Ozobot Ari Classroom Kit

Product Information and User Guide

Kit Contents

Access Lesson Content

Visit classroom.ozobot.com or scan the QR code to access tracks, printouts, and more that pair with Ari's lesson apps.

User Manual and Information

For the most up-to-date user manual and information, please visit www.ozobot.com/manuals. Not all devices are compatible; check the website for details.

Marker Washing Instructions

Marker ink washes from skin with warm, soapy water. For washable fabrics, immediately launder in hot water and detergent without prewash or chlorine bleach. Multiple wash cycles may be required. Keep markers away from wallpaper, painted walls, finished and unfinished wood, vinyl, carpeting, and other stainable materials. Markers are for external use only and should not be ingested.

Safety Warnings

AWARNING: CHOKING HAZARD

Small parts. Not for children under 3 years of age.

AWARNING: Not suitable for children under 3 years of age due to small parts + small balls. Danger of choking!

Please retain this information for future reference.

ACAUTION: Class 1 Laser.

Avoid long-term viewing of laser. Conforms to the requirements of IEC 60825-1.

AWARNING: This toy produces flashes that may trigger epilepsy in sensitized individuals.

Use only with the output of charger: 12V DC, 5.5A supply.

This toy is only to be connected to equipment bearing either of the following symbols: [power-symbol]

See reverse for safety information.

Battery Information

To reduce risk of fire or burns, do not attempt to open, disassemble, or service the battery pack. Do not crush, puncture, short external contacts, expose to temperatures above 60°C (140°F), or dispose of in fire or water.

The transformer, power supply, or battery charger used with the device should be regularly examined for damage. Do not use if damaged. Toys contain non-replaceable batteries.

Battery: 3.7V, 1050mAh (3.7*1.050=3.89Wh).

Compliance and Technical Specifications

Conforms to the requirements of ASTM standard consumer safety specifications on Toy Safety F963. Conforms to ASTM D4236.

FCC Compliance Statement:

1. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.

2. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

The device has been evaluated to meet general RF exposure requirement. This equipment should be installed and operated with a minimum distance of 20 cm between the radiator and your body.

IC Compliance Statement:

This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.

FCC AND IC RADIATION EXPOSURE STATEMENT:

This equipment complies with FCC and Canada radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Ozobot Ari is a USB-compatible device. Use the USB-C port for charging and file transfers of user Ozobot Blockly programs.

CAUTION: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Ozobot Ari can operate to a high rate of speed. Use with caution when playing on elevated surfaces.

The product may turn off during use in the presence of electrostatic discharge (ESD). Normal operation can be resumed by restarting the device.

The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Ozo Edu., Inc. dba Ozobot is under license. Apple and the Apple logo are trademarks of Apple Inc., registered in the U.S. and other countries. App Store is a service mark of Apple Inc. Google Play is a trademark of Google Inc.

CAN ICES-3 (B) / NMB-3 (B)

Bluetooth Technical Specifications:

Hereby, Ozo Edu., Inc. declares that the Ozobot Ari is in compliance with RED 2014/53/EU. The full text of the EU DOC is available at the following internet address: ozobot.com

For more information contact us at info@ozobot.com

Limited Warranty

Ozobot limited warranty information is available online: www.ozobot.com/supply/warranty.

ISED Statement:

This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada's licence-exempt RSS(s). Operation is subject to the following two conditions:

  1. This device may not cause interference.
  2. This device must accept any interference, including interference that may cause undesired operation of the device.

This equipment should be installed and operated with a minimum distance of 20 cm between the radiator and your body.

Le pré sent appareil est conforme aux CNR d'Industrie Canada applicables auxappareils radio exempts de licence. L'exploitation est autorisé e aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter toutbrouillage radioé lectrique subi, mê me si le brouillage est susceptible d'en compromettre lefonctionnement.

Cet é quipement doit ê tre installé et utilisé avec une distance minimale de 20 cm entre le radiateur et votre corps.

ACHTUNG! Für Kinder unter 3 Jahren nicht geeignet. Erstickungsgefahr. Kleine Teile + kleine Kugeln. Bitte verwahren diese Hinweise für eine eventuelle Korrespondenz.

ATTENTION! Ne convient pas aux enfants de moins de 36 mois en raison des petites pièces + petites boules. Risque de suffocation par ingestion! Conservez ces indications pour une éventuelle correspondance.

UWAGA! Nie dla dzieci poniżej 3 lat, małe części + małe kulki - ryzyko połknięcia! Prosimy zachować te uwagi do ewentualnej korespondencji.

WAARSCHUWING! Niet geschikt voor kinderen jonger dan 3 jaar, kan gevaarlijk zijn omwille van kleine stukjes die kunnen loskomen en/of kleine onderdelen die kunnen ingeslikt worden - verstikkingsgevaar.

VARNING! Ej lämplig för barn under 3 år, kan vara farligt på grund av små bitar som kan lossna och/eller små delar som kan sväljas - kvävningsrisk.

Produit conforme aux recommandations de la norme ASTM F963 pour la protection du consommateur et la sécurité des jouets. Produit conforme à la norme ASTM D 4236. Accumulateur de 3.7v, 1050mAh. Courant maximum en cours d'utilisation: 150 mA. Produits et couleurs peuvent changer sans préavis. L'accumulatear nest pas remplaçable. Veuillez garder cet emballage comme référence.

Product Details

FCC ID: 2BN3K-050101

IC: 28624-050101

Ari model: 050101

Ages: 5+

Product name: Ari Classroom Kit-18 Bots

SKU: 501801ARI

Produced in: Guangdong, China

Charger input: 12V===5.5A

Charger output: USB-A 5.0V=-=0.5A, USB-C 5.0V === 3.0A

Manufactured by: Ozo Edu., Inc.

Ozobot®™ ©2024

Ozo Edu., Inc.

190 Newport Center Drive, STE 150

Newport Beach, CA 92660

Phone: 310-318-0070

Email: support@ozobot.com

Rev: 3-24

Models: 050101, 2BN3K-050101, 2BN3K050101, ari Classroom Kit, ari, Classroom Kit, Kit

PDF preview unavailable. Download the PDF instead.

GetApplicationAttachment.html?id=8140815 Adobe Illustrator 29.1 (Macintosh) Adobe PDF library 17.00

Related Documents

Preview Ozobot Bit+ Quick Start Guide
A concise guide to getting started with your Ozobot Bit+ robot, covering setup, basic operation, and features for educational play and coding.
Preview Ozobot Ari User Manual and Safety Information
Comprehensive user manual and safety guidelines for the Ozobot Ari, covering product usage, warnings, compliance statements, and technical specifications.
Preview Ozobot Color Codes Chart and Reference Guide
A comprehensive guide to Ozobot color codes, detailing speed, direction, special moves, timers, wins/exits, and counter commands with their corresponding RGB/BK sequences.
Preview Ozobot Evo Quick Start Guide
Learn how to connect, explore features, and charge your Ozobot Evo robot with this quick start guide.
Preview Ozobot OzoGees Sun, Earth & Moon Model Quick Start Guide
A quick start guide for the Ozobot OzoGees Sun, Earth & Moon Model STEAM kit, detailing assembly, activities, and running Ozobot Blockly programs.
Preview Ozobot Solar System Model Quick Start Guide - Educational STEAM Kit
Explore the cosmos with the Ozobot Solar System Model Quick Start Guide. This educational STEAM kit provides hands-on activities, planet information cards, and assembly instructions for students to build and learn about our solar system. Features include a detailed solar system board, punchable planet components, and interactive matching cards. Ideal for classroom or home learning, requiring an Ozobot Evo robot for certain activities. Visit classroom.ozobot.com for more lessons.