Oraimo UltraCleaner Scrubber 4 (OSS-204A) User Manual
Keep Exploring
Brand: Oraimo
Model: OSS-204A ELECTRIC SPIN SCRUBBER
Website: us.oraimo.com
Contact: contact@oraimo.com
Package Contents
- 1 x Spin Scrubber
- 1 x Flat brush
- 1 x Corner brush
- 1 x Connector bracket
- 1 x Scouring pad
- 1 x Soft cloth
- 1 x Cleaning ball
- 1 x Charging cable
- 1 x Mesh bag
Product Overview
The Oraimo UltraCleaner Scrubber 4 is an electric spin scrubber designed for various cleaning tasks. The device features:
- Display Screen: Shows operational status.
- Power Button: Turns the device on/off.
- Spin Speed Button: Adjusts the rotation speed.
- Charging Port: For recharging the device.
- Main Handle: Ergonomic grip for comfortable use.
- Lanyard: For secure carrying or hanging.
[Diagram: A hand-held electric scrubber with labels pointing to the display screen, power button, spin speed button, charging port, main handle, and lanyard.]
LED Display Indicators
- Lack of power: The last frame of the power light flashes white.
- Charging: The corresponding power light flashes white.
- Fully charged: The power icon lights up for a long time.
- Blocking rotation: The white light of the corresponding gear icon flashes.
[Diagram: Icons representing power levels (display, low speed, middle speed, high speed) with corresponding LED indicator lights.]
Specifications
| Model | OSS-204A |
|---|---|
| Battery Capacity | 2500mAh |
| Input | 5V-2A |
| Rated Voltage | DC 3.7V |
| Waterproof Rating | IPX7 |
Product Operation Instructions
Accessories Usage
- Flat Brush: For cleaning small areas like hand basins, bathtubs, showers, countertops, kitchen counters, and tile walls.
- Corner Brush: For cleaning faucets, countertop crevices, edges, corners, cracks, kick lines, and narrow places.
- Scouring Pad: For stubborn stains in kitchens and bathrooms, stoves, and hard surfaces (tiles, metal). Aids in polishing surfaces that are not easily scratched.
- Soft Cloth Brush: For mirrors, glass windows, painted surfaces, leather sofas, and cars.
- Cleaning Ball: For kitchen utensils, tableware, stoves, and kitchen countertops.
How to Use
Step 1: Select the desired brush head and attach it to the machine.
[Diagram: Illustration showing a brush head being attached to the main unit.]
Step 2: Pre-treat the surfaces to be cleaned. Immerse the area in water and use appropriate cleaning agents to remove dirt, stains, grease, paint, or old sealant.
[Diagram: Illustration showing a surface being cleaned with water and a cleaning agent.]
Step 3: Place the brush head tip on the clean surface. Turn on the machine using the power button, then select the required speed by pressing the spin speed button.
[Diagram: Illustration showing the scrubber in use on a surface, with buttons being pressed.]
Step 4: After cleaning, switch off the machine, rinse and dry the brush head, and then stow them away.
[Diagram: Illustration showing the scrubber being rinsed and dried.]
Tips
- Fully charge the machine before the first use. A Type-C charging cable is provided for waste reduction; a conventional 5V 2A charger can also be used.
- When stopping use, turn off the machine first, then lift it to remove the brush head to prevent liquid splashing.
- The product has three speed gears: low and medium for most scenarios, and high for stubborn stains. High speed may cause spray; choose speed appropriately.
- The scouring pad and cleaning ball are for heavy-duty cleaning and should not be used on easily scratched surfaces like painted ones.
Charging Instructions
Please keep the machine charging port dry before charging.
- Open the silicone plug of the charging port at the tail of the handle and connect the charging cable.
- Plug the charger into the socket to start charging. The power icon will flash, and the machine will charge normally. The icon stays lit when fully charged.
- After full charge, tighten the silicone plug to prevent water entry.
[Diagram: Sequence showing connecting the charging cable to the port and plugging into a socket.]
Troubleshooting
If problems persist, contact Customer Support at contact@oraimo.com.
| Problem | Solution |
|---|---|
| Can't be charged |
|
| Brush head stops working |
|
| Brush hair deformation / Brush head damage |
|
| Short usage time |
|
Attention
- Read instructions carefully before first operation and keep them for reference.
- This product is not a toy. Close supervision is required when children use it. Keep out of reach of children.
- If any abnormal noise, odor, smoke, or malfunction occurs, turn off the device, unplug it, and contact customer support immediately. Do not attempt self-repair.
- Do not store or use near high temperatures.
- Suitable for home use only, not commercial or industrial use.
- Keep hair, loose clothing, and body parts away from moving parts.
- Do not use the device while charging.
- Wear rubber gloves and eye protection to avoid splashing soap/detergent.
- Do not submerge the product in water for extended periods. If water enters the charging port, shake out liquid and air dry for at least 24 hours.
- After use, rinse the brush head with clean water, dry it, and store in a cool, dry place. Do not wash the machine in a washing machine.
- Normal heat radiation from the motor during prolonged use is expected. If it affects operation, take a break.
- Avoid pressing the brush head with excessive force for prolonged periods, as this can damage it.
Warranty Certificate
This product is covered by a guarantee from the date of purchase. The warranty is valid only when the warranty card is properly completed. Warranty is limited to the core product; accessories are not covered. For questions or issues, contact us for a satisfied shopping experience within 24 hours.
Customer's Name: [____________________]
Order ID: [____________________]
Product Model: [OSS-204A]
Problem Description: [____________________]
Made in China
Scan to Visit Our Website: us.oraimo.com
Contact: contact@oraimo.com
[Image: 365 Days Warranty logo]
