rating: 2A, 30VDC; 0,5A, 125 VAC |
Electrical
Parameter | Value |
---|---|
Power supply | Internal, Universal, regulated switching mode supply |
AC mains requirement | 90-264 VAC @ 47-63Hz |
AC mains connector | IEC C14 inlet |
Power consumption | 13 W / 25 VA |
Heat load | 44,5 BTU/hour |
Ventilation | FAN |
Physical
Parameter | Value |
---|---|
Operating temperature | Min: 0°C; 32°F / Max: 50°C; 122°F |
Operating humidity | 5-85% RH, non-condensing |
Storage temperature | Min: 0°C; 32°F / Max: 50°C; 122°F |
Storage humidity | 5-85% RH, non-condensing |
Installation options | Desktop, 19" racks (1RU) |
Included accessories | 1x EU Mains cord, 1x Multiplug Mains cord, 4x Washers, 4x Rubber feet, 1x USB-C Ecler X-Link certified cable, 16x Euroblock connectors (green colour), 16x Euroblock connectors (blue colour), 1x USB holder, 1x Screw. |
Dimensions (WxHxD) | 482.4 x 44 x 214 mm / 18.99 x 1.73 x 8.43 in. |
Weight | 3.0 kg / 6.6 lb |
Shipping dimensions (WxHxD) | 585 x 75 x 385 mm / 23.03 x 2.95 x 15.15 x in. |
Shipping weight | 4.45 kg/10.25 lb |
Mechanical Diagram
The BIO-X8G unit is a 1RU rack-mountable device. The front panel features an on/off switch and a USB-C port. The rear panel includes multiple Euroblock connectors for audio and GPIO connections, as well as ventilation grilles.
Dimensions:
- Width: 482.4 mm (18.99 in)
- Height: 44 mm (1.73 in)
- Depth: 214 mm (8.43 in)